In recent years, reinforced composites from biodegradable and natural fibers have a worldwide scope for advanced applications. However, the core limitation of natural fiber reinforced composites are poor consistency among supporting fibers and the matrix. Therefore, optimal structural performance of fibers and matrix is desirable. In this study, chemical treatments (i.e., alkali pretreatment, acid pretreatment, and scouring) were applied to jute fibers for improvement of composite properties. Thermal, thermo-mechanical, and flexural properties, and surface morphology, of untreated and treated jute fibers were studied on the treated fibers. Jute fiber/epoxy composite properties were analyzed by thermogravimetric analysis (TGA), flexural strength and modulus, and dynamic mechanical analysis (DMA). The chemical treatments had a significant impact on the properties of jute fiber composites.
Polymer‐induced liquid precursors are hydrated, metastable, amorphous droplets rich in insoluble ionic compounds; they form in aqueous solutions that are supersaturated with mineral ions in the presence of charged polymers that delay the onset of crystal nucleation. This work reports that rapid crystallization of the carbonate salts of calcium, barium, and strontium can be triggered by adding polycations to polyanion‐stabilized precursor solutions that would otherwise be stably amorphous for over ten days. In complex coacervate systems, entropic gains drive the competitive displacement of small (e.g.) cationic species from anionic binding partners by larger molecules with more positive charges. We build evidence that the constituents of the stabilized mineral salt are displaced from the stabilizing polyanion by the added polycation in a similar manner. By exposing liquid precursor solutions to arrays of polycationic hydrogels, we demonstrate the ability to deposit crystals in a site‐selective manner, enabling spatial control over mineral formation.