Artur Myhovych

Artur Myhovych

Auto-generated profile, based on publicly available information

Artur Myhovych

National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 April 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
YPYuriy Petrakov
Yuriy Petrakov
VKVolodymyr Korenkov
Volodymyr Korenkov
AMArtur Myhovych
Artur Myhovych
This paper reports a new technology for designing control programs for contour milling on CNC machines. The technology enables stabilization of the cutting process along the entire contour at the optimal level by controlling the feed, which ensures an increase in productivity when meeting the requirements for restrictions. Moreover, the effectiveness of using the technology improves with an increase in the complexity of the contour by changing the curvature of the surface. A mathematical model has been built for the interaction between the cutter and workpiece in the cutting zone when machining contours with variable curvature, which makes it possible to determine the main characteristic of the cutting process – the rate of cutting the allowance. The technology involves the use of a control program in G codes designed in any CAM system. At the first stage, a shape-formation trajectory in the form of a two-dimensional digital array is derived from the program. At the second stage, the cutter workpiece engagement in the cutting area is modeled simulated while determining the main characteristic of the cutting process – an analog of the material removal rate. And at the final stage, the simulation results are used to design a new control program, also in G-codes, with a new recorded law to control the feed, which enables the stabilization of the cutting process along the entire milling path. The software for the new technology has been developed, which automatically converts the preset control program in G-codes into a two-dimensional digital array, simulates the milling process, and designs a new control program in G-codes based on its results. The results of the experimental study into the milling of the preset contour using the developed simulation program showed an increase in productivity by 1.7 times compared to the original control program, designed in a conventional CAM system

1 January 2023 in Journal of Engineering Sciences
Verified
Journal Article
Open access
YPYuri Petrakov
Yuri Petrakov
OOOleksandr Okhrimenko
Oleksandr Okhrimenko
MSMaksim Sikailo
Maksim Sikailo
AMArtur Myhovych
Artur Myhovych
The cutting force in end milling is the essential perturbation of the machining system that limits the productivity of the process. Therefore, forecasting the cutting force when assigning the processing mode and the geometry of the allowance layer to be cut is an urgent task that requires an operational tool for its solution. The method of calculating the cutting force is presented, based on a mechanistic approach, when the geometric ratios of the cutter blades’ positions on the sweep determine the thickness of the undeformed chip. The developed algorithm calculates the cutting force by double integration, first by the length of the cutting edge and then by the number of such edges. The algorithm also allows the simulating of the outrun of the mill on the cutting force and its components. The created application program visualizes the simulating process by oscillograms of the cutting force components for both up and down milling. Experimental studies, in general, proved the adequacy of the developed modeling method. The created program is a tool for operational forecasting of the cutting force during the technological preparation of the end milling process in production.

1 January 2025 in Journal of Engineering Sciences
Verified
Journal Article
Open access
YPYuri Petrakov
Yuri Petrakov
AMArtur Myhovych
Artur Myhovych
Contour milling processes are characterized by a quasi-stationary nature, which leads to the need to assign a cutting mode for the entire contour based on the most unfavorable cutting conditions in a particular area. Simultaneously, CNC machines allow for selecting different cutting modes for contour sections, stabilizing cutting conditions along the entire contour, and stabilization is advisable based on the material removal rate (MRR) criterion. The research deals with contour milling on a CNC machine. Since the process is quasi-stationary, the problem arises of stabilizing it by controlling the feed rate and spindle speed. Therefore, the MRR as the main process parameter was considered the research subject. This parameter determines the cutting intensity and is responsible for forming the required surface quality of the part. A computer program was developed to simulate the contour milling process by determining the main characteristic of the MRR process. At the first stage of the developed technology, using the created modeling program and a G-code control program, a digital file of the MRR dependence was created for the part’s contour. Such a file was used in a developed authors’ program to generate a G-code control file, which ensures stabilization of the cutting process according to the MRR criterion. Moreover, control was realized when changing the feed rate to discretize the resulting array with a specified percentage of the change step. This reduced the number of frames for the new control program while maintaining the positive effect of stabilizing the process in terms of MRR. The developed technology was tested for machining the contour with convex and concave sections in the trajectory. Experimental studies were conducted on a CNC milling machine with the workpiece mounted on a dynamometer table. This made it possible to record the cutting force during milling. As a result, the high efficiency of the developed technology was confirmed. Overall, process stabilization increased productivity approximately 3.0 times compared to the process designed in a CAM system at a constant feed rate and spindle speed.

20 August 2026 in Journal of Rocket-Space Technology
Verified
Journal Article
Open access
PDF file
AMArtur Myhovych
Artur Myhovych
AKArtem Kunytsia
Artem Kunytsia
This article evaluates deterministic and large language model (LLM)-based methods for comparing revisions of engineering documentation. Annual revisions of 14 CFR Part 25 for the period 2000-2025 were used as a structured aerospace regulatory case and converted to plain text for section-level comparison. Three approaches were assessed: normalized deterministic text comparison, LLM-GPT, and LLM-Gemini; LLM processing was applied only to segmented changed sections. The full corpus included 25 consecutive year-to-year pairs, and five pairs (2017-2018, 2018-2019, 2022-2023, 2023-2024, and 2024-2025) were manually labeled to evaluate substantive-change detection. The deterministic method processed the corpus in 57 s, produced 1,423 operations, whereas LLM-Gemini and LLM-GPT required 20,381 s and 55,441 s and produced 321 and 457 operations, respectively. On the labeled subset, mean pair-level recall for substantive changes ranged from 73.2% to 90.9%. The results show that deterministic comparison is required for coverage and traceability, while LLM-based comparison can provide a semantic layer for prioritizing meaningful revisions and identifying reference fragments. A hybrid workflow with expert review is recommended when changes may affect design, manufacturing, inspection, certification, or quality.

27 December 2024 in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
Verified
Journal Article
Open access
PDF file
YPYuri Petrakov
Yuri Petrakov
AMArtur Myhovych
Artur Myhovych
The article discusses a new method of modeling the cutter workpiece engagement during contour 2.5-D milling in order to determine the main process parameter - the material removal rate. A data preparation algorithm and a mathematical model of the engagement of the milling cutter with the workpiece are presented, which allow determining the instantaneous volume of the removed tool material and determining the cutting force according to the mechanical model during machining. For simulation, the representation of the workpiece and the tool in the form of polygons is used, and the cutting process is implemented using the logical operations "intersection" and "difference". This approach allows you to detect the volume of material removed by the tool during a certain simulation iteration, taking into account the geometry of its flutes, and to display the new geometric shape of the workpiece after removing material from it. Such a new form will be used to model the next step of the algorithm, which ensures the continuity of the process. The application of the developed algorithm and mathematical model allows obtaining correct data on the instantaneous volume of removed material, which is subsequently used to predict the cutting force and solve the problem of optimizing the contour 2.5D milling process.