Technical University of Munich, School of Engineering and Design, Department of Energy and Process Engineering, Chair of Electrical Energy Storage Technology, 80333 Munich, Germany
Auto-generated profile, based on publicly available information
Andreas Aufschläger
Technical University of Munich, School of Engineering and Design, Department of Energy and Process Engineering, Chair of Electrical Energy Storage Technology, 80333 Munich, Germany
Cylindrical 18650 and 21700 lithium-ion batteries are produced with small gaps between the jelly roll and the case. The size of these gaps and the mechanical attachment of the jelly roll to the case can have a significant impact on the thermal and mechanical properties of cells. To investigate the influence of the state of charge (SOC) and state of health (SOH) on the size of the gap, computed tomography (CT) and gray-value analysis was conducted with various cell types at 0% and 100% SOC and after cycling. The results show a significant influence of the SOC on the gap for new cells and a substantial reduction in the gap during the first cycles.
1 May 2025 in Journal of the Electrochemical Society
Volume and subsequent porosity changes of lithium-ion cells during charge-discharge cycles are major challenges in the development of high-performance and long-lasting batteries. This work presents a novel coupled electrochemical-mechanical modeling approach to describe porosity changes due to intercalation and external compression. Based on the Doyle-Fuller-Newman model, the electrochemical model is extended by incorporating a mechanical model grounded in solid mechanics. The elasticity of the anode, separator, and cathode is modeled as poroelastic to account for the non-linear stress-strain behavior of these porous materials. A porosity model to calculate the local changes in porosity is introduced and discussed. The coupled model is validated against a 70.2A h cell regarding cell voltage, reversible cell swelling, and pressure increase for C-rates between C/20 and 1C, achieving a root-mean-squared error ≤12 mV in cell voltage and <7% in reversible cell swelling. Simulation studies reveal that mechanical aspects significantly impact electrochemical performance, potentially leading to earlier lithium plating. Furthermore, the mathematical formulation shows that porosity changes alone have minimal impact on performance, and that effective mass transport should be updated based on porosity changes. The model prediction regarding internal states like porosity and volume changes aligns with the literature.