29 April 2022 in Advanced Electronic Materials
Molybdenum disulfide (MoS2) has great potential as a two‐dimensional semiconductor for electronic and optoelectronic application, but its high sensitivity to environmental adsorbents and charge transfer from neighboring dielectrics can lead to device variability and instability. Aluminum oxide (Al2O3) is widely used as an encapsulation layer in (opto)‐electronics, but it leads to detrimental charge transfer n‐doping to MoS2. Here, this work reports a scalable encapsulation approach for MoS2 field‐effect transistors (FETs) where hexagonal boron nitride (h‐BN) monolayers are employed as a barrier layer in‐between each of the Al2O3 and MoS2 interfaces. These devices exhibit a significant reduction of charge transfer, when compared to structures without h‐BN. This benefit of h‐BN in the gate stack is confirmed by ab initio density functional theory calculations. In addition, the devices with h‐BN layers show very low hysteresis even under ambient operating conditions.
10 May 2024 in npj 2D Materials and Applications
Intensive research has been carried out on two-dimensional materials, in particular molybdenum disulfide, towards high-performance field effect transistors for integrated circuits1. Fabricating transistors with ohmic contacts is a challenging task due to the formation of a high Schottky barrier that severely limits the performance of the transistors for real-world applications. Graphene-based heterostructures can be used in addition to, or as a substitute for unsuitable metals. In this paper, we present lateral heterostructure transistors made of scalable chemical vapor-deposited molybdenum disulfide and chemical vapor-deposited graphene achieving a low contact resistances of about 9 kΩ·µm and high on/off current ratios of 108. Furthermore, we also present a theoretical model calibrated on our experiments showing further potential for scaling transistors and contact areas into the few nanometers range and the possibility of a substantial performance enhancement by means of layer optimizations that would make transistors promising for use in future logic integrated circuits.
11 March 2025 in ACS Applied Materials & Interfaces
Two-dimensional material (2DM)-based field-effect transistors (FETs), such as molybdenum disulfide (MoS2)-FETs, have gained significant attention for their potential for ultrashort channels, thereby extending Moore's law. However, MoS2-FETs are prone to the formation of Schottky barriers at the metal-MoS2 interface, resulting in high contact resistance (Rc) and, consequently, reduced transistor currents in the ON-state. Our study explores the modification of MoS2 to induce the formation of conductive 1T-MoS2 at the metal-MoS2 interface via reverse sputtering. MoS2-FETs exposed to optimized reverse sputtering conditions in the contact area show Rc values reduced to less than 50% of their untreated counterparts. This reduction translates into improvements in other electrical characteristics, such as higher ON-state currents. Since reverse sputtering is a standard semiconductor process that enhances the electrical performance of MoS2-FETs, it has great potential for broader application scenarios in 2DM-based microelectronic devices and circuits.
9 April 2024 in Physica Status Solidi (a)
Transition metal dichalcogenides (TMDCs) are a promising class of two‐dimensional (2D) materials for flexible electronic applications due to their low integration temperature, good electronic properties, and excellent mechanical flexibility. Moreover, TMDCs offer the possibility of co‐integrating both n‐ and p‐type transistors on the same substrate, enabling the realization of complementary metal‐oxide‐semiconductor (CMOS) circuits. In this study, n‐type MoS2field‐effect transistors (FETs), and p‐type WSe2‐FETs integrated on a flexible foil substrate fabricated by standard thin‐film technology are presented. These devices exhibit high stability in their electronic operation under strain and repeated bending cycles. A CMOS inverter based on these transistors is also successfully demonstrated, which shows excellent switching behaviour with high gain (up to 100), high noise margin (0.87 · VDD), and low average static power consumption (40 pW).
25 October 2024 in ACS Applied Materials & Interfaces
Tungsten diselenide (WSe2) field-effect transistors (FETs) are promising for emerging electronics because of their tunable polarity, enabling complementary transistor technology, and their suitability for flexible electronics through material transfer. In this work, we demonstrate flexible p-type WSe2 FETs with absolute drain currents |ID| up to 7 μA/μm. We achieve this by fabricating flexible top-gated FETs with a combined WSe2 and metal contact transfer approach using WSe2 grown by metal-organic chemical vapor deposition on sapphire. Despite moderate WSe2 crystal grain size, our devices show similar or higher |ID| and ID on/off ratio (∼105) compared to most devices with exfoliated single-crystal WSe2 from the literature. We analyze charge trapping in our devices using pulsed and bias stress measurements. Notably, the high |ID| values are preserved during pulsing, where charge trapping is minimized. Overall, we demonstrate a fabrication approach advantageous for high drain currents in flexible 2D transistors.
12 March 2025 in ACS Applied Electronic Materials