To develop a wearable multi-lead electrocardiogram (ECG) measuring system, we fabricated the electrodes and wires by using electrostatic flocking technology on a textile. By using this technology, it was possible to fabricate many electrodes and wires, simultaneously. Also the flocked electrodes and wires had stretchability and washing resistance properties. To use dry electrodes, it is important to reduce the influence of motion artifacts (MAs). The results of the experiment with the skin phantom revealed that the contact pressure between the skin and the electrode is an important factor in MA reduction. Then, we conducted experiments with a human body to determine the relationship between the contact pressure and the MAs. Under the pressures of 200 Pa and 500 Pa, MAs were observed. Meanwhile, under the pressures of 1000 Pa, 2000Pa and 4000 Pa, the ECG signals under rest and deep breathing conditions were able to be measured without MAs. Considering the comfortability, the contact pressure from 1000 Pa to 2000 is preferable. Finally, we fabricated the wearable ECG measuring system and succeeded in measuring 18-lead ECG signals. The measured ECG waveform is in good agreement with the ECG waveform measured by a commercial system.
Recent advancements in terahertz wave applications for sensing, imaging, and high-speed communication have spurred a substantial demand for low-cost, easily accessible optical components capable of manipulating terahertz wave polarization. In this study, terahertz circular dichroism spectroscopic measurements of micrometer-sized metallic chiral helix arrays, fabricated using computer numerical control (CNC) machining, are presented. Experimental results demonstrate a giant circular dichroism of ±0.6 in an axial mode of operation for left- and right-handed arrays within a sub-terahertz frequency range. The helix array converts linearly polarized light into circularly polarized light from 120 GHz to 200 GHz, with a 3 dB axial ratio relative bandwidth approaching 50%. The polarization extinction ratio is in excess of 20 dB. These outstanding features, combined with their low cost, high accessibility, as well as their potential for mass production, pave the way for development of diverse range of optical components such as polarizers, filters, absorbers, and isolators operating in the terahertz frequency region.
20 February 2024 in IEEE Photonics Technology Letters
Chiral metamaterials, such as helix arrays, have attracted significant attention due to their ability to manipulate the polarization properties of electromagnetic waves. The helix array can be used to fabricate a polarizer that selectively transmits circularly polarized light according to the handedness of the helix. However, the transmitted light is not purely circularly polarized due to unwanted circular polarization conversion. This letter presents numerical and experimental evidence that the random arrangement of helix orientation angle with respect to the polarization of incident light can reduce unwanted circular polarization conversion, making it possible to fabricate a circular polarizer with near-perfect ellipticity. The proposed method is applicable for efficient circular polarizer fabrication across the microwave, terahertz, and infrared regions of the electromagnetic spectrum.