1 April 2019 in Nanotechnology
We have examined the influence of flake-substrate effects that affect one and few layers of MoS 2 in terms of their electrical and optical properties. In the measurements, we used SiO 2 /Si substrates with etched cavities and aluminum electrodes. Suspended areas are easily identifiable both on images depicting the topography and on the surface potential maps measured with the Kelvin probe force microscopy. Compared to the SiO 2 /Si supported material, surface potential decrease is observable at the membrane. The surface potential value of the flakes located on the electrodes is the lowest. PL measurements prove that single MoS 2 monolayer was obtained. Suspended regions are also correlated with maps obtained as a result of Raman spectroscopy.
23 October 2024 in Beilstein Journal of Nanotechnology
Focused electron beam-induced deposition (FEBID) is a novel technique for the development of multimaterial nanostructures. More importantly, it is applicable to the fabrication of free-standing nanostructures. Experimenting at the nanoscale requires instruments with sufficient resolution and sensitivity to measure various properties of nanostructures. Such measurements (regardless of the nature of the quantities being measured) are particularly problematic in the case of free-standing nanostructures, whose properties must be separated from the measurement system to avoid possible interference. In this paper, we propose novel devices, namely operational micro-electromechanical system (opMEMS) bridges. These are 3D substrates with nanometer-scale actuation capability and equipped with electrical contacts characterised by leakage resistances above 100 GΩ, which provide a platform for comprehensive measurements of properties (i.e., resistance) of free-standing FEBID structures. We also present a use case scenario in which an opMEMS bridge is used to measure the resistance of a free-standing FEBID nanostructure.
3 September 2025 in IEEE Sensors Journal
This study presents the design, fabrication, and experimental validation of a refractive index sensor system based on D-shaped multimode optical fibers integrated with optical time-domain reflectometry (OTDR). The sensor structure was developed by removing the cladding material to expose the fiber core with xenon plasma focused ion beam (Xe-PFIB) milling. Two types of graded-index multimode fibers, with core diameters of 62.5 μm and 50 μm, were used to investigate the influence of core size on sensor performance. In the experiment, the refractive indices of glycol-based solutions, ranging from 1.336 to 1.432, were measured using an OTDR system. The experimental results revealed a linear relationship between the normalized reflected light intensity and the refractive index of a substance. The sensor based on the 62.5-μm-diameter core fiber exhibited higher sensitivity, achieving a maximum of 1.169 a.u./RIU at 850 nm and 0.843 a.u./RIU at 1300 nm. In comparison, the sensor with a 50-μm core diameter reached sensitivities of 0.165 a.u./RIU at 850 nm and 0.285 a.u./RIU at 1300 nm. Simultaneous measurement with multiple sensors along an optical fiber was successfully demonstrated, confirming the feasibility of multipoint sensing with a standard OTDR system. These findings highlight the potential of the proposed system for real-time, remote monitoring applications where simple configuration, scalability, and compatibility with existing OTDR infrastructure are needed.
26 June 2026 in Measurement Science and Technology
Nanowires (NWs) exhibit distinct mechanical and electrical properties compared to bulk materials, with giant piezoresistive effect—characterized by exceptionally high gauge factors (GFs)—being of particular interest for nanoscale sensing applications. Precise characterization of this effect in focused electron beam-induced deposition (FEBID) NWs remains limited. Here we investigate the piezoresistive behavior of FEBID NWs composed of platinum–carbon, tungsten–carbon, and cobalt using a four-point measurement setup integrated within operational microelectromechanical systems inside a scanning electron microscope. FEBID NWs are fabricated as self-standing devices, grown bottom-up and contacted in the same nanometrological setup. Our results reveal a giant piezoresistive effect in tungsten–carbon NWs, exhibiting GFs exceeding 10 000, while cobalt NWs show moderate sensitivity and platinum–carbon NWs display no clear piezoresistive response. These findings demonstrate the potential of FEBID-fabricated NWs, particularly tungsten–carbon, for high-sensitivity strain sensing, advancing the development of nanoscale piezoresistive devices.