A P-SiC (Phosphorus doped Si1-xCx) SD (Source Drain) was developed on bulk-Si based nMOS FinFETs (n-FinFETs). P-SiC epitaxial growth on SD provides strain to boost n-FinFET mobility and drive current. Combination of LA (Laser Anneal) and low temperature RTA recovers P-SiC and PSi (Phosphorus doped Si, Si1-xPx) strain. A SiGe clad channel on pMOS FinFETs (p-FinFETs) was investigated. Narrower Si fin and SiGe epitaxial growth on fins increase mobility and drive current, which is based on the same carrier transport mechanism as conventional phonon scattering without velocity overshoot around 14nm node.
As the nano scale device performance depends on the detailed engineering of the dopant distribution, advanced doping processes are required. Progressing towards 3D-structures like FinFETs, studying the dopant gate overlap and conformality of doping calls for metrology with 3D-resolution and the ability to confine the analyzed volume to a small 3D-structure. We demonstrate that through an appropriate methodology this is feasible using Atom Probe Tomography (APT). We extract the 3D-dopant profile and important parameters such as gate overlap and profile steepness, from transistor formed with plasma doping processes. Analyzing samples with different doping processes, the APT results are entirely consistent with device performances (Ioff vs. Ion).
This work presents a process to fabricate FinFETs in bulk silicon with advancements in critical fabrication steps such as STI trench oxide recess and adjustment of fin height. These steps are accomplished with the adoption of Siconi™ Selective Material Removal (SMR™) in the fabrication flow. FinFETs obtained with this new integration scheme were tested in a co-fabrication process flow proposed to integrate planar CMOS and FinFETs in the same wafer. Morphological and electrical results indicate perfectly filled trenches, better fin height control and bulk FinFET static performance similar to planar CMOS.
We successfully developed a 0.246-μm 2 embedded 6T-SRAM for high performance system LSIs. The 45-nm CMOS platform, which features reversed extension and S/D formation, achieves both high performance logic transistors (TV.) and SRAM integration. To take the worst case of process variations into consideration, cell layout is decided by a novel method using SRAM macros, which include over 100 sorts of parametrically designed cell layouts. As a result, the 0.246-μm 2 SRAM has been successfully developed with 140 mV of static noise margin (SNM) at 0.6 V and V ccmin of 0.9 V.