13 June 2022 in IEEE Transactions on Geoscience and Remote Sensing
Non-line-of-sight (NLOS) detection is an enduring topic as it provides a powerful tool to monitor visually blocked areas. Currently, NLOS detection requires precise prior knowledge of building layout, which limits its further applications in practice. In this article, we consider the problem of joint estimation of building layout and target location in the NLOS scenario by exploiting multipath returns. Specifically, first, the building layout is simplified into combined linear equations with unknown parameters. In this way, we establish a parametrized multipath propagation model in the multiple targets’ NLOS scenario for the multiple-input–multiple-output (MIMO) radar, which is used in the image reconstruction and layout estimation problem. Then, a shape remodeling group sparse constraint algorithm is proposed and combined with the particle swarm optimization method to simultaneously reconstruct the unknown layout and targets. Compared with the conventional compressed sensing-based methods, the proposed method integrates the basic structural characteristics and sparsity prior of the NLOS image to improve the stability of the solution. Finally, the performance of the proposed method is verified with numerical and experimental results.
19 April 2021 in IEEE Internet of Things Journal
Recently, wireless communication signals are not only used for information transmission but other possibilities are being developed, such as human body state estimation, wireless sensing, etc. In this article, the radio tomographic reconstruction of building layout and interior object is considered only utilizing the received signal strength indication (RSSI) of commercial WiFi signals. Specifically, first, an electromagnetic transmission energy attenuation model is introduced, which considers the case for scanning the entire unknown area using two wireless nodes. Then, we propose a novel algebraic iterative reconstruction method, which takes into account the constraint of prior knowledge and designs a more reasonable initial iteration factor. Finally, a variety of scenarios with different structures is built, and the reconstruction of the multimedia scenario is achieved for the first time with RSSI information. The simulation and experimental results show that the proposed method has better performance than current state-of-the-art algorithms in both the single-medium scenario and multimedia scenario.
26 July 2021 in IEEE Geoscience and Remote Sensing Letters
This letter studies the problem of ultrawideband (UWB) tomographic imaging for unknown building layouts where the multipath-rich condition is considered. Specifically, first, the multiple propagation paths of the UWB signal are analyzed, and a delay estimation algorithm is proposed to estimate the direct path (DP) delay from the multipath signal. Then, a tomographic projection model is established by mapping the relationship between the delay of the DP and the relative permittivity of the unknown layout. Besides, a modified total variation method is developed to reconstruct the building layout, which shows significant performance in preserving the edges of the structure. Finally, the effectiveness of the proposed algorithm is verified using both simulated and real data.
3 December 2015 in IEEE Transactions on Circuits and Systems II: Express Briefs
A metastability error detection and reduction technique for partially active analog-to-digital converters (ADCs) is presented. It detects the metastability condition by comparing the coarse ADC output with a predefined voltage level. The metastability of the proposed comparator-based and prior logic gate-based metastability detectors (MDs) is analyzed. The metastable probability of the MD is shown to be critical for reducing the ADC metastability rate. A 5-b partially active flash ADC with the proposed MD is fabricated in 0.13-μm CMOS. Measurement results show that the proposed technique reduces the ADC metastability error rate significantly, from 10 -6 to 10 -12 , which is consistent with the theoretical analysis.
30 July 2021 in IEEE Antennas and Wireless Propagation Letters
In this letter, we consider the tomographic imaging issue of layouts only using the received signal strength (RSS) of dual narrowband signals. Specifically, we first introduce the signal model which describes the relationship between RSS and the layouts in unknown scenario. Then, the propagation differences of dual-band signals are analyzed theoretically. Next, a joint iterative imaging method based on improved total variation constraint is proposed, and the arithmetic fusion strategy is used to obtain final result. Finally, the real data results demonstrate that the proposed approach with dual-band signals can retain the clear edge information of building structures and greatly reduce the artifacts in results.
12 December 2023 in IET Conference Proceedings
High-voltage line ice covering is not only related to the stable operation of the power grid, but also affects people's normal life and the operation of industrial and mining enterprises. At present, some exploration and research on the anti-ice melting technology of transmission lines have been carried out in foreign countries, and some research results have been applied to the process of transmission line melting, and the effect is also ideal after practice. However, due to the incomplete insulation of the overhead ground wire, when the ice is serious, the measures cannot be taken, resulting in the damage of the tower and the shutdown of the line. For this reason, the common ice melting methods are compared according to the ice melting mechanism. Three kinds of ground wire ice melting schemes are proposed, namely, ground wire series loop mode, ground wire parallel mode and long line section mode, to improve the overall ice melting capacity and range of high voltage transmission lines, and further improve the reliability of transmission lines.