Mohamed S. Zahran

Mohamed S. Zahran

Auto-generated profile, based on publicly available information

Mohamed S. Zahran

Military Technical College

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2016 in International Journal of Crashworthiness
Verified
Journal Article
Closed access
MZM. S. Zahran
M. S. Zahran
PXP. Xue
P. Xue
MEM. S. Esa
M. S. Esa
Multi-cell thin-walled structures have recently gained attentions in aerospace and automotive industries for their excellent energy absorption capacity with lightweight. This paper introduces a novel 3D-multi-cell design to enhance energy absorption capability of multi-cell thin-walled tubes by performing a new arrangement of the internal webs and dividing them into multilayers with different angles of orientation. A comparative study of energy-absorbing performance of single-cell, conventional multi-cell and the proposed three-dimensional multi-cell (3D-multi-cell) of thin-walled circular tubes under axial impact loading is carried out using the non-linear finite element code ANSYS-WORKBENCH/LS-DYNA. The numerical results show that the 3D-multi-cell configuration can achieve a significant improvement in the energy absorption per unit mass (SEA) up to 40%, the crush force efficiency (CFE) up to 42.5%, and the energy absorption effectiveness factor (ψ) up to 30.7% in comparison with those of circular tube. Furthermore, it can significantly improve the SEA up to 20%, the CFE up to 36.8%, and the ψ up to 20% in comparison with those of conventional multi-cell configuration. Furthermore, it is found that the number of layers and angle of orientations have a distinctive effect on the energy absorption capacity and the CFE.

1 December 2017 in Latin American Journal of Solids and Structures
Verified
Journal Article
Open access
PDF file
MKMuhammad Kamran
Muhammad Kamran
PXpu xue
pu xue
NANaveed Ahmed
Naveed Ahmed
MZM S Zahran
M S Zahran
AHA A G Hanif
A A G Hanif
Increase of energy absorption along with smooth load displacement curve, reduced peak force and high mean crushing force is the key in the modern dynamic design of structures. In this regard, a new metallic tubular configuration consisting of uni-sectional bi-tubular inner tubes, with outer tubes of multiple varied cross-sections is proposed and crushed under axial dynamic loading. A number of configurations are proposed ranging from simple to complex polygonal sections defined in three groups. Deformation modes and energy absorption characteristics such as peak crushing force, mean crushing force, and specific energy absorption are determined and discussed for each configuration. The proposed arrangement shows a stable crushing and higher values of crush force efficiency. In order to select the most suitable configuration, on the basis of maximum specific energy absorption, peak crushing force and minimum peak force, a robust decision making method known as Complex Proportional Assessment (COPRAS) is implemented. The optimal configuration in each group is determined on the basis of higher values of specific energy absorption, crush force efficiency and a lower value of peak crushing force, using the chosen weighting factors in COPRAS implementation. Finally, the configuration with inner and outer hexagonal tubes is found to be the best possible design concept among the top members of each group, with peak crushing force, mean crushing force and crush force efficiency values of 69.8 KN, 7.3 KJ and 0.75, respectively.

1 February 2017 in Latin American Journal of Solids and Structures
Verified
Journal Article
Open access
PDF file
MZM.S. Zahran
M.S. Zahran
PXpu xue
pu xue
MEM.S. Esa
M.S. Esa
MAM.M. Abdelwahab
M.M. Abdelwahab
GLGuoxing Lu
Guoxing Lu
State-of-the art studies of impact crushing circular stepped tube (inversion tube) introduce various approaches to improve the energy absorption capacities. Adding external longitudinal stiffeners on the circular stepped tubes is a new approach that have a great effect and interest. In the current study, finite element analysis using (LS-DYNA/WORKBENCH ANSYS) is performed on a series of numerical models of aluminum circular stepped tubes that are externally stiffened by a constant number of longitudinal stiffeners distributed around the cross section of the circular stepped tube. The numerical models are implemented under an axial impact crushing scenario. Furthermore, a new improved formula for prediction of steady inversion load is proposed. The theoretical predictions are found to be in good agreement with the numerical results with an error within 12%. A comparative study is conducted to compare the energy absorption characteristics and inversion mechanism between the newly proposed tubes and the conventional stepped tube. The results showed that addition of external longitudinal stiffeners on circular stepped tubes could imply greatest improvement for the energy absorption up to 104%, specific energy absorption capability (energy absorption per unit mass) up to 54.9%, the crush force efficiency up to 40.3% and increase the inversion stroke length in comparison with the unstiffened circular stepped tubes. A newfound role of external longitudinal stiffeners added to the stepped tubes that controls the inversion and deformation mechanism is presented.

