Shynar Aitkazinova

Shynar Aitkazinova

Auto-generated profile, based on publicly available information

Shynar Aitkazinova

Satbayev University

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

25 December 2022 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
SASh Aitkazinova
Sh Aitkazinova
OSOlena Sdvyzhkova
Olena Sdvyzhkova
NIN Imansakipova
N Imansakipova
Dmytro BabetsDmytro Babets
Dmytro Babets
DKD Klymenko
D Klymenko
Purpose. To develop techniques for estimating the pit wall stability in terms of occurring of a zone of heavily jointed rock mass during ore mining at the Akzhal deposit (Kazakhstan), to work out measures to strengthen the rock opening and to verify the effectiveness of the developed measures. Methodology. The finite element analysis of the rock stress-strain state is implemented on the basis of the elastic-plastic model and the generalized Hoek-Brown failure criterion. The rock mass quality was assessed using the RMR and GSI rating classifications. This made it possible to simulate a zone of intense fracturing by changing the characteristics of the jointed surface. The shear strength reduction procedure was used to determine the safety factor for the quarry wall. Findings. The strain distributions in the rock mass forming the quarry wall have been obtained in terms of the Akzhal polymetallic ore deposit (Kazakhstan). The case of creating a zone of heavily jointed rocks in the area of a tectonic fault was considered. The safety factor of the quarry wall was determined under conditions of increased rock fracturing, as well as after carrying out measures to strengthen the rocks with a hardening solution. Originality. The effect of intense jointness on the pit wall stability is demonstrated. A method for the consistent evaluation of the quarry wall stability is proposed considering the change in the rock properties due to natural factors and artificial reinforcement. It is shown that a change in the joint surface quality due to the hardening injection reduces the shear strains in the sliding zone. Practical value. The pit wall stability was predicted considering the formation of a zone of intense fracturing under mining and geological conditions of the Akzhal deposit. The possibility of testing the effectiveness of rock strengthening measures based on mathematical modeling was shown.

21 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
IVIvan Vassilyev
Ivan Vassilyev
ZMZhassulan Korabayevich Mendakulov
Zhassulan Korabayevich Mendakulov
BIBotakoz Imansakipova
Botakoz Imansakipova
SAShynar Aitkazinova
Shynar Aitkazinova
KIKaiyrtay Issabayev
Kaiyrtay Issabayev
GMGulmira Madimarova
Gulmira Madimarova
The article investigates the problems of mine hazard prevention, identification and control. Acoustic emission signals are one of the important signs of the appearance of deformations in rocks that can cause accidents in mines. Acoustic emission signals are quite broadband in nature. The article considers the task of the possibility of using broadband nature of acoustic emission signals to localize areas in which acoustic signals are generated for early warning of an emerging danger. The results of modeling of the process of localization of hazardous areas are presented. The proposed method is based on the frequency dependence of acoustic signal attenuation in rocks. Moving away from the signal source, not only changes its intensity, but also its spectrum. By measuring the intensity of acoustic signals in several spectral bands and knowing the frequency dependence of signal attenuation, it is possible to calculate at what distance from the receiving points the signal source should be located so that its spectral components would be changed as they are observed at the receiving points. This allows to localize the signal source. It is shown that four signal reception points and intensity measurements in two spectral frequency bands are sufficient to apply the method. It is shown that the proposed method allows not only to determine the coordinates of the local area of fracture formation, but also to restore the spectral characteristics of acoustic emission signals in the area of their occurrence, which can provide information about the mechanism of formation and development of processes of rock destruction.

15 October 2020 in Series of Geology and Technical Sciences
Verified
Journal Article
Closed access
ASAitkazinova Sh.A.
Aitkazinova Sh.A.
BАBek А.а.
Bek А.а.
DKDerbisov K.T.
Derbisov K.T.
DNDonenbayeva N.S.
Donenbayeva N.S.
NMNurpeissova M.B.
Nurpeissova M.B.
LЕLevin Е.
Levin Е.
Results of longstanding researches of Satbayev University scientists on the development of modified building materials to strengthen cracked mountain structures based on industrial waste are considered. Industrial processing of technogenic raw materials (enrichment and processing waste, overburden and enclosing rocks), which is similar in composition to natural and used in conventional trend, scarcely different from industrial processing of mineral raw materials. Creation of effective technologies for the processing of technogenic raw materials is an urgent task, which make it possible to obtain competitive products from it for various industries. Various methods of preparing solutions for strengthening of fractured rocks and building structures are analyzed. Research results of tailings of the Balkhash Mining and Metallurgical Combine and preparing solutions for strengthening fractured rocks and underground mining structures are presented. Rock mass strengthening in cracked areas is achieved by adding substances into the cracks, which after hardening and solidification with rocks, increase its shearing resistance characteristics. The most widespread hardening methods were cementation during mine workings (underground structures) in fractured rocks. Significance of obtained results for construction industry is in expansion and reproduction of raw material base of building materials industry through the use of Mining and metallurgical complex waste (tailings) and development of resource-saving technologies. Practical significance of work is in the detailed development of modified method for the production of building materials and products.

