30 September 2021 in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
The article proposes a method for dynamic signature identification based on a spiking neural network. Three dynamic signature parameters l(t), xy(t), p(t) are used, which are invariant to the signature slope angle, and after their normalization, also to the signature spatial and temporal scales. These dynamic parameters are fed to the spiking neural network for recognition simultaneously in the form of time series without preliminary transformation into a vector of static features, which, on the one hand, simplifies the method due to the absence of complex computational transformation procedures, and on the other hand, prevents the loss of useful information, and therefore increases the accuracy and reliability of signature identification and recognition (especially when recognizing forged signatures that are highly correlated with the genuine). The spiking neural network used has a simple training procedure, and not all neurons of the network are trained, but only the output ones. If it is necessary to add new signatures, it is not necessary to retrain the entire network as a whole, but it is enough to add several output neurons and learn only their connections. In the results of experimental studies of the software implementation of the proposed system, it’s EER = 3.9% was found when identifying skilled forgeries and EER = 0.17% when identifying random forgeries.
30 September 2023 in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
The article aims to study the multi-level segmentation process of images of arbitrary configuration and placement based on features of spatial connectivity. Existing image processing algorithms are analyzed, and their advantages and disadvantages are determined. A method of organizing the process of segmentation of multi-gradation halftone images is developed and an algorithm of actions according to the described method is given.
20 December 2023 in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
This article describes the problem of automatic regulation of reactive power using electronic devices FACTS (Flexible AC Transmission Systems): static synchronous compensator (STATCOM) and unified power flow controller (UPFC). With the help of a complex writing form, the following are determined: voltages at the installation nodes of the FACTS device and loads, currents of loads, power sources and electronic compensators in case of voltage instability at the load node of the electrical network. Voltages and currents are determined using the node-voltage method. The task of STATCOM is partial or full compensation of reactive power. During the reduction of the voltage at the load node, the reactive power generated by the power source decreases. The STATCOM should partially or fully compensate for the reactive power imbalance as quickly as possible. However, at the same time, it is not possible to fully compensate for the voltage reduction. A series-parallel or parallel-series UPFC can be used to solve this problem. As a result of using the UPFC, it is possible to automatically raise the voltage level to acceptable values with the help of the UPFC series compensator. The analysis shows that the parallel-serial UPFC is characterized by the stability of operation. In the case of using a series-parallel UPFC, there are restrictions on the ability to adjust the imaginary voltage component of the series compensator, since the angle of the voltage vector changes, which causes a failure in the operation of the regulator of the parallel compensator UPFC. W artykule opisano problematykę automatycznej regulacji mocy biernej za pomocą urządzeń elektronicznych FACTS (Flexible AC Transmission Systems): statycznego kompensatora synchronicznego (STATCOM) oraz regulatora przepływu mocy (UPFC). Za pomocą złożonego formularza rejestracyjnego określane są: napięcia w węzłach instalacji urządzenia FACTS i obciążenia, prądy obciążenia, źródeł zasilania i kompensatorów elektronicznych w przypadku niestabilności napięcia w węźle obciążenia sieci elektrycznej. Napięcia i prądy są wyznaczane metodą napięć węzłowych. Zadaniem STATCOM jest częściowa lub pełna kompensacja mocy biernej. Podczas spadku napięcia w węźle obciążenia, moc bierna generowana przez źródło zasilania maleje. STATCOM powinien częściowo lub w pełni skompensować nierównowagę mocy biernej tak szybko, jak to możliwe. Jednocześnie jednak nie jest możliwe pełne skompensowanie spadku napięcia. W celu rozwiązania tego problemu można zastosować szeregowo-równoległy lub równoległo-szeregowy układ UPFC. W wyniku zastosowania UPFC możliwe jest automatyczne podniesienie poziomu napięcia do akceptowalnych wartości za pomocą kompensatora szeregowego UPFC. Analiza pokazuje, że równoległo-szeregowy UPFC charakteryzuje się stabilnością działania. W przypadku zastosowania szeregowo-równoległego UPFC istnieją ograniczenia w zakresie możliwości regulacji składowej urojonej napięcia kompensatora szeregowego, ponieważ zmienia się kąt wektora napięcia, co powoduje awarię działania regulatora kompensatora równoległego UPFC.
