This study presents a screening of microalgae strains for their resistance to heavy metals, specifically copper. Various species of green algae and cyanobacteria were examined, identifying strains with increased tolerance to metal contamination. Results indicate that at copper concentrations above 3 mg/L, growth is completely inhibited, while Nostoc sp. LK-20-1 exhibits survival and adaptation capabilities. The study also explored the physiological effects of copper exposure on microalgal morphology. In strains exposed to high copper levels (3 mg/L and above), significant changes were observed, including reduced cell size and the breakdown of chlorophyll pigments. Interestingly, Nostoc sp. LK-20-1 continued to form biomass in high copper environments, even though the cells exhibited minor pigmentation defects. This strain was further tested for its ability to grow across a range of copper concentrations (from 10 µg/L to 2 mg/L), revealing consistent growth at lower concentrations and partial recovery at higher levels. This strain shows potential for bioremediation of contaminated areas, offering prospects for environmentally safe decontamination technologies.
19 November 2025 in Transaction Kola Science Centre
This study investigates the feasibility of processing stale copper-nickel ore dressing tailings to recover non-ferrous metals and produce iron sulfate crystal hydrates. A method of heap bioleaching of pre-granulated tailings was proposed for the recovery of non-ferrous metals. The binding agents used for granulation were a 30 % sulfuric acid solution, a bacterial solution of Acidithiobacillus ferrooxidans, and polyvinyl acetate (PVA) glue. The results showed an inverse relationship between pellet strength and metal recovery efficiency. The highest metal concentrations during the heap bioleaching stage were observed in pellets prepared using sulfuric acid. To obtain iron sulfate crystal hydrates, sulfuric acid leaching of the ore dressing tailings (both as-received and ground to -71 µm) was conducted under static conditions at a temperature of ~22 °C. This selected regime yielded crystal hydrates of ferrous sulfate—rozenite and melanterite.
26 December 2025 in Transaction Kola Science Centre
This study investigates the feasibility of processing aged copper-nickel beneficiation tailings to recover non-ferrous metals and produce iron sulfate crystal hydrates. A method of heap bioleaching of pre-granulated tailings was proposed for the recovery of non-ferrous metals. The binding agents used for granulation were a 30% sulfuric acid solution, a bacterial solution of Acidithiobacillus ferrooxidans, and polyvinyl acetate (PVA) glue. The results showed an inverse relationship between pellet strength and metal recovery efficiency. The highest metal concentrations during the heap bioleaching stage were observed in pellets prepared using sulfuric acid. To obtain iron sulfate crystal hydrates, sulfuric acid leaching of the tailings (both as-received and ground to -71 µm) was conducted under static conditions at a temperature of ~22 °C. This selected regime yielded crystal hydrates of ferrous sulfate — rozenite and melanterite.