Vegetable-oil-based biolubricants are an excellent alternative to conventional lubricants. Instead of focusing on novel feedstocks, these biolubricants should be further elucidated based on their fatty acid composition, which influences their tribological properties. Therefore, the study utilises gene expression programming (GEP) to derive a boundary lubricity model for vegetable-oil-derived trimethylolpropane (TMP) esters, considering the fatty acid composition (saturation and monounsaturation levels), load and speed. Neat vegetable oil and blends from seven feedstocks are selected following a wide range of fatty acid profiles to synthesise TMP esters using a two-stage transesterification process. The TMP esters are spin-coated on wear discs that are subsequently rotated against a ball using a purpose-built tribometer. The frictional performance of the TMP esters with balanced saturation and monounsaturation levels of fatty acid are measured to improve it at higher speeds. The GEP model is statistically evaluated by adopting the friction data, a showing good generalisation and predictability capability. The model demonstrates that friction decreases with increasing saturation levels of the TMP ester. The GEP model for vegetable oil TMP esters allows for the tribological performance prediction of TMP esters following the fatty acid profile, providing a platform to optimise such biolubricant for desired applications.
Asymmetric laminates could exhibit unique behaviour of bistable response. This allows them to be attractive for applications that require a large deflection with a relatively small input energy. This work focuses on the measurement of the deflection profile of multidirectional carbon/epoxy composites. Four stacking sequences were considered: [0/90], [0/45], [45/0/90] and [45/–45/0/90]. The specimens were scanned using a three-dimensional laser scanner. The deflection data was then extracted at 25 equally spaced locations on the specimens. Next, the location and the magnitude of the maximum and minimum deflection were identified and compared. The findings from this paper provides some preliminary information on the curvature of the multidirectional composite laminates with the effect of number of plies and fibre orientation of the adjacent layers.