Magnetically levitated superconducting microparticles offer a promising path to quantum experiments with picogram to microgram objects. In this work, we levitate a 700 superconducting microsphere in a magnetic chip trap in which detection is integrated. We measure the center-of-mass motion of the particle using a dc superconducting quantum interference device magnetometer. The trap frequencies are continuously tunable between 30 and 160 Hz and the particle remains stably trapped over days in a dilution-refrigerator environment. We characterize the motional-amplitude-dependent frequency shifts, which arise from trap anharmonicities, namely, Duffing nonlinearities and mode couplings. We explain this nonlinear behavior using finite-element modeling of the chip-based trap potential. This work may constitute a first step toward quantum experiments and ultrasensitive inertial sensors with magnetically levitated superconducting microparticles.
1 February 2022 in IEEE Transactions on Applied Superconductivity
Magnetically-levitated superconducting microparticles have been recently proposed as a promising platform for performing quantum experiments with particles in the picogram regime. Here, we demonstrate the superconducting technology to achieve chip-based magnetic levitation of superconducting microparticles. We simulate and fabricate a chip-based magnetic trap capable of levitating superconducting particles with diameters from 0.5 $\,\mu$ m to 200 $\,\mu$ m. The trap consists of two stacked silicon chips, each patterned with a planar multi-winding superconducting coil made of niobium. The two coils generate a magnetic field resembling a quadrupole near the trap center, in which we demonstrate trapping of a spherical 50 $\mu$ m diameter SnPb microparticle at temperatures of 4 K and 40 mK.
Superconducting flip-chip interconnects are crucial for the three-dimensional integration of superconducting circuits in sensing and quantum technology applications. We demonstrate a simplified approach for a superconducting flip-chip device using commercially available indium microspheres and an in-house-built transfer stage for bonding two chips patterned with superconducting thin films. We use a gold-passivated niobium or niobium nitride layer as an under-bump metallization (UBM) layer between an aluminum-based superconducting wiring layer and the indium interconnect. At millikelvin temperatures, our flip-chip assembly can transport a supercurrent with tens of milliamperes, limited by the smallest geometric feature size and critical current density of the UBM layer and not by the indium interconnect. We show that the pressed indium interconnect itself can carry a supercurrent exceeding 1 A due to its large size of about 500 μm diameter. Our flip-chip assembly does require neither electroplating nor patterning of indium. The assembly process does not need a flip-chip bonder and can be realized with a transfer stage using a top chip with transparency or through-vias for alignment. These flip-chip devices can be utilized in applications that require few superconducting interconnects carrying large currents at millikelvin temperatures.