11 July 2014 in Wireless Personal Communications
24 April 2020 in IEEE Access
Tens of thousands of wireless industrial monitoring deployments exist today, logging more than 18 billion operating hours. These solutions have been around for over a decade and are based on standards such as WirelessHART and ISA100.11a to provide performance guarantees to the applications. The new trend in industry deployments is the convergence of operational and information technologies happening through the Industrial Internet of Things (IIoT) paradigm. The challenge is to bridge the performance of these well-proven industrial standards with the interoperability of IP-based systems. The Internet Engineering Task Force (IETF), the organization behind most of the technical solutions of the Internet, has produced a set of specifications with this requirement in mind. The output of this effort is the 6TiSCH protocol stack based on open standards, such as those that have played a key role in the Internet’s ubiquitous adoption. The standardization of 6TiSCH is done. The state-of-the-art research work focus is on important, but niche, optimizations and performance evaluations of the 6TiSCH stack. This paper takes a different approach – it evaluates the performance of the standards-compliant 6TiSCH solution from the end user point of view. It does so on two experimental testbeds, in typical IoT test scenarios based on a well-defined experimentation methodology. We provide a set of Key Performance Indicators (KPIs) useful for the end user to decide whether the 6TiSCH technology is a good fit performance-wise for a particular use case. We demonstrate reliability of a vanilla open-source implementation of 6TiSCH above 99.99%, upstream latency on the order of a second and radio duty cycle well below 1%.
1 January 2010 in IEICE Transactions on Communications
DMDiomidis S. Michalopoulos
Diomidis S. Michalopoulos
23 May 2017 in Wireless Personal Communications
28 July 2017 in Wireless Personal Communications
Independent living of older adults is one of the main challenges linked to the ageing population. Especially those living with diseases like COPD, MCI or frailty, need more support in everyday life and this is by itself a big societal challenge with impact in multiple sectors. In this paper we present eWALL, an innovative open-source eHealth platform that aims to address these challenges by means of an advanced cloud-based infrastructure. eWALL is designed in an innovative manner and achieved technical breakthroughs in eHealth platforms, while prioritizing user and market needs that are often abandoned and are the major reason for technically sound solutions that fail. We consider this as an opportunity and we aim to change the eHealth systems’ experience for older adults and break the barriers for the penetration of ICT solutions.
15 January 2019 in IEEE Wireless Communications Letters
A multi-relay assisted orthogonal frequency division multiplexing system with index modulation is proposed in this letter, assuming that amplify-and-forward (AF) relaying protocol is adopted at relays. Two commonly used AF protocols are considered: 1) fixed-gain AF and 2) variable-gain AF relaying protocols. To utilize relays in an efficient manner, we also employ two multi-carrier relay selection schemes termed bulk and per-subcarrier relay selection in the proposed system. We analyze the outage performance of the proposed system and derive closed-form expressions of the average outage probabilities (AOPs) for all cases with different AF relaying protocols and multi-carrier relay selection schemes. In addition, we obtain the asymptotic expressions of AOPs in the high signal-to-noise ratio region, by which it is proven that the full diversity gain equaling the number of relays is attainable.