AuCu phase had a significant effect on the bonding strength of Au80Sn20 alloy and Cu substrate. The formation of the AuCu(200)/Cu(200) interface significantly improves the shear strength of solder joints. Therefore, it is particularly important to analyze the strengthening mechanism of the AuCu phase in the Cu matrix. The atomic structure, interfacial stability, and interfacial bonding properties of the Cu(200)/AuCu(200) interface were investigated using first-principle calculation. The layer spacing convergence results show that seven layers of Cu(200) surface and seven layers of AuCu(200) surface are enough thick to be chosen for the interface model. The calculation shows that the surface energies are 1.463 J/m2 and 1.081 J/m2 for AuCu(200) surface and Cu(200) surface, respectively. Four interface combinations of Top sit, Long bridge, Short bridge, and Hollow were investigated by considering four stacking methods of AuCu(200). It is shown that the interfacial configuration of the Long bridge is the most stable and favorable structure, which has the largest adhesion work, the smallest interfacial energy, and the smallest interfacial spacing. The density of states and electron difference density were calculated for the four interfacial configurations, and the results showed that the main bonding mode of the Long bridge interface is composed of both Cu-Cu covalent bonds and Au-Cu covalent bonds.
This study investigated the efficiency of biochar in eliminating Cd(II) and Pb(II) ions from slurries generated from construction-derived waste materials. The construction waste slurry samples consisted of genuinely contaminated sludge sediments. To improve the adsorption capacity of biochar for metal ions, coconut shell-derived biochar was subjected to hydrochloric acid treatment. The modified biochar demonstrated an improved porous structure and showed a higher concentration of oxygen-containing functional groups compared to the untreated biochar. After a 48 h contact with the contaminated slurry, the treated biochar attained removal efficiencies of 21.15% for Cd(II) and 19.43% for Pb(II). The kinetic study of the adsorption process conformed to a pseudo-second-order model. Density functional theory (DFT) computations clarified the adsorption mechanism of Cd(II) and Pb(II) by carboxyl (-COOH) and hydroxyl (-OH) functional groups. The findings demonstrated that functional groups contribute lone-pair electrons for the adsorption of heavy metal ions. The carboxyl (-COOH) functional group exhibited a greater affinity for binding Cd(II) and Pb(II) ions than the hydroxyl (-OH) group, which explains the improved adsorption efficiency seen in biochar treated with hydrochloric acid. These findings offer theoretical validation for the use of hydrochloric acid-modified biochar as an efficient adsorbent for the remediation of sludge contaminated with Cd(II) and Pb(II).
24 November 2010 in Journal of Phase Equilibria and Diffusion