Hybrid energy storage system (HESS) consisting of battery and supercapacitor (SC) is an effective approach to alleviate voltage stability problems brought by fluctuation of renewable resources in a DC microgrid. This paper proposes a novel distributed control scheme for multiple HESSs based on a leaderless consensus protocol to realize the power splitting between batteries and SCs and thus regulate the DC bus voltage. Without assigning leaders among the batteries and SCs, each SC or battery has equal priority in participating in voltage or state of charge (SOC) regulation using only neighboring information exchange instead of global communication. This distributed approach makes the system robust against any physical failure or communication fault only if the remaining communication network is connected. Consensus for the state variable associated with the battery SOC, the SC terminal voltage, and the DC average bus voltage are all achieved in this scheme, and thus the voltage quality and the energy storage lifetime can be improved. In addition, the small-signal stability of a four-HESS system is investigated, and the impact of the control parameters on the system is analyzed. Simulations and experimental studies are conducted to demonstrate the effectiveness of the proposed control scheme in an islanded DC microgrid.
31 October 2019 in IEEE Transactions on Power Systems
The conventional voltage observer based distributed control can make a tradeoff between voltage restoration and reactive power sharing. But it suffers from estimation error when there exists input disturbances, such as initial values and communication delays. To address this issue, this paper proposes a novel distributed secondary control based on PI consensus algorithm. A voltage controller and a frequency controller are designed separately to realize the restoration of voltage/frequency and also accurate reactive/active power allocation. Moreover, a detailed small-signal model with PI consensus algorithm is established to show the impact of the proposed control strategy on system stability. Compared with the conventional distributed control, the proposed control scheme is simpler with higher control accuracy under input disturbances. Simulations are conducted to verify the effectiveness of the proposed control strategy in an isolated ac microgrid.
20 November 2018 in IEEE Transactions on Industrial Electronics
In this paper, a distributed cooperative control scheme, considering the State of Charge (SoC) balance and power limits of Battery Storage Units (BSUs) in the consensus protocol, is proposed to achieve average bus voltage consensus in a DC microgrid with photovoltaics (PVs). The state variable defined in the consensus protocol enables all BSUs to charge or discharge together without introducing circulating currents among BSUs. Furthermore, by incorporating power limits of BSUs in the defined state variable, power violation of the BSUs can be prevented. The consensus-based distributed control only utilizes neighbor-to-neighbor communication to realize the global consensus and thus avoids the single point of failure compared to the conventional centralized control. Simulation and experimental results demonstrate the efficacy of the proposed method in an islanded DC microgrid under different testing scenarios.
11 November 2024 in IEEE Transactions on Power Electronics
Data-driven approach is promising for predicting impedance profile of grid-connected voltage source converters (VSCs) under a wide range of operating points (OPs). However, the conventional approaches rely on a one-to-one mapping between operating points and impedance profiles, which, as pointed out in this article, can be invalid for multiconverter systems. To tackle this challenge, this article proposes a stacked-autoencoder-based machine learning framework for the impedance profile predication of grid-connected VSCs, together with its detailed design guidelines. The proposed method uses features, instead of OPs, to characterize impedance profiles, and hence, it is scalable for multiconverter systems. Another benefit of the proposed method is the capability of predicting VSC impedance profiles at unstable OPs of the grid-VSC system. Such prediction can be realized solely based on data collected during stable operation, showcasing its potential for rapid online state estimation. Experiments on both single-VSC and multi-VSC systems validate the effectiveness of the proposed method.
The integration of numerous energy storage systems (ESSs) improves the reliable and economic operation of microgrids but also enlarges the burden of control and communication systems. This article proposes a cooperative hierarchical control for isolated microgrids with ESSs, which fully frees from the centralized paradigm and is therefore superior in flexibility and scalability. Firstly, the ESS cooperative control based on the distributed frequency controller is introduced for the state of charge (SoC) balance and the frequency regulation. Then, the ESS aggregation is considered. The aggregated ESS model is established and the real-time model parameters are derived by proposed distributed state observers. Finally, energy management is employed to allocate the output power between generators and the aggregated ESS. A detailed theoretical analysis of the dynamic and steady-state performance of proposed controllers and observers is provided. Simulations on the IEEE 33-bus and the 69-bus system verify the effectiveness of proposed methods.
16 June 2025 in IEEE Transactions on Sustainable Energy
Numerous small-scale energy storage systems (ESSs) are distributed throughout the power system and have the potential to be aggregated for power regulation. In this context, distributed power tracking control with aggregated capacity estimation is proposed for distributed ESSs. The proposed distributed control is free of the measure for total power while achieving accurate total power tracking. In addition, power allocation is performed among ESSs considering their types, SoC levels, and power/energy capacities. To estimate the dispatched power ranges of ESSs, an event-triggered distributed power capacity estimator is proposed with a relatively low communication burden. The power reference for the power tracking control is limited and therefore the reliable operation of the control is ensured. The proposed control and estimator are implemented in a discrete-time fashion and only rely on the sparse communication requirement. A detailed theoretical analysis is conducted to verify the equilibrium and convergence of the proposed approaches. Simulations based on the IEEE 33-bus system demonstrate the effectiveness of the proposed distributed power tracking control and the capacity estimator.