Large-strand-count Litz wire (LLW) coils are commonly utilized in high-power wireless power transfer systems. An accurate ac-resistance prediction method of LLW coil is necessary to select the proper operation frequency dedicated for the highest coil quality factor and system efficiency. However, most present literatures ignore the interstrands nonuniform current distribution (NCD) of LLW caused by the soldering tins at terminals, which leads to a high ac-resistance prediction error. This article develops a method extracting the NCD among strands based on the two-dimension finite element analysis and strands probability transposition. And an improved ac-resistance prediction method considering the NCD is proposed subsequently, which is primarily applicable to LLW containing over 500 strands. Moreover, a novel strand edge-soldering connector (SEC) is designed to mitigate NCD and thereby reducing ac-resistance. Finally, the satisfactory accuracy of improved ac-resistance prediction for LLW circular coils up to 1000 strands is verified experimentally. Then, the proposed SEC prototype is measured with a maximum resistance reduction of 33.28%, which demonstrates the effectiveness of the proposed NCD mitigation method.
11 September 2023 in IEEE Transactions on Transportation Electrification
The interference caused by sudden load change in the wireless shore power system (WSPS) weakens the stability of the system. Thus, a pulse interference suppression strategy is proposed, which adopts a power allocation method based on work mode recognition algorithm (WMRA). The method realizes that the pulse load power is preferentially provided by the wireless power transfer system (WPTS), making full use of the shore power. If the WPTS cannot meet the total power demand, the insufficient part is provided by the hybrid energy storage system (HESS). For the HESS at the ship-side, an improved virtual impedance parameter design method is proposed to achieve power reallocation between the lithium battery and the supercapacitor. The high-energy-density of lithium batteries and the high-power-density of supercapacitors can be fully utilized by this method. A prototype is built to verify the proposed strategy. Experiments show that the DC load voltage on the ship-side can be quickly stabilized after being disturbed by a pulse load.
6 August 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper investigates a LPV-based output voltage mitigation method for the capacitive wireless power transfer (CPT) system employing a series Buck converter under varying mutual capacitance conditions. A linear parameter varying (LPV) model is utilized to represent the dynamics of the Buck converter under input voltage fluctuations. Based on the estimated model, a robust controller is designed using the normalized coprime factorization (NCF) approach to ensure system stability and performance. Experimental results demonstrate the effectiveness of the proposed method. The system achieves rapid voltage regulation and maintains stable output voltage under various disturbance frequencies and load conditions. These findings validate the robustness and adaptability of the proposed control strategy, offering a reliable solution for enhancing the performance of CPT systems.