28 February 2020 in ACS Energy Letters
17 May 2016 in Journal of Materials Chemistry A
A composite anode comprising of a 3D network of few-layer MoO 3 nanosheets with an optimum amount of rGO exhibits excellent Na-ion cyclability over wide ranging values of operating current densities. Ultrathin nanosheets of MoO 3 are synthesized by oxidation of MoS2 nanosheets and are tagged with optimum amounts of rGO.
18 April 2019 in The Journal of Physical Chemistry C
28 September 2020 in Advanced Energy Materials
Copper sulfide (CuS) is an attractive electrode material for batteries, thanks to its intrinsic mixed conductivity, ductility and high theoretical specific capacity of 560 mAh g−1. Here, CuS is studied as cathode material in lithium solid‐state batteries with an areal loading of 8.9 mg cm−2 that theoretically corresponds to 4.9 mAh cm−2. The configuration of the cell is LiLi3PS4[CuS (70 wt%) + Li3PS4 (30 wt%)]. No conductive additive is used. CuS undergoes a displacement reaction with lithium, leading to macroscopic phase separation between the discharge products Cu and Li2S. In particular, Cu forms a network of micrometer‐sized, well‐crystallized particles that seems to percolate through the electrode. The formed copper is visible to the naked eye. The initial specific discharge capacity at 0.1 C is 498 mAh g(CuS)−1, i.e., 84% of its theoretical value. The initial Coulomb efficiency (ICE) reaches 95%, which is higher compared to standard carbonate‐based liquid electrolytes for the same cell chemistry (≈70%). After 100 cycles, the specific capacity reaches 310 mAh g(CuS)−1. With the current composition, the cell provides 58.2 Wh kg−1 at a power density of 7 W kg−1, which is superior compared to other transition metal sulfide cathodes.
13 March 2020 in Advanced Functional Materials
Lithium and sodium thiophosphates (and related compounds) have recently attracted attention because of their potential use as solid electrolytes in solid‐state batteries. These compounds, however, exhibit only limited stability in practice as they react with the electrodes. The decomposition products partially remain redox active hence leading to excess capacity. The redox activity of thiophosphates is explicitly used to act as electrode for sodium‐ion batteries. Copper thiophosphate (Cu3PS4) is used as a model system. The storage behavior between 0.01 and 2.5 V versus Na+/Na is studied in half cells using different electrolytes with 1 m NaPF6 in diglyme showing the best result. Cu3PS4 shows highly reversible charge storage with capacities of about 580 mAh g−1 for more than 200 cycles @120 mA g−1 and about 450 mAh g−1 for 1400 cycles @1 A g−1. The redox behavior is studied by operando X‐ray diffraction and X‐ray photoelectron spectroscopy. During initial sodiation, Cu3PS4 undergoes a conversion reaction including the formation of Cu and Na2S. During cycling, the redox activity seems dominated by sulfur. Interestingly, the capacity of Cu3PS4 for lithium storage is smaller, leading to about 170 mAh g−1 after 200 cycles. The results demonstrate that thiophosphates can lead to reversible charge storage over several hundred cycles without any notable capacity decay.
10 September 2020 in Batteries & Supercaps
The limited Na‐storage capacity of graphite anodes for sodium‐ion batteries (∼110 mAh g−1) is significantly enhanced by the incorporation of nanosized Sn (17 wt%). The composite (SntGraphite), prepared by simple annealing of graphite with SnCl2, shows a specific capacity of 223 mAh g−1 (at 50 mA g−1) combined with excellent cycle life (i. e., 96 % of capacity retention after 2,200 cycles at 1 A g−1) and initial Coulomb efficiency (90 %). The combined storage of sodium in graphite (by solvent co‐intercalation) and Sn (by alloy formation) is followed by in situ X‐ray diffraction and in situ electrochemical dilatometry (ECD). While the additional tin almost doubles the electrode capacity, its contribution to the electrode expansion (∼3 %) is surprisingly small. The use of SntGraphite as anode for sodium‐ion hybrid capacitors with activated carbon as cathode provides a maximum energy and power density of ∼93 Wh kg−1 and 7.8 kW kg−1, with a capacity retention of ∼80 % after 8,000 cycles.