High-temperature heat pumps are a key technology for enabling the complete integration of renewables into the power grid. Although these systems may come with several variants, Brayton heat pumps are gaining more and more interest because of the higher heat sink temperatures and the potential to leverage already existing components in the industry. Because these systems utilize renewable electricity to supply high-temperature heat, they are particularly suited for industry or energy storage applications, thus prompting the development of various demonstration plants to evaluate their performance and flexibility. Adapting to varying load conditions and swiftly responding to load adjustments represent crucial aspects for advancing such systems. In this context, this study delves into assessing the transient capabilities of Brayton heat pumps during thermal load management. A transient model of an emerging prototype is presented, comprising thermal and volume dynamics of the components. Furthermore, two reference scenarios are examined to assess the transient performance of the system, namely a thermal load alteration due to an abrupt change in the desired heat sink temperature and, secondly, to a sudden variation in the sink mass flow rate. Finally, two control methodologies—motor/compressor speed variation and fluid inventory control—are analyzed in the latter scenario, and a comparative analysis of their effectiveness is discussed. Results indicate that varying the compressor speed allows for a response time in the 8–20 min range for heat sink temperature regulation (first scenario). However, the regulation time is conditioned by the maximum thermal stress sustained by the heat exchangers. In the latter scenario, regulating the compressor speed shows a faster response time than the inventory control (2–5 min vs. 15 min). However, the inventory approach provides higher COPs in part-load conditions and better stability during the transient phase.
High-temperature heat pumps (HTHPs) are becoming increasingly relevant in the industry as they represent a promising solution for decarbonizing industrial heat. These technologies can enable the electrification of industrial processes by exploiting electricity from renewables to provide process heat at temperatures above 250 °C, as in the case of emerging Brayton-based HTHPs. To succeed in this purpose, HTHPs must also ensure operational flexibility, which entails the ability to operate safely under varying loads and promptly respond to fluctuations in demand, while maintaining high efficiencies. Moreover, the ability to provide large flexible electric loads to transmission system operators has the potential to unlock innovative business cases and further promote the use of these systems. Common control strategies for achieving this include employing bypass mechanisms, fluid inventory control, and adjusting turbomachinery rotational speeds. Despite their variety, the simultaneous use of such control strategies is often limited as they may lead to significantly different system behaviors, both in terms of transient and steady performance. In this paper, rotational speed and fluid inventory control are examined from a transient perspective to maintain the desired sink temperature while regulating the thermal load of a novel Brayton-based HTHP. A comprehensive dynamic model of the system is proposed and leveraged to numerically test the two control approaches, aiming to provide insights for forthcoming experimental investigation. Results indicate that rotational speed control leads to negligible sink temperature residuals, while fluid inventory control better preserves the HTHP performances for varying temperature glides.