Plasma-enhanced atomic layer deposition was used to grow molybdenum disulfide films using (tBuN)2(NMe2)2Mo and a remote H2S-Ar plasma as coreactants on three different substrates: thermal oxide on silicon, c-plane sapphire, and epitaxial c-plane GaN on sapphire. Depositions were carried out at 250 °C. The substrates’ effect on the growth of MoS2 was investigated through resonance Raman spectroscopy, x-ray photoelectron spectroscopy, and atomic force microscopy. In addition, transmission electron microscopy was performed on films deposited on electron-transparent silicon nitride membranes. Films of 2H-MoS2 were deposited with atomic-level control of thickness under the deposition conditions studied. By analyzing the resonance Raman spectrum, it was found that higher degrees of crystallinity could be achieved on GaN or Al2O3 substrates compared to thermally oxidized silicon.
The performance of LEDs with Ga‐doped ZnO (Ga:ZnO) and Sn‐doped In 2 O 3 (ITO) current‐spreading layers (CSLs) has been evaluated at high injection current densities. LEDs with electron beam‐hydrothermally deposited Ga:ZnO transparent CSLs showed improved performance compared to electron beam deposited ITO at all current densities. External quantum efficiency and wall plug efficiency were both higher for blue emitting LEDs with ZnO. Luminous efficacy increased greatly for the ZnO‐based CSL with a peak value of 113 lm/W compared to 82 lm/W for the ITO‐based CSL, a 37% improvement.
Improved turn-on voltages and reduced series resistances were realized by depositing highly Si-doped n-type GaN using molecular beam epitaxy on polarization-enhanced p-type InGaN contact layers grown using metal–organic chemical vapor deposition. We compared the effects of different Si doping concentrations and the addition of p-type InGaN on the forward voltages of p–n diodes and light-emitting diodes, and found that increasing the Si concentrations from 1.9 × 1020 to 4.6 × 1020 cm−3 and including a highly doped p-type InGaN at the junction both contributed to reductions in the depletion width, the series resistance of 4.2 × 10−3–3.4 × 10−3 Ωcm2, and the turn-on voltages of the diodes.
11 January 2017 in Journal of Electronic Materials