Wenjin Yang

Wenjin Yang

Auto-generated profile, based on publicly available information

Wenjin Yang

Key Laboratory for Physical Electronics and Devices, Ministry of Education, Faculty of Electronic and Information Engineering, Xian Jiaotong University, Xian, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 June 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
WYWenjin Yang
Wenjin Yang
YLYong-Dong Li
Yong-Dong Li
HWHongguang Wang
Hongguang Wang
MJMing Jiang
Ming Jiang
MCMeng Cao
Meng Cao
CLChunliang Liu
Chunliang Liu
This article presents a fuzzy simple additive weighting multi-objective micro-genetic algorithm (FSAW-MO-MGA) for high-power microwave (HPM) sources optimization. The FSAW-MO-MGA and a single-objective genetic algorithm are independently used to optimize the same Ka -band relativistic backward-wave oscillator (RBWO) device. The use of the FSAW-MO-MGA allowed us to obtain an optimized device structure of RBWO with comprehensively improved performance. Particle-in-cell (PIC) simulation results show that the optimized RBWO can generate microwave pulses with an output power of 616.0 MW and an operating frequency of 30.33 GHz under a diode voltage of 625.6 kV, and the diode current is 6.59 kA at a guiding magnetic field of 0.8 T. Compared with the original RBWO, the output power of the optimized RBWO has been increased by 197.6%, the beam-to-microwave conversion efficiency has increased from 5.0% to 14.9%, and the beam-current transmission has increased from 70.13% to 87.72%. The reasons for these improvements in device performance are analyzed in detail.

19 March 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
WYWenjin Yang
Wenjin Yang
YLYong-Dong Li
Yong-Dong Li
HWHongguang Wang
Hongguang Wang
MJMing Jiang
Ming Jiang
MCMeng Cao
Meng Cao
LCLiu Chunliang
Liu Chunliang
To expedite the design of high-power microwave (HPM) devices, we developed a knowledge forward network (KFN) which will be trained using a specially generated dataset obtained through the D-optimality method, allowing it to be used under small sample conditions. Subsequently, we developed a discriminator network (DN) and a generator network (GN) separately. The DN is derived from the pretrained KFN and serves the purpose of evaluating whether the designed device meets the design targets. The GN is trained with the assistance of the DN to generate devices that meet the design targets. However, due to the nonlinear interaction between an electromagnetic field and the charged particles of a high-current relativistic electron beam of HPM devices, the prediction accuracy of the pretrained KFN is limited. To address this challenge, the particle-in-cell (PIC) simulation is introduced into the inverse design process as a validation method. The method has been validated in the article, and has successfully generated several relativistic backward-wave oscillators (RBWOs) that meet the design targets.

11 June 2024 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
WYWenjin Yang
Wenjin Yang
YLYong-Dong Li
Yong-Dong Li
HWHongguang Wang
Hongguang Wang
MJMing Jiang
Ming Jiang
YZyonggui zhai
yonggui zhai
LCLiu Chunliang
Liu Chunliang
To accelerate the design of a high-power microwave device, a deep learning assisted multi-objective optimization method is used to optimize a Ka-band relativistic backward-wave oscillator (RBWO) operating with a low magnetic field. Particle-in-cell simulation results show that the optimized RBWO with a tooth-shaped slow wave structure (SWS) can generate microwave pulses with an output power of 1.24 GW and an operating frequency of 26.8 GHz under a diode voltage of 623.3 kV, and the diode current is 6.56 kA at a guiding magnetic field of 0.8 T. Compared with the original RBWO, the output power of the optimized RBWO has been increased by 201.2%, and the beam-to-microwave conversion efficiency has increased from 10.0% to 30.3%. The detailed analysis reveals that in an overmoded RBWO with low guiding magnetic fields, the introduction of a tooth-shaped SWS is beneficial to mode competition, improves output power, and decreases microwave starting time.

22 March 2024 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
WYWenjin Yang
Wenjin Yang
HWHongguang Wang
Hongguang Wang
SRShumin Ren
Shumin Ren
YLYong-Dong Li
Yong-Dong Li
YZyonggui zhai
yonggui zhai
LCLiu Chunliang
Liu Chunliang
This article investigates the influence of high-energy secondary electrons on a Ka-band TM $_{03}$ relativistic backward-wave oscillator (RBWO) using the particle-in-cell (PIC) simulation code UNIPIC. The code incorporates a secondary electron emission (SEE) model suitable for high-incident electron energies. The PIC simulation results show that low-energy secondary electrons have minimal impact on the Ka-band RBWO. In contrast, although the emission yield of high-energy secondary electrons is small, these electrons can return near the cathode, significantly affecting output power and startup time. The insights from this study on the impact of high-energy secondary electrons on RBWO can offer valuable guidance for RBWO design and optimization.

11 June 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
WYWenjin Yang
Wenjin Yang
YLYong-Dong Li
Yong-Dong Li
HWHongguang Wang
Hongguang Wang
MJMing Jiang
Ming Jiang
YZyonggui zhai
yonggui zhai
In a relativistic backward wave oscillator (RBWO), the backflow of high-energy secondary electrons (HSEs) negatively impacts the beam-wave conversion efficiency (BWCE). To mitigate the influence of backflowing secondary electrons (SEs), an electron collection cavity (ECC) is introduced. A design method for the ECC, which considers the emission characteristics of SEs, is proposed to enhance its capability to capture SEs. Particle-in-cell (PIC) simulations confirm the efficacy of the ECC, leading to a significant increase in output power from 6.41 to 7.13 GW, and an improvement in BWCE from 35.3% to 39.4% in a klystron-like RBWO with an operating frequency of 4.3 GHz. A detailed physical analysis reveals that backflowing SEs do not significantly affect the phase matching between axial electric field and axial electron-beam current. However, the SEs disturb the electric field and harmonic current near the extractor, impacting the beam-wave interaction. In addition the SEs can extract energy from microwaves during their backflow, thereby reducing the BWCE.

24 February 2026 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
WYWenjin Yang
Wenjin Yang
HWHongguang Wang
Hongguang Wang
YLYong-Dong Li
Yong-Dong Li
YZyonggui zhai
yonggui zhai
MCMeng Cao
Meng Cao
CLChunliang Liu
Chunliang Liu
This article presents a tree-encoding-based multiobjective optimization algorithm (TMOA) for the hierarchical parameter (HP) optimization of high-power vacuum electronic devices (HPVEDs). The TMOA considers the structural parameter correlations of the HPVEDs, enabling integrated optimization of both the number of periods in the device’s high-frequency structure and the parameters of each unit. An efficient X-band TM ${}_{\mathbf {{02}}}$ klystron-like relativistic backward-wave oscillator (KL-RBWO) is designed using the TMOA. Particle-in-cell (PIC) simulations show that the TM ${}_{\mathbf {{02}}}$ KL-RBWO achieves an output power of 2.5 GW at a diode voltage of 736 kV, a current of 9.2 kA, and a guiding magnetic field of 2.8 T, with a frequency of 9.6 GHz and a beam-to-microwave conversion efficiency improved to 36.9%. Mechanism analysis indicates that the efficient KL-RBWO exhibits improved phase matching between the axial electromagnetic field and electron current, more reasonable energy spread in the electron beam, and more favorable harmonic current distribution.