15 October 2025 in TECHNICAL SCIENCES AND TECHNOLOGIES
The medical analysis of ECG is based on visual examination by cardiologists, which is a subjective and labor-intensive process and includes the factor of human error. With the advent of analysis based on artificial intelligence systems or algorithmic data processing, systems for classifying cardiogram data have emerged. A properly pre-processed signal is a very important component in the use of neural networks for such tasks. The analysis of studies and publications has shown that these methods have not been used for spiking neural networks based on reservoirs due to their non-standardized form, which makes training spiking neural networks more difficult and reduces the final accuracy metrics. The purpose of the article is to develop and provide a detailed description of a method for transforming ECG signals from the MIT-BIH database into standardized data arrays with values in [0,1] without losing the useful signal payload, as well as to present intermediate results from studies of individual components of the proposed method. Based on mathematical approaches to sequence processing, the work presents a new method for preliminary ECG signal processing for its further use in classification tasks. The sequence of performing such operations as signal resampling and retiming, its normalization, and additional operations necessary for complete processing is described. The method has been tested, and positive modeling results are presented in the form of a signal that characterizes a heartbeat with preserved P and T waves and QRS complex, but with amplitude adjusted to [0,1] and a standard signal length throughout one record. The proposed signal processing approach, with its comprehensive processing that consists of combining known processing methods into the following sequence (resampling, interpolation, min-max normalization) and integrating it into the processing pipeline of a spiking neural network, represents an innovative contribution to biomedical informatics, where accuracy and efficiency are key to transitioning from laboratory models to real medical systems.
26 June 2025 in Таврійський науковий вісник. Серія: Технічні науки
У статті досліджено потенціал застосування нейромережевих технологій для індивідуалізованого вивчення мов із обмеженою кількістю носіїв. Особливу увагу зосереджено на івриті як прикладі мови, що поєднує високий рівень граматичної складності, специфічну писемність та обмежену доступність навчальних ресурсів за межами Ізраїлю. Серед особливостей мови виділено відсутність голосних літер у стандартному письмі, використання системи діакритичних знаків – некудот, які застосовуються лише у вибіркових контекстах (ктів менукад), та переважання письма без цих знаків – ктів мале. Також акцент зроблено на незвичному для більшості світових мов напрямку письма справа наліво, характерному для семітської мовної групи.На основі огляду сучасних рішень у сфері штучного інтелекту показано, як адаптивні системи (зокрема, інтервальне повторення, діалогові агенти та ситуативне моделювання) можуть ефективно реагувати на потреби мовного навчання. Проаналізовано приклади Duolingo, Tactical Language and Culture Training System (TLCTS) та ChatGPT, які демонструють різні стратегії персоналізації взаємодії з користувачем. Окремий розділ присвячено наявним нейромережевим моделям для івриту, зокрема AlephBERT – трансформерній моделі, адаптованій до морфології івриту, а також експериментальним системам, що імітують типові помилки студентів. Додатково представлено приклади нейромережевих рішень для інших малопоширених мов – баскської (Latxa), ірландської (gaBERT), кельтських та кримськотатарської (на основі платформи Common Voice).У підсумку обґрунтовано доцільність розвитку міждисциплінарних підходів за участі фахівців із лінгвістики, педагогіки та комп’ютерних наук з метою створення адаптивних, доступних і масштабованих платформ для вивчення мов із недостатньою цифровою підтримкою.
17 June 2026 in Optoelectronic Information-Power Technologies
The article conducts a comprehensive study of the problem of automating customer communication in modern e-commerce systems. It is determined that existing scenario-based approaches to building chatbots have exhausted their potential given the growing demands for personalization and speed of service. A new information technology for creating an intelligent consultant bot is proposed, based on a hybrid combination of Large Language Models (LLM) of the Transformer architecture and RAG (Retrieval-Augmented Generation) methodology. This approach enables natural response generation using up-to-date product data stored in a relational database. The shortcomings of existing commercial solutions are analyzed in detail, and the advantages of the developed system are formulated