A novel pulsometer was successfully developed using microelectromechanical systems (MEMS) based silicon-on-glass (SOG) technology for biomedical applications. The sensor was modelled and simulated in COMSOL Multiphysics® for pressures ranging from 0 to 40 mmHg. The capability of the fabricated pulsometer to detect movements in x and z-axis directions was investigated. The simulation results demonstrated displacement changes as high as of 98% and 36% in the x and z-axis directions, respectively for 40 mmHg, which correspond to typical radial blood pressure (rBP) on the wrist. In addition, an average capacitance change of 1 nF was experimentally obtained in the x-axis direction, from −5 V to 5 V. The response of the pulsometer is analyzed and presented in this paper.
An electrochemical sensor was fabricated on a flexible polyethylene terephthalate (PET) substrate for the detection of cadmium sulfide (CdS), a heavy metal compound. The sensor consists of a working and reference electrode that were gravure printed using silver (Ag) ink on the PET substrate. The performance of the sensor was investigated by measuring electrical impedance spectroscopy (EIS) for varying concentrations of the CdS. From the EIS based response, an impedance change of 11 ± 1%, 23 ± 1%, 34 ± 2% and 50 ± 3% was observed for the 1 pM, 1 nM, 1 µM and 1 mM concentrations of CdS, respectively when compared to de-ionized (DI) water, thus demonstrating the potential of employing gravure printed electrochemical sensors for heavy metal detection applications.