5 October 2021 in IEEE Microwave and Wireless Components Letters
This letter presents the implementation of an integrated bias circuit for controlling the heating and cooling of a phase-change material (PCM) switch. By integrating a parallel bias capacitance to ground on the heater circuit, we show that the proposed design reduces the influence of bias probes on the switch response. The measured insertion loss is less than 1 dB up to 28 GHz, and we experimentally show that this switch circuit improves isolation by more than 8.5 dB, as expected from simulations.
7 April 2011 in IEEE Microwave and Wireless Components Letters
This paper presents a 14 GHz high-Q (quality factor) tunable resonator using microelectromechanical system (MEMS) varactors. A brass surface mountable cavity has been bonded on a fused silica wafer on which are processed three 1.1 mm long MEMS varactors. Their location has been optimized in order to obtain a wide frequency shift, when the cantilevers are actuated on the substrate. 15% tuning range from 11.9 GHz to 14.2 GHz has been obtained with a continuous shift from 11.9 GHz to 13.6 GHz. Measurements result in an average unloaded quality factor (Qu) of 480 over the operating frequency band.
31 January 2017 in IEEE Antennas and Wireless Propagation Letters
A compact Planar Inverted F-Antenna (PIFA) has been designed, fabricated and characterized to work either for receive or transmit applications. The antenna center frequency can be tuned from 1.52 GHz up to 2.25 GHz, using switched auxiliary strips. Ohmic contact RF-MEMS switches are used to connect and disconnect the auxiliary strips, maintaining both efficiency and antenna linearity (power handling capability). The measured PIFA efficiency for all states in an anechoic chamber is between 52% up to 95%. The antenna linearity has also been measured using an Adjacent Channel Power Ratio (ACPR) test bench, showing 42 dB dynamic range up to 28 dBm input power.
12 November 2019 in Journal of Microelectromechanical Systems
1 June 2010 in Journal of Micromechanics and Microengineering