Abduselam Aliyi

Abduselam Aliyi

Auto-generated profile, based on publicly available information

Abduselam Aliyi

Oromia Agricultural Research Institute, Jimma Agricultural Engineering Research Center, Renewable Energy Engineering Research Team, Jimma, Ethiopia

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 August 2025 in International Journal of Energy and Power Engineering
Verified
Journal Article
Open access
PDF file
ATAdem Tibesso
Adem Tibesso
AAAbduselam Aliyi
Abduselam Aliyi
YDYahikob Docha
Yahikob Docha
The energy created by the force of water can provide a more sustainable, non-polluting alternative to fossil fuels, with other renewable energy sources including wind, solar, tidal, geothermal, and bioenergy. Micro hydropower, which is hydro energy on a ‘small’ scale, provides hydro-mechanical and hydroelectricity to small communities. The purpose of this study is to conduct technical assessments of the micro-hydropower potential of generating hydroelectric and hydro mechanical power from existing irrigation schemes in Southwestern Oromia. From three zones, 14 schemes from Jimma Zone, 14 schemes from Buno Bedele Zone, and 3 schemes from Ilubabor Zone were selected; all of these schemes had the potential for irrigation and were functional, out of 13 woreda, 31 irrigation schemes were assessed. Among the analyzed schemes, the maximum Hydraulic power potential for micro-hydropower generation at 80% efficiency was 5.14kW at the Gura scheme in the Gechi woreda in the Buno Bedele zone. The maximum discharge and head recorded were 1.027m3/s and 1.4m at the Gura scheme in the Gechi woreda in the Bedele zone, and the Hursa scheme in the Gomma woreda in the Jimma zone. Some of the assessed schemes are not sufficient for micro-hydro power generation, except the Gura scheme in the Gechi woreda in the Buno Bedele zone. However, some of them are possible with technical advances for Pico-hydropower.

25 December 2024 in Industrial Engineering
Verified
Journal Article
Open access
PDF file
ATAdem Tibesso
Adem Tibesso
AAAbduselam Aliyi
Abduselam Aliyi
Teka Tesfaye MengeshaTeka Tesfaye Mengesha
Teka Tesfaye Mengesha
EAEphrem Assefa
Ephrem Assefa
One of the crucial post-harvest processes that contribute to the unique color, flavor, and taste of a coffee drink is drying technique. Solar drying refers to a technique that utilizes incident solar radiation to convert it into thermal energy required for drying purposes. A polyhouse solar dryer is a unique and cost-efficient method of drying agricultural products on a small as well as commercial scale. The fabricated dryer has three major units: a solar collector unit, a drying unit, and chimney unit components. The aim of this study was to manufacture and evaluate a 5-meter length and 2-meter width half-circled tunnel polyhouse type solar dryer using parchment coffee and hot pepper. The experimental results showed that the developed dryer has the capacity to dry averagely about 150 kg of hot pepper and 50 kg of wet coffee per batch. The obtained data were analyzed using software such as simple descriptive statistics and Origin Pro 2019 according to their suitability. Hot pepper was dried from an initial moisture content of about 82.95% to 10.42% in a polyhouse-type solar dryer within 6 days, while conventional sun drying took around 9 days. Using hot pepper, the average temperature inside the dryer was 53.90 °C to 62.57 °C in the full load condition, which was greater than the ambient temperature in all six days of the experiment. While the ambient relative humidity varies between 34.5% and 43.5%, the dryer's relative humidity using hot pepper was altered between 21.07% and 24.69%. In all six days of the experimental period, the relative humidity of the dryer was found to be less than that of ambient relative humidity due to the polyhouse effect. The wet coffee bean was dried from an initial moisture content of about 51.89% to 11.10% in a polyhouse-type solar dryer within 3 days, while by open-sun drying it took around 6 days. Using wet coffee, the temperature inside the dryer chamber were 50.08 °C to 54.08 °C at full load condition, which was greater than the ambient temperature in all three days of a tests. Whereas the ambient humidity in the air ranges from 39.77% to 42.22%, the dryer's relative humidity using wet coffee ranged between 22.22% and 23.46%. The average dryer thermal efficiencies of a polyhouse dryer use wet coffee beans and hot pepper were 64.48% and 86.87%, respectively.

