12 March 2026 in IEEE Open Journal of the Industrial Electronics Society
Achieving first-time-right electromagnetic compatibility (EMC) is crucial in automotive industry for competitiveness. However, compliance with EM emission limits is usually evaluated through measurements on hardware prototypes, especially for complex system like electric vehicle (EV) powertrains, which include multiple components such as traction inverters (TIs) that collectively contribute to the overall emissions. Furthermore, several design goals, such as the amount of magnetic material or total installed filter capacitances, must be considered. Therefore, this paper introduces a simulation framework based on common- and differential-mode emission surrogate models with 16 design parameters. The models are derived from a circuit simulation model valid up to $30 \,\mathrm{M}\mathrm{Hz}$ and enable the prediction and optimization of conducted emissions (CEs) of traction inverters in the concept phase, prior to hardware prototyping. A Two-Level Traction Inverter (TLTI) system and CISPR 25 standard limits serve as an example. According to the feature selective validation (FSV) metric, the surrogate models achieve a worst-case accuracy rated as “very good” for CE prediction when trained on a dataset of 8064 samples. This corresponds to a spectral uncertainty of approximately $\pm 2 \,\mathrm{dB}$. With evaluation times of about $15 \,\mathrm{m}\mathrm{s}$, the presented surrogate models allow to perform 100 million TI optimizations in just $48 \,\mathrm{h}$, resulting in three selected optimal designs verified by circuit simulations. Therefore, the framework acts as a potential tool to develop first-time-right EMC and performance optimized prototypes.
10 February 2026 in IEEE Transactions on Electromagnetic Compatibility
Wide bandgap semiconductor devices enable improvements in power electronics efficiency and power density. However, their fast switching characteristics exacerbate high frequency electromagnetic interference challenges. Radiated emission prediction methods typically employ measured or calculated common-mode signals as AC noise sources based on transistor switching waveforms. These approaches are limited in bandwidth and are dependent on operation points. This work presents a novel measurement based modeling methodology with a measurement setup using a Gaussian Process Regression ($\mathcal {GPR}$) model to overcome the limitations by predicting the transistors drain voltage and source current in the frequency domain up to 1 GHz. We develop a setup to acquire the switching signals of a transistor in frequency domain across various operating conditions within a six dimensional input parameter space. Demonstrating in this article the simulation-based proof of concept of this approach, that a $\mathcal {GPR}$ model can predict the source current and the drain voltage of a transistor in frequency domain. The $\mathcal {GPR}$ model, which is trained in this work using simulation data, predicts the transistors source current in the frequency domain for unseen operating points with a maximum NRMSE of $2.1 \,\%$. These results are establishing a novel approach for noise source modeling in radiated emission models of power converter systems.