13 January 2025 in Applied Physics Letters
Superconducting flip-chip interconnects are crucial for the three-dimensional integration of superconducting circuits in sensing and quantum technology applications. We demonstrate a simplified approach for a superconducting flip-chip device using commercially available indium microspheres and an in-house-built transfer stage for bonding two chips patterned with superconducting thin films. We use a gold-passivated niobium or niobium nitride layer as an under-bump metallization (UBM) layer between an aluminum-based superconducting wiring layer and the indium interconnect. At millikelvin temperatures, our flip-chip assembly can transport a supercurrent with tens of milliamperes, limited by the smallest geometric feature size and critical current density of the UBM layer and not by the indium interconnect. We show that the pressed indium interconnect itself can carry a supercurrent exceeding 1 A due to its large size of about 500 μm diameter. Our flip-chip assembly does require neither electroplating nor patterning of indium. The assembly process does not need a flip-chip bonder and can be realized with a transfer stage using a top chip with transparency or through-vias for alignment. These flip-chip devices can be utilized in applications that require few superconducting interconnects carrying large currents at millikelvin temperatures.
3 December 2024 in Physical Review A
Motivated by recent advances in the creation of few-body atomic Fermi gases with attractive interactions, we study theoretically the few-to-many-particle crossover of pair excitations, which for large particle numbers evolve into a mode that describes amplitude fluctuations of the superfluid order parameter (the “Higgs” mode). Our analysis is based on the hypothesis that salient aspects of the excitation spectrum are captured by interactions between time-reversed pair states in a harmonic oscillator potential. Microscopically, this assumption leads to a Richardson-type pairing model, which is integrable and thus allows a systematic quantitative study of the few-to-many-particle crossover with only minor numerical effort. We first establish a parity effect in the ground-state energy, i.e., a spectral convexity in the energy of open-shell configurations compared to their closed-shell neighbors, which is quantified by a so-called Matveev-Larkin parameter discussed for mesoscopic superconductors, which generalizes the pairing gap to mesoscopic ensembles and which behaves quantitatively differently in a few-body and a many-body regime. The crossover point for this quantity is widely tunable as a function of interaction strength. We then compute the excitation spectrum and demonstrate that the pair excitation energy shows a minimum that deepens with increasing particle number and shifts to smaller interaction strengths, consistent with the finite-size precursor of a quantum phase transition to a superfluid state. We extract a critical finite-size scaling exponent that characterizes the decrease of the gap with increasing particle number. Published by the American Physical Society 2024
9 October 2026 in Science Advances
Magnetic fields are constrained by the geometry and location of their sources, limiting the ability to freely tailor their spatial distribution. We introduce a general framework to passively convert the magnetic field generated by arbitrary sources into any prescribed desired field within a finite source-free region. Our method relies on field shaping using linear magnetic materials, enabling source-independent magnetic field molding. We provide the general recipe, analytical and numerical demonstrations for some paradigmatic examples, and a proof-of-concept experiment that validates the idea and materials implementation. This approach enables original possibilities in magnetic shielding, targeted field delivery, advanced imaging technologies, and a broad range of field-control applications.
9 December 2025 in Journal of Applied Physics
A key challenge in performing experiments with microparticles is controlling their adhesion to substrates. For example, levitation of a microparticle initially resting on a surface requires overcoming the surface adhesion forces to deliver the microparticle into a mechanical potential acting as a trap. By engineering the surface of silicon substrates, we aim to decrease the adhesion force between a metallic microparticle and the silicon surface. To this end, we investigate different methods of surface engineering that are based on chemical, physical, or physio-chemical modifications of the surface of silicon. We give quantitative results on the detachment force, finding a correlation between the water contact angle and the mean detachment force, indicating that hydrophobic surfaces are desired for low microparticle adhesion. We develop surface preparations decreasing the mean detachment force by more than a factor of three compared to an untreated silicon surface. Our results will enable reliable levitation of microparticles and are relevant for experiments requiring low adhesion between microparticles and a surface.
14 October 2026 in Quantum Science and Technology
We show how magnetostatic higher-order multipole traps can be used to generate macroscopic quantum interference of the motion of levitated superconducting microparticles. An appropriate combination of multipolar magnetic fields offers great versatility in constructing various trap potentials, including anharmonic trap potentials such as Duffing or double-well types. Crucially, the anharmonic trap potentials realize a nonlinearity on the order of hundred times the zero-point motion, i.e. on a length scale below nanometers. These anharmonic potentials allow for the generation of quantum features of the center-of-mass motion of a magnetically levitated superconducting microparticle. Importantly, they can be easily generated with a static arrangement of coils, requiring only that the current running through them is tunable. We propose protocols exploiting the versatility of the magnetic trap landscape to generate non-Gaussian motional states. We solve the dynamics of the center-of-mass motion of the particle in phase space and analyze its parameter dependence. Furthermore, we give a recipe to distinguish classical from quantum behavior in a statistically meaningful way through measurement of the position of the particle. Our results open a path to accessing the quantum regime of the center-of-mass motion of objects with masses larger than picogram, i.e. atomic mass units. This will enable fundamental physics experiments for studying the transition between quantum and classical behavior, exploring the intersection between quantum physics and gravity as well as probing of certain types of dark matter.