Wenping Zuo

Wenping Zuo

Auto-generated profile, based on publicly available information

Wenping Zuo

State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, Wuhan 430074, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
WXWang Xiang
Wang Xiang
SYSaizhao Yang
Saizhao Yang
GAGrain Adam
Grain Adam
HZHaobo Zhang
Haobo Zhang
WZWenping Zuo
Wenping Zuo
JWJinyu Wen
Jinyu Wen
To protect the converters and minimize the power transmission interruption during dc line faults, it is necessary to detect the faults at ultra high speed for the modular multilevel converter (MMC)-based HVdc grids. This article reviews the state-of-the-art of dc fault protection methods of MMC-HVdc grids, and summarizes the underlying principles of each method. On this basis, the dc fault characteristics analysis in terms of modal-domain, time-domain, and frequency-domain are analyzed, which direct the protection design. Typical boundary protection and nonboundary protection schemes are reviewed. The advantages and disadvantages of existing fault protection methods are compared. A two-terminal MMC-HVdc prototype is developed to test the effectiveness of three fault protection methods. Comprehensive quantitative assessments of the protection methods discussed above are carried out in a four-terminal MMC-HVdc grid. Finally, the future trends of the protection schemes are discussed and the findings are concluded.

7 March 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
XCXia Chen
Xia Chen
SMShi Mengxuan
Shi Mengxuan
Jianyu ZhouJianyu Zhou
Jianyu Zhou
YCYin Chen
Yin Chen
WZWenping Zuo
Wenping Zuo
HHHaibo He
Haibo He
Hybrid energy storage system (HESS) consisting of battery and supercapacitor (SC) is an effective approach to alleviate voltage stability problems brought by fluctuation of renewable resources in a DC microgrid. This paper proposes a novel distributed control scheme for multiple HESSs based on a leaderless consensus protocol to realize the power splitting between batteries and SCs and thus regulate the DC bus voltage. Without assigning leaders among the batteries and SCs, each SC or battery has equal priority in participating in voltage or state of charge (SOC) regulation using only neighboring information exchange instead of global communication. This distributed approach makes the system robust against any physical failure or communication fault only if the remaining communication network is connected. Consensus for the state variable associated with the battery SOC, the SC terminal voltage, and the DC average bus voltage are all achieved in this scheme, and thus the voltage quality and the energy storage lifetime can be improved. In addition, the small-signal stability of a four-HESS system is investigated, and the impact of the control parameters on the system is analyzed. Simulations and experimental studies are conducted to demonstrate the effectiveness of the proposed control scheme in an islanded DC microgrid.

19 August 2019 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
SYSaizhao Yang
Saizhao Yang
WXWang Xiang
Wang Xiang
XLXiaojun Lu
Xiaojun Lu
WZWenping Zuo
Wenping Zuo
JWJinyu Wen
Jinyu Wen
Modular multilevel converter (MMC) based high voltage direct current transmission (HVDC) is an effective solution for large-scale renewable power integration over long-distance. In the overhead MMC-HVDC systems, the high voltage DC circuit breakers (DCCB) are implemented to interrupt the DC fault current. Subsequent to fault isolation, the DCCBs are required to automatically re-close to restore power transmission quickly. However, when the DCCBs are re-closed to permanent faults, they will be tripped again, resulting in a high requirement of interruption capacity for DCCBs and second overcurrent strikes on the HVDC systems. To overcome the drawbacks of the conventional auto-reclosing scheme, this paper proposes an adaptive reclosing scheme based on the active pulse injection from the converter associated with the coordination control of hybrid DCCBs. The single-end adaptive reclosing scheme as well as two ends adaptive reclosing scheme dedicated to two-terminal HVDC systems and meshed DC grids are presented respectively. By applying this method, the location of faults can also be achieved in the case of permanent faults. In order to verify the effectiveness of the proposed adaptive reclosing schemes, extensive simulations have been conducted under PSCAD/EMTDC.

23 January 2019 in IEEE Transactions on Power Systems
Verified
Journal Article
Closed access
XCXia Chen
Xia Chen
JZJianyu Zhou
Jianyu Zhou
SMShi Mengxuan
Shi Mengxuan
LYLinfang Yan
Linfang Yan
WZWenping Zuo
Wenping Zuo
JWJinyu Wen
Jinyu Wen
The hybrid energy storage system (HESS) plays an essential role in the shipboard medium voltage DC (MVDC) system to provide backup power, buffer large load change, as well as improve power quality. In this paper, a novel virtual resistor and capacitor droop (VRCD) control is first proposed for HESS including battery, supercapacitor (SC), and flywheel. It enables the generator and multiple types of energy storages (ESs) with different characteristics to respond to multiple-frequency unbalanced power instead of simple high-frequency and low-frequency power sharing by the conventional droop control method. A detailed design procedure for the VRCD control is presented. Also, the secondary state of charge (SoC) recovery control is proposed to maintain high energy reserve of ESs for further power demand. Simulations are conducted to demonstrate the effectiveness of the control scheme proposed in a shipboard MVDC under particular loads fluctuation, such as the propulsion motor and the pulsed load.

20 November 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
XCXia Chen
Xia Chen
SMShi Mengxuan
Shi Mengxuan
Jianyu ZhouJianyu Zhou
Jianyu Zhou
WZWenping Zuo
Wenping Zuo
YCYin Chen
Yin Chen
HHHaibo He
Haibo He
In this paper, a distributed cooperative control scheme, considering the State of Charge (SoC) balance and power limits of Battery Storage Units (BSUs) in the consensus protocol, is proposed to achieve average bus voltage consensus in a DC microgrid with photovoltaics (PVs). The state variable defined in the consensus protocol enables all BSUs to charge or discharge together without introducing circulating currents among BSUs. Furthermore, by incorporating power limits of BSUs in the defined state variable, power violation of the BSUs can be prevented. The consensus-based distributed control only utilizes neighbor-to-neighbor communication to realize the global consensus and thus avoids the single point of failure compared to the conventional centralized control. Simulation and experimental results demonstrate the efficacy of the proposed method in an islanded DC microgrid under different testing scenarios.

23 September 2022 in IEEE Transactions on Smart Grid
Verified
Journal Article
Closed access
XYXiaodong Yang
Xiaodong Yang
CXChongbo Xu
Chongbo Xu
JWJinyu Wen
Jinyu Wen
YZYoubing Zhang
Youbing Zhang
QWQiuwei Wu
Qiuwei Wu
SCShijie Cheng
Shijie Cheng
Fault management is one of the crucial functions of Smart Grid to bring system back to normal operation from fault events. In this paper, we propose a multi-period cooperative solution for the jointly repair and restoration problem in distribution systems (DSs) to minimize the de-energized loads. In the proposed scheme, the novel fully-controlled power-electronic device SOP (soft open point) and fault isolation are included to accelerate system restoration. As the repair and restoration process goes forward, system topology changes frequently. How to determine the control mode of SOPs considering their characteristics during the entire restoration process is rarely studied in the literature. To this end, we present a new virtual power flow based automatic solution to adaptively perform control mode switching for the SOPs in faulted DS. Furthermore, a co-optimization model is formulated that coordinates SOP control, repair scheduling and DS restoration to obtain optimal repair and switch action sequences matching SOP control mode for DS resilience enhancement. The fault isolation is also conducted, since it has great impacts on repair and switch operations and can guarantee the safety of repair crews in practice. Numerical simulations on a modified IEEE 123-node test system and a large-scale actual distribution system verify the effectiveness of the proposed model.