Emitters are important components of drip irrigation systems, and the use of labyrinths as a mechanism of energy dissipation stands out in the drippers’ design. Relating the geometric characteristics of labyrinths with their operational and hydraulic characteristics is not trivial and generally requires the use of computational simulation tools. This study developed and evaluated models that can predict the discharge of labyrinth channels as a function of their geometry to make possible the rapid prediction of pressure–discharge curves due to modifications in the labyrinth geometry. An empirical mathematical model was developed based on nonlinear regression, and a computational model was trained based on artificial neural networks (ANNs). Twenty-four designs of prototypes were built in polymethyl methacrylate to operate at a discharge of approximately under 100 kPa. The pressure–discharge curve of each prototype was determined in the laboratory in the range 50–350 kPa. Based on the experimental data, the coefficients of an empirical nonlinear model were fitted, and 11 single-hidden-layer ANN architectures were compared. The best accuracy was provided by an ANN architecture with an input layer with six neurons, six neurons in the hidden layer, and an output layer with a single neuron. The maximum relative errors of the predicted discharges were 9.5% and 9.4% for the ANN and nonlinear models, respectively. Both models were accurate and enabled rapid prediction of the emitter’s discharge. An open-source web application was developed to simulate the pressure–discharge curve of labyrinths within a range of geometric and operational characteristics.
Insect behaviors, such as flying, oviposition, parasitism, mating/calling, response to semiochemicals, and others, might be influenced by barometric pressure fluctuations. Abiotic factors controlled in the laboratory facilitate the observation of particularities related to development, behavior, and/or habits of arthropods and plants and their interactions. This study aimed to design an automated barometric chamber for research on arthropod behaviors and insect–plant interactions in the laboratory. The barometric chamber is a transparent box equipped with a single-board computer. An air pump and two proportional solenoid valves were used as actuators to control the air flow, while barometric pressure, air humidity, and temperature sensors were used to monitor the conditions within the chamber. A graphical user interface to operate the barometric chamber was developed to run in a web browser. The barometric chamber was designed to allow the barometric pressure to be changed by up to 15 hPa with respect to the local barometric pressure. In addition, the control system makes it possible to set the rise/fall time (ramp) corresponding to the duration in which a change of pressure will be conditioned. Short- and long-term evaluations demonstrated that the control system can assure pressure stability of ±0.1 hPa with respect to the setpoint value. For demonstration purposes, two experiments were carried out to evaluate the influence of barometric pressure on the feeding activity of Euschistus heros and Diabrotica speciosa. For E. heros, the number of stylet sheath was significantly increased under high pressure conditions compared to the low pressure. However, for D. speciosa, there was no statistical difference in leaf consumption at the evaluated testing conditions.
1 September 2017 in Revista Brasileira de Engenharia Agrícola E Ambiental
Laboratory tests for technical evaluation or irrigation material testing involve the measurement of many variables, as well as monitoring and control of test conditions. This study, carried out in 2016, aimed at using statistical quality control techniques to evaluate results of dripper tests. Exponentially weighted moving average control charts were elaborated, besides capability indices for the measurement of the test pressure and water temperature; and study on repeatability and reproducibility (Gage RR) of flow measurement system using 10 replicates, in three work shifts (morning, afternoon and evening), with 25 emitters. Both the test pressure and water temperature remained stable, with “excellent” performance for the pressure adjustment process by integrative-derivative proportional controller. The variability between emitters was the component with highest contribution to the total variance of the flow measurements, with 96.77% of the total variance due to the variability between parts. The measurement system was classified as “acceptable” or “approved” by the Gage RR study; and non-random causes of significant variability were not identified in the routine of tests.
5 April 2021 in Revista Brasileira de Engenharia de Biossistemas
Brazil is the second-largest producer of ethanol and the alcoholic fermentation wastes have become a concern for both environmental and economic reasons. Recently, the Brazilian industry has implemented the second generation (2G) process to attend the growing for biofuel. In this study, we aimed to investigate whether the 2G vinasse faces the same environmental challenges that first generation (1G) vinasses do, meaning vinasses from ethanol processes using sugarcane juice and/or molasses. Thus, vinasse was obtained from one of the recently-started 2G ethanol facilities in São Paulo State and then chemically characterized. Considering glycerol, mannitol, residual sugars, and organic acids concentrations altogether, it was determined that 2G vinasse had a total carbon source of 23,050 mg L-1 (compared to 4,800 mg L-1 in 1G vinasse). Magnesium, calcium, potassium, and others salts were determined as well. Based on its chemical composition, vinasses could be considered as nutrient sources for other bioprocesses. Finally, we brought some perspectives into bioprocesses with nutritional requirements that might be fully or partially provided by vinasses, leading to the production of bioenergy or bioproducts.