Hubei Key Laboratory of Power Equipment & System Security for Integrated Energy, School of Electrical Engineering and Automation, Wuhan University, Wuhan, China
Auto-generated profile, based on publicly available information
Shuaiqi Li
Hubei Key Laboratory of Power Equipment & System Security for Integrated Energy, School of Electrical Engineering and Automation, Wuhan University, Wuhan, China
In the field of control-oriented modeling of wireless power transfer (WPT) system, it is urgent to establish a simple model to reflect the nonlinear characteristics introduced by phase-shift control methods, which is significant to the design of controllers. Due to the nonlinear nature introduced by phase-shift control, controllers designed based on specific steady-state small-signal models struggle to maintain closed-loop dynamic performance. In this article, the nonlinearities of the WPT system are implicitly considered by using the Hammerstein model-based identification (HMI) method, so the accuracy of the identified model is guaranteed even if the working point changes, which is unique advantage compared with other methods. In particular, an uncertainty model is precisely established via a frequency-domain analysis approach to introduce the nonlinear characteristics and the statistical properties of identification into the H $\infty$ control problem, which maintains the robustness of closed-loop WPT system. Finally, an experiment is given to verify the effectiveness of HMI method and proposed H $\infty$ robust controller.
1 January 2025 in IEEE Transactions on Industrial Electronics
Large-strand-count Litz wire (LLW) coils are commonly utilized in high-power wireless power transfer systems. An accurate ac-resistance prediction method of LLW coil is necessary to select the proper operation frequency dedicated for the highest coil quality factor and system efficiency. However, most present literatures ignore the interstrands nonuniform current distribution (NCD) of LLW caused by the soldering tins at terminals, which leads to a high ac-resistance prediction error. This article develops a method extracting the NCD among strands based on the two-dimension finite element analysis and strands probability transposition. And an improved ac-resistance prediction method considering the NCD is proposed subsequently, which is primarily applicable to LLW containing over 500 strands. Moreover, a novel strand edge-soldering connector (SEC) is designed to mitigate NCD and thereby reducing ac-resistance. Finally, the satisfactory accuracy of improved ac-resistance prediction for LLW circular coils up to 1000 strands is verified experimentally. Then, the proposed SEC prototype is measured with a maximum resistance reduction of 33.28%, which demonstrates the effectiveness of the proposed NCD mitigation method.
11 September 2023 in IEEE Transactions on Transportation Electrification
The interference caused by sudden load change in the wireless shore power system (WSPS) weakens the stability of the system. Thus, a pulse interference suppression strategy is proposed, which adopts a power allocation method based on work mode recognition algorithm (WMRA). The method realizes that the pulse load power is preferentially provided by the wireless power transfer system (WPTS), making full use of the shore power. If the WPTS cannot meet the total power demand, the insufficient part is provided by the hybrid energy storage system (HESS). For the HESS at the ship-side, an improved virtual impedance parameter design method is proposed to achieve power reallocation between the lithium battery and the supercapacitor. The high-energy-density of lithium batteries and the high-power-density of supercapacitors can be fully utilized by this method. A prototype is built to verify the proposed strategy. Experiments show that the DC load voltage on the ship-side can be quickly stabilized after being disturbed by a pulse load.
Direct-starting of industrial motors has problems such as large current impact (five to eight times the rated current), mechanical stress damage, and low energy efficiency. This paper explores the technological innovations in motor soft-start driven by intelligent control and wide-bandgap semiconductors, and constructs a highly reliable and low energy consumption solution. Firstly, based on a material–device–algorithm system framework, a comparative study is conducted on the performance breakthroughs of SiC/GaN in replacing silicon-based devices. Secondly, an intelligent control model is established and a highly reliable system architecture is developed. A comprehensive review of recent literature indicates that SiC devices can reduce switching losses by up to 80%, and intelligent algorithms significantly improve control accuracy. System-level solutions reported in the industry demonstrate the capability to limit current to 1.5–3 times the rated current and achieve substantial carbon emission reductions. These technologies provide key technical support for the intelligent upgrading of industrial motor systems and the dual-carbon goal. In the future, development will continue to evolve in the direction of device miniaturization and other directions.