3 February 2023 in Journal of Alloys and Compounds
16 September 2015 in Metallography, Microstructure, and Analysis
31 August 2020 in Metals and Materials International
12 November 2015 in Metallography, Microstructure, and Analysis
1 November 2019 in Materials Express
The microstructure and mechanical properties of Mg–2Zn–0.5Ca–1.0Mn alloy under different treatments were investigated. Nano-TiO2 with biological activity was added to the self-optimized silicate electrolyte in order to enhance the corrosion resistance and the activity of micro-arc oxidation (MAO) coatings formed in the aged bio-magnesium alloy silicate electrolyte. Results show that the tensile strength and micro-hardness of solution treatment alloy were 194 MPa and 40.55 HV, respectively, which were increased by 11% and 30% comparing with as-cast alloy. Subsequently, the experimental alloy was aged at 175 °C from 0.5 h to 36 h, the tensile strength of the alloy reached 229 MPa when the alloy was aged to 16 h, which was 55 MPa higher than the as-cast alloy. Besides, the fracture mechanism transformed from the cleavage fracture to quasi-cleavage fracture after heat treatment. Different content of modified nano-TiO2 (1, 3 and 5 g/L) is added into based silicate electrolyte has been utilized to modify the bio-magnesium coatings for precoated metals. The sealing processes on MAO coatings surface effectively improve the corrosion resistance property of the bio-magnesium alloy. As the concentration of nano-TiO2 increases from 0 g/L to 5 g/L, the corrosion potential of MAO ceramic film increases gradually. When the concentration of nano-TiO2 is 5 g/L, the corrosion potential of the formed ceramic film is the highest, reaching – 1.3601 V, this shows that the ceramic membrane has good corrosion resistance.
22 December 2015 in Journal of Materials Engineering and Performance