8 May 2023 in IEEE Transactions on Electron Devices
We developed analytical compact models of parasitic resistance and capacitance (RC) for nanosheet field-effect transistors (NSFETs) with metal contact structures. The proposed model accurately captures the number of sheets, sheet geometry, gate, source, drain, and contact sizes. The parasitic resistance model generated in each region was modeled using the transmission line method (TLM) and the spread resistance model. The parasitic capacitance model was modeled using the conformal mapping method based on the distribution of the electric field. The developed models were validated by changing the structural parameters. The proposed models were implemented in Berkeley short-channel IGFET model (BSIM)-common multi-gate (CMG) to enable circuit performance prediction. With our proposed model, we can accurately predict the circuit performance of NSFETs, capturing the recent scaling trends and process variations in the proposed NSFET.
24 January 2022 in Flexible and Printed Electronics
Printed devices fabricated using roll-to-roll (R2R) printing technology have been used in low-cost Internet of Things (IoTs), smart packaging and bio-chips. As the area of applications of printed devices broadens, arithmetic units in digital design need to be implemented. In this paper, we propose a stable 4-bit arithmetic logic unit (ALU) design using a minimum number of transistors that can overcome the limitations of printed devices. We propose the use of a 2:1 transmission gate (TG) multiplexer structure and hybrid 16T full-adder to construct the ALU. New design methods are applied to reduce the number of inverter stages added to overcome the voltage degradation. Using this approach reduces the total number of transistors used in the design from 276 to 153, compared to the conventional design, with significant improvements in delay and power performance.
30 September 2024 in IEEE Journal of the Electron Devices Society
In this paper, we propose a process-aware analytical gate resistance model for nanosheet field-effect transistors (NSFETs). The proposed NSFET gate resistance is modeled by applying the distributed resistance coefficient, which can be used when current flows vertically and horizontally. By predicting the direction of current flow, the resistance components are approximated in series with parallel connection of divided segments. The proposed model can reflect changes in structural parameters, making it possible to predict the scaling trend of NSFETs. This is validated through TCAD simulation results. The proposed model can be implemented in general compact models such as the Berkeley short channel IGFET model (BSIM)-common multi-gate (CMG) and can be used to predict circuit performance more accurately.