10 April 2025 in EMERGENCY MEDICINE
Background. The purpose was to demonstrate the potential of statistical assessment for determining shrapnel fragment temperature and velocity based on biomedical indicators of injury severity. Materials and methods. Chinchilla breed rabbits were selected as experimental material and subjects for modeling ballistic and shrapnel wound injuries. The scientific experiment was conducted as an active study having the controlled temperature and velocity of impacting shrapnel and bullets as the main influencing factors. Primary measurement data was collected using biophysical and biochemical examinations of the wounded animals. This data was then processed using methods of multivariate parametric statistics, validating the scientific findings with a specified level of confidence. Results. A statistically significant influence of the levels for the factors “Fragment temperature” and “Fragment linear velocity” on the selection of optimal subsets of biomedical indicators maximally correlated with observation time has been proven. The fundamental possibility of independent evaluation of the temperature values (according to the indicators “Alanine transaminase”, “Alkaline phosphatase”) and speed (according to the indicators “Total protein”, “Segmented neutrophils”) of damaging fragments during the initial examination of the wounded has been proven. Mathematical models (1) and (2) are presented for evaluating, respectively, the temperature and linear velocity of the fragment. It has been shown that the given errors in distinguishing between temperature and velocity levels are within the range of 25–30 % for a confidence probability of P = 0.8, and the error for the speed evaluation of a fragment is less than its temperature evaluation. The increased accuracy of fragment velocity evaluation provides additional information about the depth of the wound, which is another positive result of the study. Conclusions. A statistically significant influence of the levels for the factors “Fragment temperature” and “Fragment linear velocity” on the selection of optimal subsets of biomedical indicators maximally correlated with observation time has been proven. The fundamental possibility of independent evaluation of the temperature values (according to the indicators “Alanine transaminase”, “Alkaline phosphatase”) and speed (according to the indicators “Total protein”, “Segmented neutrophils”) of damaging fragments during the initial examination of the wounded has been proven. Mathematical models are presented for evaluating, respectively, the temperature and linear velocity of the fragment. It has been shown that the given errors in distinguishing between temperature and velocity levels are within the range of 25–30 % for a confidence probability of P = 0.8, and the error for the speed evaluation of a fragment is less than its temperature evaluation. The increased accuracy of fragment velocity evaluation provides additional information about the depth of the wound, which is another positive result of the study. The statistical reliability of regression models for estimating shrapnel temperature and velocity has been confirmed through biophysical experimental results. This approach expands the informational foundation for developing treatment technologies in shrapnel wounds.
10 October 2023 in Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units
This article is devoted to the research, construction, configuration and implementation of a virtual device for monitoring the condition of nodes ofcomplex industrial units. Modern units used in heavy engineering require no less modern means of management, control and diagnostics of damage tosuch units and their components. The development of the structure of control tools is based on multi-level or multi-stage procedures of transformationsof incoming measuring signals from aggregates. As the structure of the control device, a structure with a two-stage implementation of the spectraltransformation of measurement signals – with a primary static transformation and a secondary static transformation – was chosen. The basis of theprimary static transformation is the spectral transformation procedure based on the wavelet transformation. The basis of the secondary statictransformation is the procedure of linear discrimination with the indication of the decisive rule. The article demonstrates and implements approaches tobuilding a virtual device in terms of creating a block diagram, developing software, organizing the front panel of the device, setting up and carryingout simulation modeling for blocks of primary and secondary static transformations. The research uses the LabView platform. To prepare incomingmeasurement signals from nodes of industrial units, in the first block, the procedures of graduation, calibration and normalization of the target functionare carried out. To receive input measuring signals from units of industrial nodes, the COM port of the computer is used which, according to thedeveloped program, polls the COM port and inputs measuring signals to the primary static transformation procedure. The article describes a completevirtual control device that is formed and tested, which structurally contains all the blocks for achieving the control result and indicating the controlresult on the graphic interpretation of the computer.
