29 July 2026 in Physica Scripta
DODihkrulahi Opadotun Oparinde
Dihkrulahi Opadotun Oparinde
+1
The transportation of fluids within the petroleum industry presents significant challenges, primarily due to the high cost and energy demand of current systems. These challenges are compounded when transporting multiple fluids, often necessitating separate pipelines or complex flushing procedures between different products. To address these issues, this research explored the feasibility of utilising a concentric piping system for transporting methane and diesel. The governing equations were formulated, and a 15 m-long concentric pipe prototype was modelled using ANSYS Fluent, a computational fluid dynamics (CFDs) software, to simulate two-fluid flow. To accurately capture turbulence effects, the standard K- ϵ turbulence model was employed, with no-slip boundary conditions applied to the pipe walls. The simulations generated results analysing velocity profiles, pressure drops (PDs), and other flow characteristics within a velocity range of 25–40 m s −1 . Findings indicated that the flow became thermally and hydrodynamically fully developed at 6 m downstream of the inlet. Additionally, the pressure decreased monotonically along the length of the pipe in the concentric configuration. At an inlet velocity of 25 m s −1 , the diesel’s temperature change over this region was minimal, whereas methane experienced significant temperature variations. Under the specified thermal boundary conditions, the average velocity of diesel is approximately 1.14 times the mainstream velocity, while methane exhibits more variable flow behaviour. The observed temperature ranges stay well below the autoignition points of methane (537 °C) and diesel (250 °C), indicating that the transportation of fluids via the proposed concentric system is feasible.