1 January 2019 in Latin American Journal of Solids and Structures
Verified
Journal Article
Open access
PDF file
ZYZeliang Yu
Zeliang Yu
PXpu xue
pu xue
PYPeilun Yao
Peilun Yao
MZM. S. Zahran
M. S. Zahran
The wing leading edge is one of the aircraft structures which are vulnerable to birdstrike. Therefore, Federal Aviation Regulation has clear requirements of anti-birdstrike performance for wing leading edge. However, the impact location is not specified in aviation regulation. The forefront of the wing leading edge is selected as a critical location for the birdstrike in most researches. But the rationality of the selection is not given. This paper proposes an analytical method for determining the critical location that causes the most severe damage under impact due to birdstrike. The analysis is based on the concept of effective impact, i.e. the component of the bird velocity perpendicular to the surface of wing leading edge. A birdstrike model is established using Pam-crash and used to validate the analytical prediction. The numerical model proves its effectiveness compared to the birdstrike test. The residual compressive strength of the spar when the birdstrike is at the critical impact location determined by the proposed method is 44.5% of that at the traditional impact location. Moreover, the critical penetrating velocity of the traditional impact location is not the lowest. In other words, the traditional impact location is not the weakest. Airworthiness verification experiment of birdstrike on wing structure should pay attention to this aspect.

28 November 2019 in International Journal of Advanced Structural Engineering
Verified
Journal Article
Open access
PDF file
ATAhmed K. Taha
Ahmed K. Taha
ZGZhengguo Gao
Zhengguo Gao
DHDahai Huang
Dahai Huang
MZM. S. Zahran
M. S. Zahran
In this study, a non-linear three-dimensional hydrocode numerical simulation was carried out using AUTODYN-3D, which is an extensive code dealing with explosion problems. A high explosive material (comp-B) is blasted against several concrete wall barriers. The model was first validated using referenced experimental tests and has shown good results. Several numerical models were carried out to study the effect of changing the shape of wall barrier from flat to convex curve and concave curve, and also investigated the effect of changing the angle of curvature. The results showed that changing the shape of a wall barrier from flat to convex curve has the best performance in mitigating the effect of blast waves. It is also concluded that convex walls with 60° angle of curvature have the best performance compared to other barrier walls.

1 August 2017 in Latin American Journal of Solids and Structures
Verified
Journal Article
Open access
PDF file
NANaveed Ahmed
Naveed Ahmed
PXpu xue
pu xue
MKMuhammad Kamran
Muhammad Kamran
NZNaeem Zafar
Naeem Zafar
AMAmmara Mustafa
Ammara Mustafa
MZM.S. Zahran
M.S. Zahran
Thin walled multi-cell columns are highly efficient energy absorbers under axial compressions. Multi-cell features are usually obtained by placing stiffeners or ribs to get the required geometry features in the columns. In this study, the curved stiffeners with varying numbers in different configurations are used to support the circular single and bi-tubular metallic tubes and their shape, position and number effects are numerically investigated under dynamic axial crushing loads. Number of configurations can be classified by the number of tube/tubes and curved stiffened shells. This study can be divided in three parts; single tubes with cross-curved stiffeners with equal number of cells, single tubes with curved stiffened wall supports with ascending number of stiffeners, and bi-tubular tubes with ascending cross-curved stiffeners. The mass in each configuration is maintained as same by adjusting the thicknesses of the stiffeners. Energy absorption for all of the configurations are compared with published experimental literature of standard single tube and single tube with cross-straight stiffeners. Deformation modes and energy absorption characteristics are evaluated and discussed for all of the proposed configurations. Results indicate that the proposed configurations with curvy stiffeners are superior in energy absorption with increased mean crushing force and enhanced energy absorption along with a high value of crush force efficiency in comparison with the refernce configurations. Bi-tubular configurations with curvy stiffeners show a more stabalized response with the lowest peak crushing force in all of the proposed configurations.