27 December 2024 in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
ОФОлексій Михайлович Фіногенов
Олексій Михайлович Фіногенов
+3
The article examines the properties of a mechanical robot and provides recommendations for changes in its design. The relevance of the use of robots in the world is beyond doubt, such robots are used in places that pose a danger to humans or are inaccessible to humans. In each case, the accuracy of positioning and the accuracy of the robot's actions directly affect the efficiency of the tasks assigned to the robot. Practicing robot movements traditionally takes place at robotics competitions, which are widely held around the world. In recent robotics competitions, one of the exercises in the competition was an exercise where the robot had to hang from a beam using its mechanical levers. The researched robot oscillates in the air while hanging on a crossbar on mechanical levers. In the studies, the task was to overcome these negative phenomena - mechanical oscillations, by studying the problem and conducting physical research. In order to conduct physical research and study the issue, a decision was made to replace the real object – the robot – with an appropriate replacement structure. For such a replacement design, a physical pendulum (classical and reversible) is adopted. In physical pendulums, the main parameter is the moment of inertia I, which is determined from the formula: , where m is the mass of the pendulum, g is the acceleration of free fall, d is the distance from the axis of the suspension to the center of mass of the pendulum, T is the oscillation period of the pendulum. The accepted hypothesis is that an increase in the moment of inertia of a real object will lead to the need to increase the force that forces this object to swing. Experimental installations were formed during laboratory research; measured variables – I, independent variables – g, T, dependent variables – m, d were analyzed; experiments were carried out to assess the impact on the moment of inertia I of the distance from the suspension axis to the center of mass of the pendulum d and the influence on the moment of inertia I of the mass of the pendulum m. The obtained results of physical research allow us to provide recommendations on changing the design of a real object - a robot. The recommendations make it possible to eliminate the negative phenomenon – rocking the robot on the crossbar, which will allow to perform the corresponding task better. These recommendations include the following: 1. Load the structure as much as possible by increasing the mass m. 2. Extend the robot levers as much as possible by increasing the distance d. 3. Lower the center of gravity of the robot as much as possible. After making constructive changes in the structure of the robot, it is planned to build its mathematical model for further research.
4 July 2025 in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
КККирило Дмитрович Коцкало
+3
The article addresses a practical scientific problem involving the optimization of obstacle-overcoming processes by a mechanical robot moving over rough terrain. The problem is approached through the identification, construction, and analysis of a mathematical model of the technological process of obstacle overcoming during bar suspension by the robot using mechanical levers, followed by mathematical and simulation modeling.The article presents substitution schemes of the real technological process based on the transmission of electrical signals within an electrical circuit. It also examines and analyzes the electrical parameters of mathematical models in the form of first- and second-order linear differential equations. Deficiencies affecting excessive oscillations of the mechanical robot are identified, and correlations are established between the electrical parameters of the substitution circuit and the real mechanical parameters of the robot during the execution of a defined mechanical action for overcoming obstacles. Proposals for optimizing these actions are provided, and directions for further research are formulated.Experimental trials conducted on a physical mechanical robot during a test exercise revealed the presence of damped oscillations in amplitude over time. The collected data enabled the development of a circuit-technical model of this technological process in the form of a series RLC electrical circuit. The analysis of the differential equation describing the behavior of parameters in the RLC circuit, expressed as a second-order differential equation, confirmed the adequacy of the mathematical model.To eliminate oscillatory processes during the robot's operation, a circuit-technical model in the form of an RL circuit was considered. This model reduced the order of the differential equation, resulting in a mathematical model represented by a first-order linear differential equation. The solution to this equation using the method of variation of parameters, along with the derivation of analytical expressions for both the general and particular solutions, enabled simulation modeling of the technological action of obstacle overcoming during bar suspension by the robot using mechanical levers.The simulation modeling demonstrated that the transient process in this case is an aperiodic exponential process. This indicates the detrimental effect of the reactive element C in the mathematical model, and its removal can effectively resolve the stated practical scientific problem.Establishing the correspondence between the resulting mathematical model of the electrical substitution circuit and the general equation of translational mechanical motion, as well as the parameters of these equations, made it possible to provide recommendations for eliminating the parameter C(φ), whose physical meaning lies in the variation of suspension stiffness and which is strongly dependent on suspension length.