8 July 2023 in Environmental Science and Pollution Research
16 May 2024 in Journal of Lightwave Technology
We present a four-channel polarization-insensitive silicon photonic (SiPh) wavelength division multiplexing (WDM) receiver, incorporating a polarization splitting grating coupler, dual-ring filters and bidirectional photodiodes. This design achieves an ultra-compact footprint of 1 mm × 0.2 mm with a polarization dependent loss (PDL) of 0.58 dB or less. Four clearly open eye diagrams at a data rate of 112 Gb/s PAM4 are obtained. Furthermore, we demonstrate the hybrid integration of the SiPh chip with a 28 nm CMOS transimpedence amplifier (TIA), resulting in an impressive energy efficiency of 1.34 pJ/bit at a data rate of 100 Gb/s PAM4. Sensitivities of −13.4 dBm and -5.6 dBm are achieved at data rates of 50 Gb/s NRZ and 100 Gb/s PAM4, respectively, under KP4 forward error correction (FEC) threshold.
20 September 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a 50-Gb/s optical receiver (ORX) chipset, consisting of a transimpedance amplifier (TIA) and a clock and data recovery (CDR) circuit in a 45-nm silicon-on-insulator CMOS. The proposed inverter-based TIA employs hybrid shunt-series peaking inductors to extend the bandwidth (BW). A baud-rate CDR is proposed to reduce the sampling phases and clocking power by half. To optimise the ORX for in- package integration, a compact-size digital loop is adopted in each channel, and the clock is recovered by phase interpolation from a shared reference. A complete optical-to-electrical (OE) link is built by integrating the proposed ORX with a high-speed Silicon Photonics (SiP) photodetector (PD). Measurements show that the proposed TIA has a transimpedance gain of 53 dB $\Omega $ and a BW of 27 GHz. By integrating it with the SiP PD, the OE front-end (PD+TIA) achieves an input sensitivity of −7.7 dBm at 50 Gb/s and BER $ < 10^{-12}$ . It features a power efficiency of 1.61 pJ/bit at a data rate of 64 Gb/s. The complete 50 Gb/s ORX achieves data recovery at a quarter rate of 12.5 Gb/s with an output jitter of 1.6 psrms, and has a 3.125 GHz clock with phase noise of −115.22 dBc/Hz at an offset frequency of 1 MHz.