1 January 2023 in Physics of Fluids
An experimental investigation was conducted to better understand the effects of the humpback whale flipper's tubercles on biomimetic models. Different configurations of tubercles were investigated for five biomimetic flipper models by performing force measurement experiments at Re = 5×104, 8×104, and 1.2×105 and surface oil flow visualization at Re = 1.2×105. The experiments were carried out with five different test models that are two baseline models, two simply designed tubercle models with uniform distribution, and a proposed tubercle model having a more realistic approach. The proposed model pattern was created by summing two wave functions. The results indicated that the models having leading-edge tubercles increased lift and stall angle and reduced drag than the baseline model. The C3 designed with a more realistic approach has the best performance within other tubercles and baseline models for all Reynolds numbers. It has been seen that the maximum improvement is achieved from the lift coefficient by approximately 18% with the C3 at Re = 5×104. According to flow visualization results, the LSB formed in the smooth baseline model was replaced by a CRVPs in the tubercle models. The improvement of the aerodynamic characteristics is due to the CRVPs formed by the interaction of the leading-edge tubercles with each other and wavelike trailing-edge flow separation pattern. One of the significant findings to emerge from this study is that more realistic approach has the potential to obtain better performance than model with uniform distribution of tubercles.
1 November 2024 in Physics of Fluids
Biomimetics, the practice of drawing inspiration from nature to solve engineering challenges, has gained significant traction in aerospace design, particularly in the development of more efficient wing structures. This study investigated the aerodynamic potential of concept wing designs inspired by the Sooty Shearwater (Ardenna Grisea), a seabird renowned for its long-distance migratory capabilities and energy-efficient flight patterns. By leveraging the unique wing morphology of the Sooty Shearwater, three biomimetic wing models were developed using the Goettingen 173 airfoil. These designs were tested in a wind tunnel, where force measurements and flow visualization techniques were employed to evaluate their performance. Force measurement results show that a two-stage stall occurs for both models 1 and 2, with lift coefficient (CL) reaching an intermediate value when the first step occurs. Based on flow visualization results, model 1 demonstrates enhanced aerodynamic performance relative to the other models by dividing the laminar separation bubble into two sections in the spanwise direction as a result of the large stall cell formation. The findings reveal how specific aspects of the shearwater's wing structure can be translated into unmanned aerial vehicle designs, potentially enhancing aerodynamic efficiency in low-speed, low-Reynolds-number flight regimes.
3 April 2024 in Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
In the experimental study, the effects of vortex generators (VGs) having Clark-Y airfoil and triangular VGs are investigated. The tests were carried out on a tapered swept-back wing at Re = 6.0×104 using counter-rotating vortex generators having Clark-Y airfoil at five different locations that are x/c= 0.1, 0.2, 0.3, 0.4, and 0.5 and triangular VGs at x/c=0.1 location. A load cell is used to measure forces at angles of attack (AoA) ranging from 0° to 30°. It is observed that the maximum lift coefficient (CLmax) and aerodynamic performance of VGs having Clark-Y airfoil decrease when the position of the vortex generators changes from 0.1 to 0.5. The optimal results obtained from the study show that the tapered swept-back wing with the VGs having Clark-Y airfoil exhibits a significant increase of 37.5% in the CLmax and approximately 55% in the lift to drag ratio (L/D) at x/c=0.1 compared to the baseline. At low AoA, the VGs having Clark-Y airfoil provided better lift, whereas at high AoA, the triangular VGs provided better lift.
1 August 2025 in Physics of Fluids
In recent decades, experimental and numerical studies have demonstrated that wings with leading-edge (LE) tubercles exhibit advantageous aerodynamic performance at high attack angles compared to their unmodified counterparts. A substantial portion of these studies employed a single sinusoidal function to design the tubercles applied along the entire span. In this study, two functions were utilized to design tubercles. This experimental study was conducted to evaluate the effects of segmentally distributed (i.e., equally spaced) LE tubercles on the aerodynamic characteristics (ACs) of the National Advisory Committee for Aeronautics (NACA) 0018 airfoils and to associate them with the flow patterns observed on the suction surface. To this end, five different airfoil models have been produced and tested. The models consist of one plain airfoil, one fully tubercled airfoil, and three segmentally tubercled airfoils. The test results were obtained at Reynolds numbers (Re) of 0.6×105 to 1.2×105. It has been determined that the distance between neighboring tubercled segments possesses a critical value with regard to performance enhancements in the post-stall regime. In the range below this critical distance, the tubercled segments lack the capacity to reattach the separated flow from the plain segments of the airfoil. Furthermore, the presence of a novel vortical structure (i.e., single rotating vortex cell, SRVC) under certain conditions was demonstrated qualitatively.