Flow around a NACA 0015 airfoil with leading-edge tubercles was investigated using force measurements and flow visualization at 0 deg≤α≤30 deg. The experiments were carried out at a low Reynolds ...
An experimental investigation was conducted to better understand the effects of the humpback whale flipper's tubercles on biomimetic models. Different configurations of tubercles were investigated for five biomimetic flipper models by performing force measurement experiments at Re = 5×104, 8×104, and 1.2×105 and surface oil flow visualization at Re = 1.2×105. The experiments were carried out with five different test models that are two baseline models, two simply designed tubercle models with uniform distribution, and a proposed tubercle model having a more realistic approach. The proposed model pattern was created by summing two wave functions. The results indicated that the models having leading-edge tubercles increased lift and stall angle and reduced drag than the baseline model. The C3 designed with a more realistic approach has the best performance within other tubercles and baseline models for all Reynolds numbers. It has been seen that the maximum improvement is achieved from the lift coefficient by approximately 18% with the C3 at Re = 5×104. According to flow visualization results, the LSB formed in the smooth baseline model was replaced by a CRVPs in the tubercle models. The improvement of the aerodynamic characteristics is due to the CRVPs formed by the interaction of the leading-edge tubercles with each other and wavelike trailing-edge flow separation pattern. One of the significant findings to emerge from this study is that more realistic approach has the potential to obtain better performance than model with uniform distribution of tubercles.
An experimental study is conducted to research the combined effect of leading-edge (LE) tubercles and internal slots on the Clark-Y airfoil at Reynolds numbers (Re) of 5.0×104, 7.5×104, and 1.0×105 for angles of attack ranging from 0° to 30°. The Clark-Y is a cambered airfoil that performs well at low and medium Reynolds numbers, having a maximum thickness of 11.7% at 28% of the chord. Five different test models are the subjects of experiments, one of which is the baseline. The other test models are the Wavy model, which has LE tubercles, and the Wavy with three different slot positions: the Wavy-LES (leading-edge slot), the Wavy-MS (middle slot), and the Wavy-TES (trailing-edge slot). The LE tubercle geometry is formed by the sum of two sinusoidal wave functions with a realistic approach. In the present work, experimental studies are performed through force measurements, and detailed information on a 3-dimensional flow field is obtained by a surface-oil flow visualization technique. Force measurements indicate that the Wavy model delays stall and exhibits smoother stall behavior compared to the baseline. Moreover, the findings show that the lift coefficient (CL) of the Wavy model deteriorates in the pre-stall region with the inclusion of the internal slots but improves significantly in the post-stall region. Maximum improvement in CL in the post-stall region was achieved by 60% in Wavy-LES at Re of 5.0×104 as compared to the baseline. At Re of 5.0×104, Wavy and Wavy-MS present a better lift-to-drag ratio (CL/CD) than the other models in the pre-stall region, whereas the baseline is the best at Re of 1.0×105. The best CL/CD is achieved by Wavy-LES in the post-stall region, regardless of the Reynolds numbers. The variation of flow characteristics relevant to aerodynamic performance is revealed by surface oil flow visualization for all tested models.