31 August 2021 in Eastern-European Journal of Enterprise Technologies
The paper presents studies of the system "induction generator-induction motor" with parametric asymmetry on a mathematical model to determine the quality of generated electricity in load operating modes. A mathematical model of the "induction generator-induction motor" system has been developed taking into account losses in steel and parametric asymmetry. The analysis of the transient characteristics of an induction generator when a motor load is connected in symmetrical and asymmetrical modes of operation is carried out. The results of changes in the main characteristics of an induction motor at various degrees of parametric asymmetry in the generator are presented. The quality of the generated electricity was analyzed based on the calculations of the unbalance coefficients for each of the operating modes. The assessment of the thermal state in steady-state conditions was carried out using an equivalent thermal equivalent circuit. Thermal transients were investigated when starting an induction motor from an autonomous energy source based on an induction generator. On a thermal mathematical model, the study of the effect of the output voltage asymmetry on the heating of the connected induction motor was carried out. It is shown that the asymmetry of the output voltage of an induction generator reaches 3–10 % and causes overheating of the windings in excess of the permissible values. A regression model has been developed for studying the operating conditions of an induction motor when powered by an induction generator with an asymmetry of the stator windings. The use of the obtained equations will make it possible to determine the most rational combination of factors affecting the heating of the stator windings of induction machines, in which they will not overheat above the maximum permissible temperature values of the corresponding insulation classes
25 August 2020 in Tekhnichna Elektrodynamika
Joomla! - the dynamic portal engine and content management system
19 March 2021 in CTE Workshop Proceedings
This article is an integrated study conducted to develop a learning model which would make it possible to identify the students’ changes of knowledge, abilities and skills acquisition over time as well as the formation of special features of their individual background. Authors have justified the application of the cybernetic model based on fractional equations for the description and evaluation of the student’s learning process. Learning is dealt as a transformation of young people’s knowledge, abilities and skills into a complex background, which envisages its implementation in the future professional activity. The advantage of the suggested model is better approximation characteristics which allow the consideration of a wide range of factors affecting the learning process including the youth’s neurodynamic and psychological nature. The research has employed both mathematical modeling methods and psychodiagnostic techniques (surveys, questionnaires). As a result of the findings, students who assimilate the content of teaching information and form personal experience in different ways have compiled different groups; the learning curve constructed on the basis of the heterogeneous differential equation of second order with integer powers has been compared with the set of models with equations of fractional order of aperiodic and fractional power components. The prospect of the issue to explore is the improvement of the suggested model considering special characteristics of cognitive processes aimed at the formation of an individual path of the student’s learning.
1 January 2020 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
28 February 2023 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. Study on energy consumption of mechatronic systems of mining excavators during the full production cycle, development of energy efficiency criterium for the production cycle of mining excavators, which ensures an increase in the technical and economic indicators of the operation of powerful mining equipment. Methodology. Mathematical modeling of electro-mechanical system of “front shovel” excavator, determination indicators of the production cycle, development of the criterion of energy efficiency of the mining excavator’s operating cycle taking into account the theory of technical systems efficiency. Findings. A mathematical model of a complete electro-mechanical system of an excavator with “generator-engine” electric drive has been developed, which includes a model of the mechanical part of the excavator. The closed-loop bucket positioning system makes it possible to implement various movement trajectories during the operating cycle. Numerical characteristics of energy consumption and duration for various movement trajectories of the working bodies of the excavator are obtained. A new criterion of energy efficiency of mechatronic systems of mining excavators is proposed. Originality. For the first time, a mathematical model has been proposed of an integral electro-mechanical system of an excavator according to the “front shovel” scheme, which includes models of electric drives of all mechanisms and a synchronous drive motor, as well as a model of the mechanical part of the excavator; this makes it possible to increase the accuracy of determining the excavator’s energy consumption and the operating cycle time. A criterion of energy efficiency is proposed, which takes into account the amount of resource costs, the overall result and the duration of the excavator’s operating cycle. Practical value. A mathematical model of the electromechanical system of an excavator with an electric drive according to the “generator-motor” system has been developed, which, taking into account the solution of the direct and inverse problems of the kinematics of the mechanical system of the excavator, makes it possible to compare parameters of various trajectories of movement of the excavator. The implementation of a closed system for positioning the excavator bucket in three-dimensional space was proposed, which creates conditions for increasing the level of automation of mining excavators. A criterion of the energy efficiency of the excavator’s technological cycle is proposed, which takes into account resource costs and the technological cycle duration.