1 December 2021 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
BIBotakoz Imansakipova
Botakoz Imansakipova
SAShynar Aitkazinova
Shynar Aitkazinova
ASAuzhan Sakabekov
Auzhan Sakabekov
GSGulim Shakiyeva
Gulim Shakiyeva
MIMeruyert Imansakipova
Meruyert Imansakipova
OTOmirzhan TAUKEBAYEV
Omirzhan TAUKEBAYEV
Purpose. Development of a new approach to improving the accuracy of predicting situations in which the earth’s surface failures occur as a result of undermining a rock mass during the development of mineral deposits. Methods. The critical situations, including the earth’s surface failures, are predicted on the basis of assessing the value of geoenergy and studying its change as large volumes of rock mass are involved in mining. Analytical solutions based on the fundamental laws of physics and mechanics of continuous media are used. The research is performed using methods of cause-and-effect analysis. Findings. Based on the cause-effect relationship, determined between the change in the value of the mass geoenergy and deformation processes on the daylight surface of the field, an effective method has been developed for ranking it according to the degree of hazard of failure formation with the simultaneous use of two criteria. One of the criteria is determined by the relative change in geoenergy during the system transition from the initial (stable) state to the current one, which becomes unstable under certain conditions. The second criterion is formed on the basis of the change in geoenergy during the transition from the current (possibly unstable) state to the final (stable) state. Originality. For the first time, when zoning the daylight surface of a field according to the degree of hazard of failure formation, two ranking criteria are used simultaneously, based on the assessment of geoenergy accumulated in a heterogeneous mass, when it is undermined in the conditions of triaxial compression. Practical implications. The territory ranking method, developed on the basis of the used criteria for hazard of failure formation, allows improving the quality of situational control, predicting risk situations and their development, as well as optimizing the short-term and long-term plans for the development of mining operations.

30 October 2024 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
AUAsset Urazaliyev
Asset Urazaliyev
DSDaniya Shoganbekova
Daniya Shoganbekova
SKSh Kydyrkozhakyzy
Sh Kydyrkozhakyzy
MKMagzhan Kozhakhmetov
Magzhan Kozhakhmetov
SASh. K Aitkazinova
Sh. K Aitkazinova
One of the critical factors influencing the accuracy of a local geoid model is the quality of the digital elevation model (DEM). A properly selected high-resolution DEM can significantly mitigate errors in geoid modeling, gravity anomaly processing, and topography and downward continuation correction. Purpose. Evaluating the accuracy of five global DEMs obtained from open sources to identify the most suitable model for creating a local geoid. Methodology. The vertical accuracy of the DEMs was assessed by comparing the heights between the DEM and control points across different types of terrain. The reference values are based on 344 ground benchmarks, where GNSS observations were performed with subsequent adjustment of coordinates and heights. The accuracy analysis involved calculating statistical indicators of the height differences between the GNSS data and the DEM data. Findings. The standard deviation assessment showed favorable values for the COPERNICUS and ALOS DEMs, followed by SRTM, ASTER, and ETOPO. In the mean absolute error calculations for mountainous areas, the ALOS model performed best, followed by COPERNICUS, SRTM, ASTER, and ETOPO. For other types of terrain, COPERNICUS demonstrated the best results in mean absolute error. Originality. This study distinguishes itself through the incorporation of advanced high-resolution DEMs, such as GLO30, providing a modern and thorough evaluation of DEM accuracy specifically for Kazakhstan. What is new is a detailed analysis of the impact of terrain features (plain, hilly, mountainous) on modeling accuracy. This approach advances beyond previous assessments, delivering new and significant insights into the performance of contemporary DEMs. Practice value. The practical value of the results obtained consists in issuing recommendations regarding the possibility of using the studied DEM for the regions of Kazakhstan which differ among themselves in terms of landscape characteristics. The findings indicate that COPERNICUS and ALOS DEMs are highly suitable for precise geoid modeling in southern Kazakhstan. These models can significantly improve the accuracy of local geoid models, benefiting applications in geospatial science and engineering.