26 May 2021 in IEEE Transactions on Terahertz Science and Technology
In this work, a novel 670-GHz integrated direct-detection receiver using 25-nm InP HEMT technology is presented. This is the first demonstration of an integrated direct-detection radiometer architecture at these frequencies. The receiver exhibits a noise figure of 11.4 dB with a total dc power consumption of 0.25 W. The integrated receiver measures only 0.8 cm × 1.3 cm × 4.8 cm (0.3” × 0.5” × 1.9”). These results show that transistor-based direct-detection receivers are a viable technology for submillimeter-wave applications, with low SWaP with no compromise in performance.
20 November 2024 in IEEE Journal of Microwaves
Ice clouds are poorly constrained in current global climate and weather models and have been used as a tuning parameter in the models to balance radiation budget at the top of atmosphere and precipitation at the surface. Sub-millimeter-wave (Submm) remote sensing can fill the sensitivity gap of cloud ice observations between visible/infrared (VIS/IR) and microwave (MW) frequencies. The added value from submm-wave bands has been recognized for achieving a better understanding of cloud, convection and precipitation (CCP) processes. Recent satellite observations at microwave frequencies showed promising results that additional information on cloud microphysical properties (e.g., ice particle shape and orientation) can be inferred from V-pol and H-pol radiances. Motivated by the added value from cloud polarimeters, a compact SWIRP (Submm-Wave and Long-Wave InfraRed Polarimeter) was developed under NASA's Instrument Incubator Program (IIP) to reduce instrument size, weight, power (SWaP) for future Earth science missions. Low-SWaP sensors like SWIRP will allow the cost-effective implementation of a distributed observing system to study fast cloud processes with the needed spatiotemporal sampling.
6 November 2020 in IEEE Transactions on Terahertz Science and Technology
In this letter, a novel 1/f noise mitigation technique is presented to improve the receiver 1/f noise performance of a 670 GHz receiver. Time domain 1/f noise corrected samples are compared with samples obtained without the correction. Spectral domain analysis shows that the 1/f noise mitigation method improves the receiver noise performance by 19 dB in the receiver under test. The presented 1/f noise mitigation technique can be applied to any direct-detection receiver in the THz frequency range.
25 October 2019 in IEEE Transactions on Microwave Theory and Techniques
In this article, a 220-GHz direct detection polarimetric receiver is reported. This polarimetric receiver is intended for sensing of the microphysical properties of cloud ice in the earth's upper atmosphere. In the article, we report the measured RF performance, including RF gain of approximately 35 dB per channel and integrated noise figure of the receiver. The noise figure is measured to be 5.1 dB for the horizontally polarized channel and 5.4 dB for the vertically polarized channel. The receiver measures only 1.8 cm × 3.0 cm × 6.4 cm and has a total regulated dc power consumption of 520 mW. This article represents the first 220-GHz polarimetric direct detection receiver and is enabled by an advanced 25-nm indium phosphide (InP) HEMT monolithic microwave integrated circuit (MMIC) technology.
2 April 2026 in IEEE Microwave and Wireless Technology Letters
In this work, a suite of 35-nm InP high-electron-mobility transistor (HEMT) monolithic microwave integrated circuit (MMIC) chiplets are heterogeneously integrated on a 75- $\mu $ m SiC interposer. Performance of each integrated chiplet component is demonstrated at the F band (90–140GHz), including 50- $\Omega $ transmission lines, a 116-GHz bandpass filter with 4-dB loss and 10% bandwidth, and an F-band low noise amplifier (LNA) with 20-dB gain and a 3.6-dB packaged noise figure. These components are integrated on a single SiC interposer with an InP HEMT second-harmonic mixer to demonstrate an F-band downconverter multichiplet module. This is the first reported heterogeneous integration of the 35-nm InP HEMT process on SiC interposer, as well as the first reported F-band heterogeneously integrated downconverter.
30 September 2024 in IEEE Journal of Microwaves
Airplane produced contrail cirrus has a greenhouse effect in our atmosphere. It has an effect that is as much as or more than any other airplane emission such as airplane produced CO 2 Karcher et al. 2018. With air traffic anticipated to increase into the future it is important to understand contrail cirrus formation. We present a new receiver instrument using the 424 GHz (O 2 ) and 448 GHz (H 2 O) emission lines for thermal and humidity profiling that will provide data to model airplane contrail formation. Such an instrument can be used for guiding aircraft flight paths to reduce the development of contrail cirrus that can have an immediate greenhouse effect in our atmosphere.