Rafi M. Qasim

Rafi M. Qasim

Auto-generated profile, based on publicly available information

Rafi M. Qasim

Southern Technical University

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2022 in U.Porto Journal of Engineering
Verified
Journal Article
Open access
PDF file
TJTahseen Jabbar
Tahseen Jabbar
RQRafi M. Qasim
Rafi M. Qasim
BMBassam A. Mohammed
Bassam A. Mohammed
This paper intends to numerically analyze the hydrodynamic characteristics of the flow pattern that surrounds the circular pier near the vane angle. These include flow velocity, turbulent intensity, and pressure. A computational fluid dynamic is proposed to simulate the two-dimensional model by using the finite volume method, while the k - ε turbulence model is used to describe the turbulent model. The vane is located upstream of the pier, with its dimensions as function of the pier diameter. The distance between the vane and the pier center is equal to the pier diameter, the angle of the vane is put with a range from 60o to 180o, and the pier diameter is equal to 10 mm. The turbulent flow has a Reynolds number that varies from 20000 to 50000. The existence of the vane angle leads to two different processes, which are flow separation and flow dissipation, which have a direct effect on flow velocity, turbulent intensity, and pressure. From the current numerical results, the relationships between Reynolds number and average flow velocity, maximum flow velocity, turbulent intensity, and maximum turbulent intensity are more sensitive to flow separation and flow dissipation along the vane. Also, positive and negative pressure distributions have a higher influence on flow separation and flow dissipation.

30 November 2023 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
RQRafi M. Qasim
Rafi M. Qasim
IAIhsan A. Abdulhussein
Ihsan A. Abdulhussein
MHMuna A. Hameed
Muna A. Hameed
The purpose of the present study is to examine the influence of baffles presence at downstream system on weir gate hydraulic response. Two baffles configuration (triangle and angle shapes) are installed in bed flume. Two different spacing are used between the baffles and two different directions for baffles are also adopted. The study tries to investigate the variation in upstream Froude number, downstream Froude number, Reynolds number, actual discharge, discharge coefficient, downstream average water depth and the hydraulic system efficiency which is expressed as function of downstream water depth. It has been shown that the number of baffles has a direct and significant impact on flow hydraulic characteristics of weir-gate structure regardless of the spacing between baffles and the direction of baffles related to flow. Baffles number and spacing have essential impact on the water flow velocity of system and this impact leads to increase the flow resistance. The results clarify that the upstream Froude number, downstream Froude number, Reynolds number, actual discharge and discharge coefficient are decreased with the increase in baffles number except the average downstream water depth which increases with increase in baffles number. The efficiency of hydraulic system gives a good indicator for using baffles with weir-gate structure. At the end this paper shows a fruitful result of efficiency. This experiment run condense on the baffle’s numbers and directions with respect to the water flow direction at the downstream regime. So, the rises in the water level relies on the numbers and directions of the baffles as compare to the case without using baffles at the flume downstream region. The actual discharge and weir-gate discharge coefficient are more sensitive to the increase in the baffles’ numbers and the baffles direction with respect to the water flow direction

25 May 2023 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
AAAmjed Ahmed Ali
Amjed Ahmed Ali
AMAkeel MA Morad
Akeel MA Morad
RQRafi M. Qasim
Rafi M. Qasim
The study presented three-dimensional (3D) analysis of water's upward flowing through the vertical pipe under turbulent characteristic considerations. Both numerical constructed and improved the model of 3D for cylindrical coordinates of governing equations for incompressible turbulent flow with the Reynolds Average Navier-Stokes (RANS) model using the improved constants of the (k–ε) type. The present model is then compared with a previous study to give the feasibility of the present single-phase turbulent flow parameters. The pipe length is tested to measure how much it affected the turbulent parameters though one of the expected factors is the turbulent time scale. On the other hand, the model is numerically examined to determine the velocity profile, shear rate, and surface deformation of the water domain. While the pressure distribution, turbulent kinetic energy, and turbulent dissipation rate, these parameters are classified as the mechanic's system factors. The simulation is done with wide software used to simulate industrial is COMSOL 5.4 Multiphysics software. The results obtained increased the velocity of three inlet water velocities used ranging from (0.087, 0.105, and 0.123 m/sec) of upward flow. High fluctuation in the water flow moves along the entire pipe length and it can notice the sensitivity to any change in water properties or mechanical properties. The liquid upward flow in turbulent conditions is suffered from many characteristics such them related to liquid properties and others related to the mechanics of the application through the systems. The interaction between the fluid film (fluid boarded the pipe inner diameter) has been observed by the shear rate and liquid surface deformation

