In many countries, water quality monitoring is limited due to the high cost of logistics and professional equipment such as multiparametric probes. However, low-cost sensors integrated with the Internet of Things can enable real-time environmental monitoring networks, providing valuable water quality information to the public. To facilitate the widespread adoption of these sensors, it is crucial to identify which sensors can accurately measure key water quality parameters, their manufacturers, and their reliability in different environments. Although there is an increasing body of work utilizing low-cost water quality sensors, many questions remain unanswered. To address this issue, a systematic literature review was conducted to determine which low-cost sensors are being used for remote water quality monitoring. The results show that there are three primary vendors for the sensors used in the selected papers. Most sensors range in price from US$6.9 to US$169.00 but can cost up to US$500.00. While many papers suggest that low-cost sensors are suitable for water quality monitoring, few compare low-cost sensors to reference devices. Therefore, further research is necessary to determine the reliability and accuracy of low-cost sensors compared to professional devices.
The present article discusses the institutional model adopted in Brazil regarding energy production through biomass. The utilization of renewable energy and clean sources of energy is a characteristic of Brazil’s energy matrix. Recently, the production of energy through biogas—and biomass in general—started to gain force. The concessionaires of energy, as well, started to discipline its utilization and selling, creating an impediment to the commercialization of energy produced by micro or mini generation outside the free energy market, as well as a prohibition of binding the contracts to the value of electric energy. Even though, it is possible to create a network of contracts that interconnect the producers and the consumers. In this line, the theoretical-empirical method was used to conclude that the model’s difficulties—and specially the legal limitations—can be overcome by adopting a network of contracts capable of subjecting renewable energy generation to an energy compensation model.
This study introduces a novel photoelectrocatalytic (PEC) system featuring a Ti-O-Cu mixed nanotubular oxide photoanode for the simultaneous activation of peroxymonosulfate (PMS), targeting the removal of emerging contaminants, such as methylene blue dye, tetracycline, and ibuprofen. The Ti-5.5Cu (atom %) alloy substrate and the nanotubular oxide layer were synthesized through arc melting and electrochemical anodization. The conditions of photoelectrocatalysis-assisted PMS activation (PEC/aPMS) were optimized using experimental design, achieving 90.4% decolorization of methylene blue dye within 30 min under optimal conditions: pH 4, an applied potential of 0.5 V vs Ag/AgCl, and a PMS concentration 50 times the molar concentration of the contaminant, utilizing a 10 W UV LED at 365 nm. In contrast, only 25% decolorization was observed without PMS. Singlet oxygen (1O2) was identified as the primary pathway for PMS activation (nonradical). Additionally, the PEC/aPMS system effectively degraded model contaminants, achieving 52% degradation of ibuprofen, 78% of methylene blue, and 92% of tetracycline in 10 mg L-1 total organic carbon solutions within 60 min under optimized conditions. The electrode exhibited remarkable stability, maintaining its efficiency throughout the experiments. These findings highlight the potential of mixed nanostructured oxide electrodes for developing highly efficient and durable PEC systems with integrated PMS activation for the removal of organic contaminants.
9 July 2024 in Environmental Monitoring and Assessment
Purpose: The purpose of this paper is to investigate straw modification by chemical degradation generated by two forms of pretreatment, using citric acid in an autoclave and urea solution with sodium hydroxide at low temperature. Design/methodology/approach: The material was digested and compared in biodigester reactors lined with natural straw, straw pretreated with citric acid, straw pretreated with urea and NaOH, and straw subjected to both the pretreatments. The amount of straw has been delimited to 0, 2.5, 5, 7.5 and 10 percent v/v, and used 20 percent v/v inoculum in all reactors, consisting of 30 percent v/v poultry litter and 70 percent swine wastewater (SW). The experiment was conducted in an incubator kept in mesophilic conditions (35°C). Findings: The results indicate significant change in the studied material, with degradation of lignin as well as hemicellulose and cellulose exposed to further hydrolysis. Spectrophotometric methods were used for monitoring degradation. These methods were efficient in monitoring changes caused by the treatments. When the proposed pretreatments are applied to sugarcane straw, there is a significant gain in biogas production (L g VSR−1). The most appropriate rates for higher methane production in the pretreatments are 2.5 and 5 percent straw-SW. The best results for the anaerobic digestion of sugarcane straw were obtained by pretreating it with citric acid. Originality/value: This paper shows a new use for the sugarcane straw waste after being pretreated with acid or base for the coproduction of biogas.