1 November 2013 in Energy Economics
1 July 2018 in International Journal of Electrical Power & Energy Systems
1 October 2017 in Electric Power Systems Research
This paper studies the impact of voltage source converter (VSC) losses on the solution of the optimal power flow (OPF) of hybrid AC/DC systems with a multi-terminal configuration. The motivation of this analysis is that the expected development of high voltage direct current (HVDC) systems will entail an increase of the number of converter stations, and consequently, converter losses might not be negligible when compared with conventional transmission losses of AC and DC lines. Towards this end, an extended OPF model is proposed considering a combination of VSC based multi-terminal HVDC grids (VSC-MTDC) and AC systems. The OPF model represents converter losses according to the state-of-the art modeling where different expressions are used when the converter functions as an inverter or as a rectifier. Three simpler alternative approaches are also implemented and the obtained OPF solutions are assessed. In order to compare the OPF solutions, a comparison metric is proposed. Obtained results show that modeling the converter losses in a simplified way could lead to very different power flow solutions, especially for the DC branches.Postprint (author's final draft
31 January 2012 in IEEE Transactions on Power Systems
Distribution networks are operated in a radial configuration, but their topology, especially in urban areas, is normally meshed in order to improve reliability of supply. This makes it possible to configure the network after a power outage to restore the service to affected customers by alternative ways of supply. Distribution operation and planning decisions usually involve network reconfiguration studies. Network reconfiguration entails changing the state of network switches to redistribute loads among feeders in order to restore service or minimize losses or alleviate overloads or voltages out of limits. The switching operation is the basic control action in network reconfiguration. A switching operation consists of closing the switch in an opened branch and opening the switch in a closed one, keeping the network configuration radial. As a consequence, the computation of sensitivities of the state variables with respect to switching operations is a useful resource for predicting the changes in a network during a reconfiguration process. This paper presents a method for computing the sensitivities of the state variables with respect to switching operations and obtaining estimations of voltages and power flows in the network. The proposed method not only provides accurate estimations, but also implies low computation load. To illustrate the performance of the developed method, a 16 bus test system and a real scenario of the 15-kV Madrid distribution system were analyzed. For both cases, the bus voltages and the feeder power flows were estimated and compared with the power flow solution. In addition, an analysis of the computation load is presented.
28 June 2017 in IEEE Transactions on Power Systems
Following the vision of future Supergrids, the existing power systems are expected to evolve into AC/DC systems containing Voltage Source Converters with multiterminal configurations. This paper presents a new sequential power flow algorithm for such power systems. The algorithm can be applied to systems with multiple AC and DC grids of any grid topology. Because of its pure AC/DC network decomposition the simplification of elements within the converter stations is not required, as is the case with other proposals in the literature. The paper also addresses the convergence properties of the proposed algorithm. A convergence factor has been designed that allows controlling the exit criterion within each inner loop of the sequential AC/DC load flow problem. It is shown that by modulating the convergence factor the number of inner loop iterations needed to achieve a solution can be diminished.
1 May 2012 in International Journal of Electrical Power & Energy Systems