6 July 2006 in Physica Status Solidi (b)
1 July 2008 in Phase Transitions
Resistance switching in transition metal oxide thin films has been observed in a variety of complex and binary oxides, and is the basis for development of non-volatile resistance random access memory (RRAM). We review here the electric-pulse induced resistance (EPIR) change effect, which is responsible for this switching and encompasses the reversible change of resistance of a thin oxide film under the application of short- and low-voltage pulses. Although the phenomenon has been observed in a number of oxide systems, there is still limited understanding of the origin of the resistance change. A recent model that has found fair acceptability incorporates oxygen ion/vacancy diffusion and pile-up near the interface region of the oxide at the impervious metal interface. Further efforts are still required to fine tune the model and apply it to the optimization of RRAM device development.
15 March 1996 in Physical Review B
Low-temperature photoluminescence spectra for various disordered thin-layer (GaAs(AlAs superlattices have been experimentally studied. The samples were grown by molecular-beam expitaxy (MBE) growth, and disorder was introduced by varying the thickness of GaAs and AlAs layers in the growth direction in various specific but randomly generated sequences. The photoluminescence from disordered superlattice samples shows a strong disorder sequence dependence. Disordered (GaAs(AlAs superlattices with m,n distributed in a range of 1–6 shows mainly a sharp peak at the high-energy side and a broad peak at the low-energy side. According to the study of the temperature, excitation-intensity, and disorder-sequence dependence of the photoluminescence, the sharp peak is assigned to bound-exciton recombination and the broad peak to the recombination of electron-hole pairs localized by a disorder potential induced by layer thickness disorder. Samples with m,n larger than 6 exhibit multiple peaks of similar recombination mechanism. In addition, the results demonstrate that the luminescence intensity of disordered superlattices at T=10 K can be increased by up to two orders of magnitude over that of ordered short-period superlattices. © 1996 The American Physical Society.
31 July 2013 in Thin Solid Films
9 June 2014 in Discover Nano
Fabrication of microporous structures for the anode of a thin film solid oxide fuel cell (SOFC(s)) using controlled etching process has led us to increased power density and increased cell robustness. Micropores were etched in the nickel anode by both wet and electrochemical etching processes. The samples etched electrochemically showed incomplete etching of the nickel leaving linked nickel islands inside the pores. Samples which were wet- etched showed clean pores with no nickel island residues. Moreover, the sample with linked nickel islands in the anode pores showed higher output power density as compared to the sample with clean pores. This enhancement is related to the enlargement of the surface of contact between the fuel-anode-electrolyte (the triple-phase boundary).