1 September 2026 in Environmental Research Communications
Verified
Journal Article
Open access
EYEshetu Tadesse Ymer
Eshetu Tadesse Ymer
HLHirpa G. Lemu
Hirpa G. Lemu
ATAbduselam Aliyi Teso
Abduselam Aliyi Teso
MTMesay Alemu Tolcha
Mesay Alemu Tolcha
This study investigates the aging and performance degradation of crystalline silicon photovoltaic (PV) modules installed in Jimma, Ethiopia, a region characterized by high solar irradiance (5–6 kWh m − 2 d − 1 ), elevated temperatures, and humidity levels up to 85%. Polycrystalline and monocrystalline PV modules, aged 4 to 28 years, were evaluated using a current–voltage measurements normalized to standard test conditions. All modules exhibited significant encapsulant discoloration, cell cracks, and delamination, along with browning and yellowing of ethylene vinyl acetate. The annual degradation rates of power output, short-circuit current, and open-circuit voltage were approximately 1.53%, 0.88%, and 0.67%,with an associated uncertainty of ± 0.32 % for polycrystalline modules, and 1.58%, 1.196%, and 0.616%,with an associated uncertainty of ± 0.0 .26 % for monocrystalline modules, respectively, which exceeds typical manufacturer warranty limits of 0.5% to 0.7% per year. Performance degradation was further worsened by an increase in series resistance, resulting from metalization corrosion, solder joint fatigue, and microcracks, which reduced the fill factor and maximum power output. Concurrently, a decrease in shunt resistance, associated with encapsulant browning, moisture ingress, and delamination, increased leakage currents and reduced carrier collection efficiency. Consequently, power loss was dominated by declines in short-circuit current, linking optical, physical, and resistive degradation to electrical performance deterioration. The fast degradation observed in Jimma highlights the strong influence of high temperature and humidity on PV module longevity, emphasizing the need for climate-specific energy yield predictions and the deployment of PV technologies with enhanced durability in tropical environments.

22 October 2026 in International Journal of Economy, Energy and Environment
Verified
Journal Article
Open access
PDF file
KSKumale Sadeso
Kumale Sadeso
AAAbdusalam Aliyyi
Abdusalam Aliyyi
HGHusen Gisa
Husen Gisa
Large quantities of agricultural and agro-processing residues, including coffee husk and pulp, are generated annually in Ethiopia. Southwestern Oromia, particularly Jimma Zone, has abundant biomass resources such as coffee husk, rice husk, sawdust, and other agro-processing residues. However, these resources are often underutilized or burned using inefficient traditional cooking practices, contributing to environmental pollution and household exposure to smoke. This study was conducted to demonstrate and evaluate a household biomass stove under farmers’ conditions in selected districts of Jimma Zone, Oromia Regional State, Ethiopia. The specific objectives were to evaluate the performance of the stove under farmers’ conditions, create awareness about its use for household cooking, and assess farmers’ and other stakeholders’ feedback on the technology. The stove was tested using rice husk and coffee husk as fuels, with 5.5 L of water used for each test. The water temperature reached 96°C after 8.4 min using rice husk and 95°C after 7.7 min using coffee husk. Training was provided to 66 participants, comprising 57 farmers and 9 development agents (DAs), of whom 45 were women and 21 were men. A mini-field day was subsequently conducted with 104 participants, including 73 farmers, 7 DAs, 6 subject matter specialists (SMSs), and 18 other stakeholders. Feedback was collected from 63 respondents concerning the utility, suitability, availability and accessibility, maintainability, and portability of the stove. The majority of respondents expressed positive opinions regarding the technology. The results indicate that the biomass stove has potential for wider promotion in areas where suitable biomass residues are readily available. Scaling up the technology through farmer training, stakeholder linkages, local manufacturing, and improved access to maintenance and spare parts is recommended.

17 October 2025 in American Journal of Modern Energy
Verified
Journal Article
Open access
PDF file
ATAdem Tibesso
Adem Tibesso
AAAbduselam Aliyi
Abduselam Aliyi
2.7 billion People worldwide use solid biomass fuels for cooking, heating, and providing their daily energy needs. In most of the developing nations, the energy demand per household is covered mainly by woody biomasses. For instance, agricultural residues, animal dung, and charcoal are among the principal solid biomass fuels used in rural households for cooking and lighting. This research work aims to fabricate and performance evaluation of a wood gas stove for cooking purposes. The control cooking test (CCT) was conducted for wood gas stove evaluation and the results were compared with three stone traditional stoves and other related literatures. The stove’s experimental performance was evaluated by cooking with potatoes and analyzed by the control cooking test version 2.0 spreadsheet using two pots (3.5 L and 5.5 L) with and without an insulator using conifer wood. The CCT experimental results indicate that the average specific fuel consumption and time for cooking 2,282 g of potatoes were 98 g/kg, 142 g/kg, and 24 min, 28 min. for the wood gas cook stove with and without an insulator, respectively, using a 3.5 L pot. The average specific fuel consumption and cooking time for cooking 2,745 g of potatoes were 171 g/kg, 271 g/kg, and 27, 30 min. for the wood gas cook stove with and without an insulator, respectively, using a 5.5 L pot.