12 October 2016 in IEEE Transactions on Power Systems
In this paper, a novel concept of Generalized Δ-circuit is proposed, that enables integration of distributed generators (DGs) based on contemporary technologies into the short-circuit calculations of large-scale distribution systems. Modern DG models, such as doubly fed induction generators (DFIGs) and three-phase inverter based DGs (IBDGs) differ from the classical synchronous and induction generator models. It is shown that their models cannot be integrated in traditional short-circuit calculation procedures because they include a large number of possible fault current control strategies. Therefore, the concept of Generalized Δ-circuit is proposed and allows for any control strategy implemented in modern DGs to be integrated in the short-circuit calculation procedure. An improved backward/forward sweep procedure is developed for calculation of the Generalized Δ-circuit state. The faulted system state is calculated by the superposition of the known prefault state and calculated Generalized Δ-circuit state. Results show that unlike previously developed online short-circuit calculations, the proposed method can handle DFIGs and IBDGs with arbitrary selected fault current control strategies.
21 August 2017 in IEEE Transactions on Power Systems
In this paper a calculation method for quantifying the impact of complex short-circuits on active unbalanced distribution systems is proposed. Unlike previous distribution system short-circuit calculations, the proposed method is capable of solving complex short-circuits with an arbitrary number of faulted busses and phases, without predefining the boundary (fault) conditions. Different short-circuits are defined by simple inspection of these faults. Additionally, all distribution system elements are appropriately modeled and integrated in the proposed method, including electronically coupled distributed energy resources. The method is capable of solving unbalanced systems, including mutually coupled sections, in unsymmetrical pre-fault states, and it is performed in the sequence domain. This makes the proposed method particularly fast and suitable for on-line distribution system analysis. The computation results show the advantages of the proposed method relative to previous short-circuit calculation methods, regarding both the required calculation time and the accuracy.
1 July 2007 in Electric Power Systems Research
23 September 2019 in IEEE Transactions on Power Systems
In this paper, novel models for electronically coupled distributed energy resources (ECDERs) for online fault calculations of large-scale systems are proposed. ECDERs have different fault responses than traditional synchronous and induction (AC) machines, and generally accepted models for these emerging DERs do not exist. The deployment of ECDERs is constantly increasing worldwide and there is an urgent need for developing appropriate models for fault calculations. In order to have fast calculations, applicable to large-scale systems, the dynamic behavior of traditional AC machines have been approximated in three steady state time-periods (sub-transient, transient, and steady-state). Accordingly, the online fault calculations of large-scale systems have been conducted for these three periods. To simulate the ECDERs' dynamic behavior, and develop models that are compliant with traditional fault calculations, fault models of ECDERs in the sub-transient, transient, and steady-state periods are proposed, with a short peak current period included in the proposed models during the sub-transient period. To validate the proposed models, they are integrated into recently developed online fault calculations, and tested on various large-scale systems. Results from computer simulations are compared with results obtained using state-of-the-art laboratory equipment, as well as with relevant reports on fault current contributions of ECDERs. The results match very well, further validating the proposed models.
7 April 2017 in IEEE/CAA Journal of Automatica Sinica
In this paper a short-circuit computation U+0028 SCC U+0029 procedure for large-scale distribution systems with high penetration of distributed generators based on contemporary technologies is proposed. The procedure is suitable for real-time calculations. Modeling of modern distributed generators differs from the modeling of traditional synchronous and induction generators. Hence, SCC procedures found on the presumption of distribution systems with only traditional generators are not suitable in nowadays systems. In the work presented in this paper, for computation of the state of the system with short-circuit, the improved backward U+002F forward sweep U+0028 IBFS U+0029 procedure is used. Computation results show that the IBFS procedure is much more robust than previous SCC procedures, as it takes into account all distribution system elements, including modern distributed generators.
9 September 2010 in IEEE Transactions on Sustainable Energy
In this paper, we propose a new framework for the organization of the electric power industry, based on extensive use of information technology (IT) and on interactive decision making, where consumers and distributed producers join the traditional actors, utilities in particular, in making decisions. While many ideas considered in this paper have been put forward in recent years, such as the need to manage intermittency of renewable resources by means of proactive forecasting, and coordination with responsive demand and storage, we introduce a possible systematic IT-enabled mechanism necessary for the actual implementation of these technologies. We point out that in order to achieve a long-term sustainable energy utilization, it is essential to provide on-line information to internalize the value of just-in-time, just-in-place, and just-in-context distributed adaptation across the entire supply chain, ranging from the smallest consumers and energy providers, through their aggregators and system coordinators. We illustrate using our model-based novel simulator, how a carefully designed multidirectional and multitemporal information exchange could enable sustainable decision making while accounting for unique needs and capabilities of various resources and users. At the same time, information incentivizes the resources and users to contribute to system-wide sustainability objectives at value. We illustrate the dependence of such decisions-driven industry evolution on the industry rules (choice of performance objectives), as well as on the operating and planning practices for implementing the industry rules (temporal and spatial factors). Our model-based simulator could be used as a means of designing novel regulation defining rules, rights, and responsibilities regarding the type and rate of information to be exchanged in support of sustainable industry evolution.