The vast majority of physical objects we are dealing with are almost exclusively made of atoms. Because of their discrete level structure, single atoms have proved to be emitters of light, which is incompatible with the classical description of electromagnetic waves. We demonstrate this incompatibility for atomic fluorescence when scaling up the size of the source ensemble, which consists of trapped atomic ions, by several orders of magnitude. The presented measurements of nonclassical statistics on light unconditionally emitted from ensembles containing up to more than a thousand ions promise further scalability to much larger emitter numbers. The methodology can be applied to a broad range of experimental platforms focusing on the bare nonclassical character of single isolated emitters.
16 February 2017 in Measurement Science and Technology
We demonstrated that an iodine stabilized distributed Bragg reflector (DBR) diode based laser system lasing at a wavelength in close proximity to nm could be used as an alternative laser source to the helium-neon lasers in both scientific and industrial metrology. This yields additional advantages besides the optical frequency stability and coherence: inherent traceability, wider optical frequency tuning range, higher output power and high frequency modulation capability. We experimentally investigated the characteristics of the laser source in two major steps: first using a wavelength meter referenced to a frequency comb controlled with a hydrogen maser and then on an interferometric optical bench testbed where we compared the performance of the laser system with that of a traditional frequency stabilized He–Ne laser. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology, especially in conjunction with novel interferometric detection methods exploiting high frequency modulation or multiaxis measurement systems.
A passive optical resonator is a special sensor used for measurement of lengths on the nanometer and sub-nanometer scale. A stabilized optical frequency comb can provide an ultimate reference for measuring the wavelength of a tunable laser locked to the optical resonator. If we lock the repetition and offset frequencies of the comb to a high-grade radiofrequency (RF) oscillator its relative frequency stability is transferred from the RF to the optical frequency domain. Experiments in the field of precise length metrology of low-expansion materials are usually of long-term nature so it is required that the optical frequency comb stay in operation for an extended period of time. The optoelectronic closed-loop systems used for stabilization of combs are usually based on traditional analog electronic circuits processing signals from photodetectors. From an experimental point of view, these setups are very complicated and sensitive to ambient conditions, especially in the optical part, therefore maintaining long-time operation is not easy. The research presented in this paper deals with a novel approach based on digital signal processing and a software-defined radio. We describe digital signal processing algorithms intended for keeping the femtosecond optical comb in a long-time stable operation. This need arose during specialized experiments involving measurements of optical frequencies of tunable continuous-wave lasers. The resulting system is capable of keeping the comb in lock for an extensive period of time (8 days or more) with the relative stability better than 1.6 × 10−11.
Optical fiber links for distribution of highly-stable optical frequencies were experimentally tested by many metrology laboratories in the past fifteen years. But recent development of new optical sensors for industrial application puts demands on a technology transfer of this high-end technology from laboratory experiments to the real industry. The remote calibration of interrogators of Fiber Bragg Grating strain sensory networks is one of important examples. We present a 306 km long optical fiber link established in the Czech Republic where a coherent transfer of stable optical frequency has been firstly demonstrated. The link between ISI CAS Brno and CESNET Prague uses an internet communication fiber where a window 1540 to 1546 nm in DWDM grid is dedicated for the coherent transfer and 1 PPS signal. The optical frequency standard at 1540.5 nm is used for the coherent transfer where compensation of the Doppler shift induced by the optical fiber is done by an acousto-optic modulator driven by a servo loop. The closed loop action is continuously recorded. This enables to compute changes in the transport delay introduced by external influences on the optical line. A comparison with a different measuring method based on analyzing the transport delay of a 1 PPS signal transmitted via the same DWDM window is done. This comparison is a subject of results of the paper.
In scanning probe microscopy laser interferometers are usually used for measuring the position of the probe tip with a metrological traceability. As the most of the AFM setups are designed to work under standard atmospheric conditions the changes of the refractive index of air have an influence to measured values of the length with 1.0exp(-4) relatively. In order to achieve better accuracies the refractive index of air has to be monitored continuously and its instantaneous value has to be used for compensating the lengths measured by all of the interferometric axes. In the presented work we developed a new concept of an electronic unit which is able to monitor the refractive index of air on basis of measurement of ambient atmospheric conditions: temperature, humidity, pressure of the air and the CO2 concentration. The data processing is based on Ciddor equation for calculating the refractive index of air. The important advantage of the unit is a very low power consumption of the electronics so the unit causes only negligible temperature effects to the measured environment. The accuracy of the indirect measuring method employed by the unit was verified. We tested the accuracy in comparison with a direct method of measuring refractive index of air based on an evacuatable cell placed at the measuring arm of a laser interferometer. An experimental setup used for verification is presented together with a set of measurements describing the performance. The resulting accuracy of the electronic unit falls to the 4.1 exp(-7) relatively.