Over a period of less than a decade, distributed acoustic sensing (DAS) has become a well-established technology in seismology. For historical and practical reasons, DAS manufacturers usually provide instruments that natively record strain (rate) as the principal measurement. While at first glance strain recordings seem related to ground motion waveforms (displacement, velocity and acceleration), not all the seismological tools developed over the past century (e.g. magnitude estimation, seismic beamforming, etc.) can be readily applied to strain data. Notably, the directional sensitivity of DAS is more limited than conventional particle motion sensors, and DAS experiences an increased sensitivity to slow waves, often highly scattered by the subsurface structure and challenging to analyse. To address these issues, several strategies have been already proposed to convert strain rate measurements to particle motion. In this study, we focus on strategies based on a quantity we refer to as ‘deformation’. Deformation is defined as the change in length of the cable and is closely related to displacement, yet both quantities differ from one another: deformation is a relative displacement measurement along a curvilinear path. We show that if the geometry of the DAS deployment is made of sufficiently long rectilinear sections, deformation can be used to recover the displacement without the need of additional instruments. We validate this theoretical result using full-waveform simulations and by comparing, on a real data set, the seismic velocity recovered from DAS with that recorded by collocated seismometers. The limitations of this approach are discussed, and two applications are shown: enhancing direct P-wave arrivals and simplifying the magnitude estimation of seismic events. Converted displacement provides better sensitivity to high velocity phases, improves broadside response and permits the direct application of conventional seismological tools that are less effective when applied to strain (rate) data.
2 November 2023 in Geophysical Journal International
SUMMARY: Continuous seismic monitoring of volcanoes is challenging due to harsh environments and associated hazards. However, the investigation of volcanic phenomena is essential for eruption forecasting. In seismo-volcanic applications, distributed acoustic sensing (DAS) offers new possibilities for long-duration surveys. We analyse DAS strain rate signals generated by volcanic explosions and tremor at Stromboli volcano (Italy) recorded along 1 km of dedicated fibre-optic cable. We validate DAS recordings with colocated nodal seismometers. Converting node measurements to strain rate, we observe a perfect match in phase between DAS and node waveforms. However, DAS amplitudes appear to be around 2.7 times smaller than those of node records, which we explain as due to the inefficient ground-to-fibre strain transfer in the loose cable. We invert time delays between strain rate waveforms and confirm that the DAS enables us to retrieve a dominant and persistent seismic source in the proximity of active craters. This stable source location is confirmed by node array analyses. Despite an observed high noise level of strain rate signals outside a range of 2–15 Hz, our results demonstrate the potential of this new technology in monitoring volcanic areas.
Xdas is a Python library designed to manipulate distributed acoustic sensing (DAS) data. It provides a unified abstraction for reading any DAS file format into a standardized Python object, streamlining data handling across different acquisition systems. To address the challenge of massive, multifile data sets, Xdas aggregates data chunks into virtually contiguous arrays organized by instrument and acquisition. This structure allows for efficient spatial and temporal slicing while minimizing overhead. To enable scalable offline processing of massive DAS data sets, Xdas processes data in manageable chunks. To ensure processing continuity, Xdas uses a stateful pipes-and-filters architecture. Most Xdas operations are multithreaded by default to take full advantage of multicore systems. This approach also enables real-time data processing. Its built-in network streaming capabilities allow Xdas to be deployed on DAS instruments for custom, real-time workflows at the point of data generation. At its core, Xdas uses a labeled ND (N-dimensional) array structure that encapsulates both data values and coordinate metadata and can be used to handle any kind of data set (not just time–space DAS records). This data model adheres to the established standards provided by the NetCDF4/HDF5 formats and the Climate and Forecast conventions. Designed to mirror the application programming interfaces (APIs) of popular libraries such as NumPy, SciPy, and Xarray, Xdas minimizes the learning curve for new users. Its modular and extensible design means that adding support for a new file format or integrating a processing function typically requires less than 10 lines of code.
16 January 2026 in Earth and Planetary Science Letters
Pyroclastic flows are highly hazardous phenomena demanding precise detection, localization, and comprehensive characterization for effective volcanic risk management. During October and December 2022, the volcanic activity of Stromboli produced more than 60 pyroclastic flows. The flows propagated from the craters (~700 m a.s.l.) to the sea, resulting in tsunami waves ranging from centimetres to meters in height. These events coincided with an experiment involving distributed acoustic sensing (DAS) data acquisition with a dedicated 4-kilometer-long fibre-optic cable. A 3-component array consisting of 27 geophones and the multi-parameter monitoring network managed by the Laboratory of Experimental Geophysics (LGS) at the University of Florence were active simultaneously. We study two distinct pyroclastic flows of varying intensities. Using array processing techniques applied to DAS, seismic, and infrasonic measurements, we estimate back-azimuths that consistently track flows moving at velocities between 40 and 50 m/s from the craters to the shoreline. Validation of these measurements was accomplished through georeferenced images obtained by a visible camera, affirming their accuracy. These results demonstrate the effectiveness of the three datasets in monitoring pyroclastic flows and the need for multi-parametric observations for a better interpretation of volcanic phenomena.
29 January 2026 in Communications Earth & Environment
Detecting, locating, and characterising the dynamics of destabilised volcanic material is critical for assessing the extreme hazards posed by volcanic mass flows, such as pyroclastic density currents. Geophysical measurements of these events may offer information otherwise hardly observable at close range. Here we investigate pyroclastic density current dynamics using a multiparameter approach that combines seismic, distributed acoustic sensing, and infrasound data with thermal and visible imagery, supported by numerical simulations. We focus on two events at Stromboli volcano, Italy, that occurred in October and December 2022. By comparing visible imagery with seismic energy and applying array processing techniques, we identify different flow volumes ( ~23.5 ± 9.5 × 10 3 m 3 and ~80 ± 9 × 10 3 m 3 , respectively) and velocities (33-42 m/s and 54-59 m/s, respectively). Simulations reveal that reproducing these velocities requires volume-dependent empirical friction angles ( ~27° and 21°), consistent with dry granular flow behaviour and friction weakening. These findings offer new insights into the use of distributed acoustic sensing for volcanic monitoring and underscore the value of integrating multiparameter data with modeling to better understand complex volcanic processes.