Yichao Zhao

Yichao Zhao

Auto-generated profile, based on publicly available information

Yichao Zhao

School of Mines

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
YHYongliang He
Yongliang He
MGMingshi Gao
Mingshi Gao
HZHongchao ZHAO
Hongchao ZHAO
YZYichao Zhao
Yichao Zhao
This paper presents an innovative method for using foam concrete as a typical building material for soft structures in underground coal mines subjected to dynamic loading. To understand the behaviour of foam concrete under impact loading, a total of 30 specimens with a diameter of 50 mm and a height of 50 mm were experimentally tested using a 75 mm diameter split Hopkinson pressure bar (SHPB) device. The key parameters investigated in the present study included the type of foam concrete (fly ash and sand), the density of foam concrete (1000, 1200 and 1400 kg/m3), and the impact velocity (3.0, 4.0, 5.0, 6.0, and 7.0 m/s). Six specimens were also tested under static loading for comparison. The stress‐strain curve of foam concrete under impact loading showed three stages, started with a linear elastic stage, followed by a yield stage and ended with a pore wall destruction stage. The test results also indicated that the dynamic increase factor, ultimate compressive strength, tenacity, and specific energy absorption increase with the strain rate under the same density. In particular, both the failure model and the behaviour of foam concrete were affected by the impact velocity. The findings of this research provide a reference for further research on the application of foam concrete in underground coal mines.

1 January 2020 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
DXDONG XU
DONG XU
Mingshi GaoMingshi Gao
Mingshi Gao
YZYichao Zhao
Yichao Zhao
YHYongliang He
Yongliang He
XYXin Yu
Xin Yu
A novel method for fracturing coal is presented in this paper. A chemical solution is injected into coal under high pressure, whereby the coal is fractured and subsequently weakened by chemical erosion over time to produce an anti‐impact soft structure. In this study, the mechanical properties of coal under chemical erosion were investigated, and the fracturing design parameters were optimized. The uniaxial compression test and the split Hopkinson pressure bar (SHPB) test were used to determine the dynamic and static mechanical properties of coal after 20 days of immersion in different chemical solutions. After chemical solution erosion, the dynamic and static compressive strengths and elastic modulus of the coal decreased according to an exponential power law in the damage variable. The chemical treatment increased the duration of the pore compaction stage and decreased that of the elastic deformation stage, while decreasing the brittleness and increasing the ductility of coal. The acoustic emission (AE) curve of the immersed coal samples consisted of four stages corresponding to those of the stress‐strain curve: pore compaction‐closure, a slowly rising linear elastic regime, steady‐state prepeak crack propagation, and unsteady crack propagation at the peak strain. The increase in the damage variable of the coal sample from chemical erosion led to a lower dissipated energy, a higher fractal dimension, and a more fragmented coal sample. The effect of the investigated chemical solutions on weakening the coal mechanical properties decreased in the following order: alkaline solution > acidic solution > NaCl solution > distilled water. The experimental results provide a reference for weakening fractured coal seams.

1 January 2019 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
YZYi-Chao Zhao
Yi-Chao Zhao
Mingshi GaoMingshi Gao
Mingshi Gao
YHYong-Liang He
Yong-Liang He
DXDong Xu
Dong Xu
A coal‐rock (CR) combined body can be used to simulate structures of coal and rock strata, and its impact‐induced failure characteristic conforms more close to engineering practice. Exploring the mechanical properties and impact energy in a CR combined body contributes to better predictions of rock bursts in coal mines. In the study, the mechanical properties of CR combined bodies with four different inclinations (0°, 15°, 30°, and 45°) of structural planes were measured, and also their failure mechanism was analysed. Based on the theory of particle mechanics, a calculation model for impact energy in a CR combined body with inclinations was established and then verified by using monitored acoustic emission (AE) data. The test results showed that inclination affected mechanical properties and failure characteristics of the CR combined body, i.e., the larger the inclination, the lower the strength and impact energy in the CR combined body and the lower the level of damage. The proposed calculation model for impact energy revealed the mechanical essence of energy accumulation and release of a CR combined body, providing a reference for investigating rock burst in coal mines.