Amparo Vivo

Amparo Vivo

Auto-generated profile, based on publicly available information

Amparo Vivo

European Synchrotron Radiation Facility (ESRF) 2 , 38043 Grenoble

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2016 in Review of Scientific Instruments
Verified
Journal Article
Closed access
AVA. Vivo
A. Vivo
BLB. Lantelme
B. Lantelme
RBR. Baker
R. Baker
RBR. Barrett
R. Barrett
X-ray mirror quality has continuously improved over the past 20 years and manufacturers are now able to provide long mirrors with slope errors below 0.2 μrad. Nevertheless, these mirrors are mounted on holders or even mechanical benders to adjust their curvature and their intrinsic quality must be preserved from any parasitic deformation such as twist. The most direct method of detecting these deformations is to measure the 3D topography of the optical surface. At the ESRF metrology laboratory, three different stitching systems are under development based on Fizeau sub-aperture measurements. The first one consists of measuring long flat mirrors, the second based on the relative angle determinable stitching interferometry (RADSI) method developed at SPring-8 is aimed primarily at the measurement of short mirrors with strong curvature down to a few meters, and the last, also based on the RADSI method, is dedicated to characterize longer mirrors with intermediate curvature. For each method we will describe the measurement setup and discuss first results obtained. Micro-stitching interferometry is also currently used at the ESRF metrology laboratory. The technique is suitable for measuring deeply curved aspherical profiles and will be illustrated with results from a Kirkpatrick-Baez mirror system for nano-focusing.

1 August 2025 in Review of Scientific Instruments
Verified
Journal Article
Closed access
SASimon G. Alcock
Simon G. Alcock
INIoana-Theodora Nistea
Ioana-Theodora Nistea
MSMurilo Bazan da Silva
Murilo Bazan da Silva
Kawal SawhneyKawal Sawhney
Kawal Sawhney
NNNorman Niewrzella
Norman Niewrzella
FPFrancois Polack
Francois Polack
The surface quality of x-ray mirrors is a major constraint on optical performance at synchrotron light and free electron laser facilities. A limiting factor for creating state-of-the-art optics is the accuracy of metrology data to deterministically guide the polishing tool to correct surface errors. The “MooNpics” (Metrology On One-Nanometer-Precise Optics) collaboration aims to improve optical metrology capabilities at European facilities to enable reproducible measurement of long or curved optics with height errors <1 nm rms and slope errors 100 km); an ellipse with added parabolic arcs; and a strongly curved sphere (R ∼ 9.3 m) with an added spatially varying chirp. This study highlighted calibration issues with several instruments, which were subsequently corrected. In this paper, we present results about the ellipse mirror. Based on metrology data provided by the collaboration, two cycles of ion beam figuring improved all aspects of the mirror, including correcting the ellipse parameters, reducing high- and mid-frequency spatial polishing errors, and refining the shape of the parabolic arcs. Overall, the slope and height errors were improved by a factor of ∼10. We also show how the round-robin measurement exercise helped refine “best practice” procedures for mounting optics, alignment, and data acquisition and analysis methods. It is hoped that this collaborative project will ignite further improvements in the production quality of x-ray optics to benefit many scientific communities around the world.

1 January 2026 in Review of Scientific Instruments
Verified
Journal Article
Open access
TST. Sieg-Letessier
T. Sieg-Letessier
AVA. Vivo
A. Vivo
FPF. Perrin
F. Perrin
JMJ. Marque
J. Marque
MFM. Ferrari
M. Ferrari
RBR. Barrett
R. Barrett
Maintaining optimal x-ray beam quality in accelerator-based light-sources requires mirrors with exceptional shape and surface precision. In practice, mirrors are often mounted in diverse orientations—such as in Kirkpatrick–Baez systems—where gravitational and mechanical effects may differ significantly from upward-facing metrology configurations. In this study, we use optical ray tracing to investigate alternative metrology geometries suitable for measuring side-facing and downward-facing mirrors. We propose a modified profilometry approach for use with the European Synchrotron Radiation Facility long trace profiler, in which beam folding optics are integrated beneath the scanning head to redirect the measurement beam. The approach combines a detailed optical model of the instrument implemented using ray-tracing, enabling accurate evaluation of the impact of motion-induced errors under realistic acquisition conditions. For downward-facing configurations, a promising solution was found experimentally, then characterized, and investigated with an analysis of the impact of alignment tolerance. While preliminary insights are provided for the side-facing setup, all proposed configurations exhibited sensitivity to motion errors of the scanning head, highlighting challenges for robust implementation.