Rechargeable magnesium batteries are promising for future energy storage. However, among other challenges, their practical application is hindered by low coulombic efficiencies of magnesium plating and stripping. Fundamental processes such as the formation, structure, and stability of passivation layers and the influence of different electrolyte components on them are still not fully understood. In this work, we gain unique insights into the initial Mg plating and stripping cycles by comparing magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI) 2 )‐ and magnesium tetrakis(hexafluoroisopropyloxy)borate (Mg[B(hfip) 4 ] 2 )‐based electrolytes, each with and without MgCl 2 , on gold electrodes by highly sensitive operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM−D) applying hydrodynamic spectroscopy. With the stable Mg[B(hfip) 4 ] 2 ‐based electrolytes, highly efficient and interphase‐free cycling is possible and passivation layers are attributed to electrolyte contaminants. These are forming and degrading during the so‐called initial conditioning process. With the more reactive Mg(TFSI) 2 ‐based electrolyte, thick passivation layers with small pores are growing during cycling. We demonstrate that the addition of chloride lowers the amount of passivated Mg deposits in these electrolytes and accelerates the currentless dissolution of the passivation layer. This has a positive effect since we observe the most efficient cycling and uniform deposition when no interphase is present on the electrode.
1 April 2023 in Journal of the Electrochemical Society
Ethylene carbonate (EC) is the archetype solvent in Li-ion batteries. Still, questions remain regarding the numerous possible reaction pathways of EC. Although the reaction pathway involving direct EC reduction and SEI formation is most commonly discussed, EC ring-opening is often observed, but seldomly addressed, especially with respect to SEI formation. By applying Online Electrochemical Mass Spectrometry, the EC ring-opening reaction on carbon is found to start already at ∼2.5 V vs Li+/Li as initiated by oxygenic carbon surface groups. Later, OH− generated from H2O reduction reaction at ∼1.6 V further propagates EC to ring-open. The EC reduction reaction occurs <0.9 V but is suppressed depending on the extent of EC ring-opening at higher potentials. Electrode/electrolyte impurities and handling conditions are found to have a significant influence on both processes. In conclusion, SEI formation is shown to be governed by several kinetically competing reaction pathways whereby EC ring-opening can play a significant role.
Aqueous lithium‐ion batteries (ALIBs) are promising for large‐scale energy storage systems because of the cost‐effective, intrinsically safe, and environmentally friendly properties of aqueous electrolytes. Practical application is however impeded by interfacial side‐reactions and the narrow electrochemical stability window (ESW) of aqueous electrolytes. Even though higher electrolyte salt concentrations (e.g., water‐in‐salt electrolyte) enhance performance by widening the ESW, the nature and extent of side‐reaction processes are debated and more fundamental understanding thereof is needed. Herein, the interfacial chemistry of one of the most popular electrode materials, V2O5, for aqueous batteries is systematically explored by a unique set of operando analytical techniques. By monitoring electrode/electrolyte interphase deposition, electrolyte pH, and gas evolution, the highly dynamic formation/dissolution of V2O5/V2O4, Li2CO3 and LiF during dis‐/charge is demonstrated and shown to be coupled with electrolyte decomposition and conductive carbon oxidation, regardless of electrolyte salt concentration. The study provides deeper understanding of interfacial chemistry of active materials under variable proton activity in aqueous electrolytes, hence guiding the design of more effective electrode/electrolyte interfaces for ALIBs and beyond.
Rechargeable magnesium batteries could provide future energy storage systems with high energy density. One remaining challenge is the development of electrolytes compatible with the negative Mg electrode, enabling uniform plating and stripping with high Coulombic efficiencies. Often improvements are hindered by a lack of fundamental understanding of processes occurring during cycling, as well as the existence and structure of a formed interphase layer at the electrode/electrolyte interface. Here, a magnesium model electrolyte based on magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2) and MgCl2 with a borohydride as additive, dissolved in dimethoxyethane (DME), was used to investigate the initial galvanostatic plating and stripping cycles operando using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM‐D). We show that side reactions lead to the formation of an interphase of irreversibly deposited Mg during the initial cycles. EQCM‐D based hydrodynamic spectroscopy reveals the growth of a porous layer during Mg stripping. After the first cycles, the interphase layer is in a dynamic equilibrium between the formation of the layer and its dissolution, resulting in a stable thickness upon further cycling. This study provides operando information of the interphase formation, its changes during cycling and the dynamic behavior, helping to rationally develop future electrolytes and electrode/electrolyte interfaces and interphases.
Wieder aufladbare Magnesium Batterien sind vielversprechend für die zukünftige Energiespeicherung. Ihre praktische Anwendung wird jedoch unter anderem durch niedrige Coulomb'sche Effizienzen bei der Magnesiumabscheidung und ‐auflösung behindert. Grundlegende Prozesse wie die Bildung, Struktur und Stabilität von Passivierungsschichten und der Einfluss verschiedener Elektrolytbestandteile auf diese sind immer noch nicht vollständig verstanden. In dieser Studie erhalten wir einzigartige Einblicke in die ersten Magnesiumabscheidungs‐ und auflösungszyklen, indem wir Magnesium bis(trifluoromethansulfonyl)imid (Mg(TFSI)2)‐ und Magnesium tetrakis(hexafluoroisopropyloxy)borat (Mg[B(hfip)4]2)‐basierte Elektrolyte, jeweils mit und ohne MgCl2, operando auf Goldelektroden mittels hochempfindlicher elektrochemischer Quarzmikrowaage mit Dissipationsmessung (EQCM−D) unter Anwendung hydrodynamischer Spektroskopie vergleichen. Mit den stabilen Mg[B(hfip)4]2‐basierten Elektrolyten ist hocheffizientes und Interphasen‐freies Zyklieren möglich, während die Bildung von Passivierungsschichten Elektrolytverunreinigungen zugerechnet werden kann. Diese bilden sich und degradieren während des sogenannten Konditionierungsprozesses. Mit dem reaktiveren Mg(TFSI)2‐basierten Elektrolyten wachsen während des Zyklierens dicke Passivierungsschichten mit kleinen Poren. Wir zeigen, dass die Zugabe von MgCl2 bei diesen Elektrolyten die Menge an passiviertem Mg verringert und die stromlose Auflösung der Passivierungsschicht beschleunigt. Dies hat einen positiven Effekt, da wir das effizienteste Zyklieren und die gleichmäßigste Abscheidung beobachten, wenn sich keine Interphase auf der Elektrode befindet.