28 June 2024 in International Journal for Computational Civil and Structural Engineering
Verified
Journal Article
Open access
RQRafi M. Qasim
Rafi M. Qasim
IAIhsan A. Abdulhussein
Ihsan A. Abdulhussein
MHMuna A. Hameed
Muna A. Hameed
A composite hydraulic structure is used to solve the problems of sediment and floating materials, respectively. A pier (obstacle) is used at the downstream of the composite hydraulic structure to increase water depth, decrease flow velocity, and dissipate the flow energy. The paper deals with the effect of single pier and double piers on the hydraulic characteristics of the composite structure. Circular and square shapes are adopted in the study with different spacing measured from the downstream of the composite structure. The experiments reveal how the level of the hydraulic characteristics is changed due to the existence of the pier/piers as compared to without the existence of the pier/piers. The statistical data which is collected from the experiments shows the alteration in the average downstream water depth, discharge coefficient, Reynolds number, upstream Froude number and downstream Froude number regardless of pier shape and spacing. The alteration happens owing to a change in the separation zone of water flow along the pier circumference. Nonlinear water surface profile is appeared when the pier is located at the downstream, while linear water surface profile is appeared clearly when the downstream without pier. Also the interference between overflow velocity and underflow velocity will be reflected in the hydraulic characteristics.

1 January 2026 in Modelling and Simulation in Engineering
Verified
Journal Article
Open access
RQRafi M. Qasim
Rafi M. Qasim
ADAmmar Dawood
Ammar Dawood
SFSafaa Hameed Faisal
Safaa Hameed Faisal
The combined weir‐gate systems are commonly used in water resources projects, but their hydraulic responses become significantly more complicated in the presence of downstream obstacles such as dikes, and the statistically based treatment of their hydraulics has received little attention. In the present study, the hydraulic and statistical characteristics of a rectangular combined weir‐gate system with a single L‐shaped super dike downstream are experimentally investigated under four different operating conditions. The experiments were conducted in a rectangular laboratory flume of 200 × 15 × 7.5 cm using 5 mm‐thick beveled wooden structures, and 27 experiments were performed for each case by changing the pump discharge. The measured parameters were the actual discharge, downstream water depth, and water depth above the weir. The hydraulic investigation includes downstream velocity, specific energy, discharge coefficient, Froude number, and Reynolds number. The results were statistically treated using (a) descriptive statistics to provide a general overview of the seven variables, (b) the Pearson correlation coefficient to analyze the relationships between the different variables and to inspect the existence of multicollinearity, and (c) multiple linear regression (MLR) modeling of the discharge to predict its values using different variables, which was validated using R 2 , adjusted R 2 , F ‐statistics, p values, and residual scatter plots. Furthermore, the application of probability distribution functions (normal, Poisson, and binomial) to the measured data was investigated for each case. The MLR models performed very well, with R 2 values ranging from 98.77% to 99.52%, and hence may be adopted for discharge prediction of the studied structure. Compared to the classical theoretical equations, the proposed MLR models produced significantly better results. The downstream velocity and the average downstream water depth were found to be the most important variables. The mean values of the discharge and discharge coefficient ranged from 0.000905 to 0.001102 m 3 /s and 0.733 to 0.886, respectively. It was found that the measured discharges followed the normal distribution for Cases 1–4, a Poisson‐like pattern for Case 2, and a binomial‐like pattern for Case 3. The results provide statistically based and empirically based relations for the discharge prediction of combined hydraulic structures.