18 September 2023 in Geophysical Journal International
Over a period of less than a decade, distributed acoustic sensing (DAS) has become a well-established technology in seismology. For historical and practical reasons, DAS manufacturers usually provide instruments that natively record strain (rate) as the principal measurement. While at first glance strain recordings seem related to ground motion waveforms (displacement, velocity and acceleration), not all the seismological tools developed over the past century (e.g. magnitude estimation, seismic beamforming, etc.) can be readily applied to strain data. Notably, the directional sensitivity of DAS is more limited than conventional particle motion sensors, and DAS experiences an increased sensitivity to slow waves, often highly scattered by the subsurface structure and challenging to analyse. To address these issues, several strategies have been already proposed to convert strain rate measurements to particle motion. In this study, we focus on strategies based on a quantity we refer to as ‘deformation’. Deformation is defined as the change in length of the cable and is closely related to displacement, yet both quantities differ from one another: deformation is a relative displacement measurement along a curvilinear path. We show that if the geometry of the DAS deployment is made of sufficiently long rectilinear sections, deformation can be used to recover the displacement without the need of additional instruments. We validate this theoretical result using full-waveform simulations and by comparing, on a real data set, the seismic velocity recovered from DAS with that recorded by collocated seismometers. The limitations of this approach are discussed, and two applications are shown: enhancing direct P-wave arrivals and simplifying the magnitude estimation of seismic events. Converted displacement provides better sensitivity to high velocity phases, improves broadside response and permits the direct application of conventional seismological tools that are less effective when applied to strain (rate) data.
23 January 2024 in Journal of Geophysical Research: Solid Earth
Distributed Acoustic Sensing (DAS) is becoming a powerful tool for earthquake monitoring, providing continuous strain‐rate records of seismic events along fiber optic cables. However, the use of standard seismological techniques for earthquake source characterization requires the conversion of data in ground motion quantities. In this study we provide a new formulation for far‐field strain radiation emitted by a seismic rupture, which allows to directly analyze DAS data in their native physical quantity. This formulation naturally accounts for the complex directional sensitivity of the fiber to body waves and to the shallow layering beneath the cable. In this domain, we show that the spectral amplitude of the strain integral is related to the Fourier transform of the source time function, and its modeling allows to determine the source parameters. We demonstrate the validity of the technique on two case‐studies, where source parameters are consistent with estimates from standard seismic instruments in magnitude range 2.0–4.3. When analyzing events from a 1‐month DAS survey in Chile, moment‐corner frequency distribution shows scale invariant stress drop estimates, with an average of Δ σ = (0.8 ± 0.6) MPa. Analysis of DAS data acquired in the Southern Apennines shows a dominance of the local attenuation that masks the effective corner frequency of the events. After estimating the local attenuation coefficient, we were able to retrieve the corner frequencies for the largest magnitude events in the catalog. Overall, this approach shows the capability of DAS technology to depict the characteristic scales of seismic sources and the released moment.
1 January 2023 in The Journal of the Acoustical Society of America
We report in this study how ocean-bottom seismometers (OBS) can be used as passive sonars to automatically detect, localize, and track moving acoustic sources at the ocean surface. We developed single-station methods based on direction of arrival and on multi-path interference measurements capable of handling continuous erratic signals emitted by ships. Based on a Bayesian mathematical framework, we developed an azimuthal detector and a radial detector and combined them into a fully automatic tracker. We tested the developed algorithm on seismic and hydroacoustic data recorded in the Indian Ocean by an OBS deployed at 4300 m depth, 200 km west of La Réunion Island. We quantified the performances using archives of commercial-vessel trajectories in the area provided by the Automatic Identification System. Detectors demonstrate capabilities in the detection range up to 100 km from the OBS with azimuthal accuracies of a few degrees and with distance accuracies of a few hundred of meters. We expect the method to be easily transposed to any other kind of sources (such as marine mammals).
24 September 2022 in Journal of Geophysical Research: Solid Earth
30 December 2024 in Seismica
Owing to its deployment and sensing characteristics, Distributed Acoustic Sensing (DAS) has been touted as a promising technology for low-cost and low-latency Earthquake Early Warning (EEW). While preliminary experiments conducted by several research groups have yielded encouraging results, it must be acknowledged that these EEW feasibility studies were performed only on low-magnitude events. When exposed to the wavefield of a large magnitude earthquake (being the prime subject of EEW), the DAS strain rate recordings are likely to become highly distorted ("saturated") due to cycle skipping of the optical phase measurements, to an extent that the recorded data start to degrade to uniform random noise. This clearly poses a major challenge to EEW, as neither amplitude nor phase information can be readily extracted from saturated DAS data. In this study, we perform a detailed analysis of the dynamic range of DAS, both from theoretical and practical perspectives. We offer a set of criteria that need to be met for matching the DAS dynamic range with EEW targets, and we propose a computationally convenient method to quantify the information content of saturated recordings. We apply these methods to DAS data recorded offshore Chile, and identify several avenues for future research to improve the feasibility of DAS for EEW.
2 November 2023 in Geophysical Journal International
SUMMARY: Continuous seismic monitoring of volcanoes is challenging due to harsh environments and associated hazards. However, the investigation of volcanic phenomena is essential for eruption forecasting. In seismo-volcanic applications, distributed acoustic sensing (DAS) offers new possibilities for long-duration surveys. We analyse DAS strain rate signals generated by volcanic explosions and tremor at Stromboli volcano (Italy) recorded along 1 km of dedicated fibre-optic cable. We validate DAS recordings with colocated nodal seismometers. Converting node measurements to strain rate, we observe a perfect match in phase between DAS and node waveforms. However, DAS amplitudes appear to be around 2.7 times smaller than those of node records, which we explain as due to the inefficient ground-to-fibre strain transfer in the loose cable. We invert time delays between strain rate waveforms and confirm that the DAS enables us to retrieve a dominant and persistent seismic source in the proximity of active craters. This stable source location is confirmed by node array analyses. Despite an observed high noise level of strain rate signals outside a range of 2–15 Hz, our results demonstrate the potential of this new technology in monitoring volcanic areas.